• Periodicals

    Periodicals

    • Periodicals
    • Materials Evaluation
    • Research in Nondestructive Evaluation
    • The NDT Technician
    back
  • Conference Publications

    Conference Publications

    • Annual Conference
    • Research Symposium
    • Digital Imaging
    • ICPIIT
    • NDE of Aerospace
    • Structural Materials Technology
    • NDT Of Composites
    • US-Japan NDT Symposium
    • Ultrasonics for NDT
    back
  • Methods

    Methods

    • Acoustic Emission Testing (AE)
    • Electromagnetic Testing (ET)
    • Ground Penetrating Radar (GPR)
    • Guided Wave (GW)
    • Laser Testing (LM)
    • Leak Testing (LT)
    • Liquid Penetrant Testing (PT)
    • Magnetic Flux Leakage (MFL)
    • Magnetic Particle Testing (MT)
    • Microwave Testing (MW)
    • Neutron Radiographic Testing (NR)
    • Radiographic Testing (RT)
    • Thermal/Infrared Testing (IR)
    • Ultrasonic Testing (UT)
    • Vibration Analysis (VA)
    • Visual Testing (VT)
    back
  • Advanced Search
  • Subscribe
Advanced Search »
  • Periodicals
    • Materials Evaluation
    • Research in Nondestructive Evaluation
    • The NDT Technician
  • Conference Publications
    • Annual Conference
    • Research Symposium
    • Digital Imaging
    • ICPIIT
    • NDE of Aerospace
    • Structural Materials Technology
    • NDT Of Composites
    • US-Japan NDT Symposium
    • Ultrasonics for NDT
  • Methods
    • Acoustic Emission Testing (AE)
    • Electromagnetic Testing (ET)
    • Ground Penetrating Radar (GPR)
    • Guided Wave (GW)
    • Laser Testing (LM)
    • Leak Testing (LT)
    • Liquid Penetrant Testing (PT)
    • Magnetic Flux Leakage (MFL)
    • Magnetic Particle Testing (MT)
    • Microwave Testing (MW)
    • Neutron Radiographic Testing (NR)
    • Radiographic Testing (RT)
    • Thermal/Infrared Testing (IR)
    • Ultrasonic Testing (UT)
    • Vibration Analysis (VA)
    • Visual Testing (VT)
Advanced Search »

Help - Sitemap

  • ASNT NDT Library
    • Periodicals
      • Materials Evaluation
      • Research in Nondestructive Evaluation
      • The NDT Technician
    • Conference Publications
      • ASNT Annual Conference
      • ASNT Research Symposium
      • Digital Imaging
      • International Chemical and Petroleum Industry Inspection Technology Conference
      • Nondestructive Evaluation of Aerospace Materials & Structures
      • NDE/NDT for Highway and Bridges: Structural Materials Technology
      • NDT Of Composites
      • US-Japan NDT Symposium
      • Ultrasonics for Nondestructive Testing
    • 2019
      • Analysis of GPR and FWD Data Dependency Based on Road Test Field Surveys
      • Application of Visual and Ultrasonic Testing in the Remediation of Corrosion-Resistant Alloy Pipe for Oil and Gas Production
      • Bobbin, Nonmultiplexed Array, and Multiplexed Array Eddy Current Probes for Heat Exchanger Inspection
      • Critical examination of ultrasonic transducer characteristics and calibration methods
      • EMATs for Thickness Gauging: Principle and Application
      • Evaluation of Bonding Quality in the Carbon Fiber–Reinforced Polymer (CFRP) Composite Laminates by Measurements of Local Vibration Nonlinearity
      • FISTA Algorithm for Radiography Images Enhancement with Background Blurring Removal
      • Frequency modulated thermal wave imaging for visualizing power density of electromagnetic waves on plane surfaces
      • Grain size correction of welding residual stress measurement in a carbon steel plate using the critical refraction of longitudinal waves
      • Investigation of Morphology Techniques Capability for the Enhancement of Ultrasonic C-Scan Images of Composite Patches
      • Microstructural Damage Due to Thermal Aging in Turbine Casings Observed with NDT: A Case Study
      • Orion Heat Shield Bond Quality Inspection: Complete Inspection System
      • Orion Heat Shield Bond Quality Inspection: Developing a Technique
      • Orion Heat Shield Bond Quality Inspection: Engineering a Technique
      • Perforation of Thin Aluminum Targets Under Hypervelocity Impact of Aluminum Spherical Projectiles
      • Quantile POD for nondestructive evaluation with hit–miss data
      • The Advantage of Using a Smaller Focal Spot for NDT Applications
      • The Next Revolution in Nondestructive Testing and Evaluation: What and How?
      • Ultrasonic Thickness Measurements of Thin-Walled Composite Steel Pipe
    • 2018
      • 3D Imaging for Nondestructive Testing
      • 3D Imaging for Nondestructive Testing – Part 2
      • A Common Operating Platform for Employing UAVs in Infrastructure Monitoring
      • Adaptive Discretization for Computerized Tomography
      • Additive Manufacturing: The Rise of a Technology and the Need for Quality Control and Inspection Techniques
      • Addressing the Need to Monitor Concrete Fatigue with Nondestructive Testing: Results of Infrastar European Project
      • Advanced Volumetric Phased Array Inspection for Un-Bored Steam Turbine Rotors
      • Aerial vs. Vehicle-Based Infrared Thermography for Bridge Deck Delamination Detection
      • AE Source Localization in a Steel Plate with the Dispersive A0 Mode based on the Cross-Correlation Technique and Time Reversal Principle
      • Algorithms for the Magnetic Assessment of Proton Exchange Membrane (PEM) Fuel Cells
      • Alternating Current Field Measurement Testing
      • Analysis of Magnetic Flux Leakage Testing for Longitudinal Discontinuities in Sucker Rods
      • A New Nomogram Proposal to Determine Concrete Compressive Strength by Combined Nondestructive Testing Methods
      • An Overview of Nondestructive Evaluation and Characterization at Lawrence Livermore National Laboratory
      • Applicability of the Magnetic Barkhausen Noise Method for Nondestructive Measurement of Residual Stresses in the Carburized and Tempered 19CrNi5H Steels
      • Applications of a Compact NDT Shearography System Specially Designed for the Petroleum and Gas Industry
      • A predictive model for characterizing hardness of D2 tool steel by eddy current method: A statistical optimization approach
      • Automatic Ultrasonic Testing Technique for AZ80 Magnesium Alloy Cartridges
      • Blind Trial Validation of a Guided Wave Structural Health Monitoring System for Pipework
      • Bridge Monitoring Utilizing Smart Portable Sensing System
      • Camera Encoded Phased Array for Semi-Automated Inspection of Complex Composite Components
      • Cataloging Flaws for Additive Manufactured Components Is a Red Herring
      • Characteristics of Wave Propagation in Austenitic Stainless Steel Welds and Its Application in Ultrasonic TOFD Testing
      • Characterization of Bonding Agent Durability in Fatigue Monitoring Applications Utilized in NDT
      • Characterization of Damage Using Ultrasonic Testing on Different Types of Concrete
      • Characterization of Hydrogen Embrittlement in 2.25cr-1mo-0.25v Steel by Eddy Current Method
      • Condition Assessment of Concrete Beam Using a Laser Vibrometer
      • Construction Site Evaluation Employing 3D Models from UAV Imagery
      • Creating a Trend-setting Vision for NDE Technology and Driving the Change
      • Decommissioned Bridges: Ideal Test Objects for Demonstrating the Capabilities of Nondestructive Testing Methods
      • Demonstration of a Spectral Profile Multiplexing Algorithm to Demodulate Fiber Bragg Grating Strain Sensors with a Narrowband Light Source
      • Detection and Classification of Discontinuities using Discrete Wavelet Transform and MFL Testing
      • Detection of Buried Trolley Tracks Using Multichannel 3D Ground Penetrating Radar Tech
      • Detection of Impact Damage in Carbon Fiber Composites Using an Electromagnetic Sensor
      • Detection of ion ingress by laser induced breakdown spectroscopy for evaluation remaining lifetime of a concrete structure
      • Dichotomy of Fluorescent Penetrant Inspection Reliability Challenges versus Opportunities for Improved Performance and Capability
      • Dynamic Strain Measurements on a Complex Freeway Bridge
      • Eddy Current Detection of Retained Austenite in Ni-Hard4 Cast Iron
      • Eddy Current Testing of Delamination in Carbon Fiber Reinforced Polymer (CFRP): A Finite Element Analysis
      • Education, Training, and the Facts of Life
      • Effect of Structural Parameters on Coupling Interference of Arrayed Eddy Current Testing
      • Effects of Concrete Delamination and Cracking on Electrical Resistivity Measurement Results
      • Electrical Resistance Tomography–Based Sensing Skin with Internal Electrodes for Crack Detection in Large Structures
      • Electrical Resistance Tomography Based Sensing Skin with Internal Electrodes for Crack Detection in Large Structures: Preliminary Results Standard Difference Imaging Study
      • Establishing a Micro Radiation Protection Zone
      • Evaluation of Aluminium Alloys Degradation in Aging Aircraft
      • Evaluation of Pavement Performance under FWD Test through Instrumented Pavement Section
      • Experimental Measurement of Metal Strength and Stiffness Using a Double-Side 3D Digital Image Correlation Setup
      • Experimental Nondestructive Characterization of an Aluminum Alloy Prepared by Powder-Bed Additive Manufacturing
      • Fast Ultrasonic Imaging with Total Focusing Method (TFM) for Inspection of Additively Manufactured Polymer Composite Component
      • Feasibility of a New Moving Collimator for Industrial Backscatter Imaging
      • Feasibility Study for Improving the Image Characteristics in Digital Tomosynthesis (DTS) Using a Compressed-Sensing (Cs)-Based Pre-Deblurring Scheme
      • Field Validation of Multipurpose Wireless Sensors for Bridge Assessment
      • Field Verification for B-WIM System using Wireless Sensors
      • Flaw Detection Capabilities in Aerospace with Eddy Current Array Technology
      • Flexible Sensors for NDI of Curved Surfaces on Turbofan Components
      • Fracture Mechanics–based Acceptance Criteria and Discontinuity Sizing with Phased Arrays
      • Full-Depth Assessment of Concrete Bridge Decks in A GPR Survey: A Machine Learning Approach
      • Full Matrix Capture and Total Focusing Method: The Next Evolution in Ultrasonic Testing
      • Fully Automated Visualization of Concrete Bridge Deck Condition from GPR Data
      • I-235 Bridge Load Test Combine with Acoustic Emission Monitoring
      • Implementation of Special PA UT Techniques for Manufacturing Inspection of Friction Stir Welds
      • Impulse-Response Testing for Quality Assessment of Cast-In-Place Concrete Pile Foundations
      • Inferring Dynamic Characteristics of a Bridge through Numerical Simulation and and Low-Magnitude Shaking as a Global NDE Method
      • Infrared and High-definition Image-based Bridge Scanning Using UAVs without Traffic Control
      • In-Line Inspection of Friction Stir Welds Using Laser Ultrasonics
      • In Situ Inspection Of Concrete Structures Using A Rolling Ultrasound Scanner
      • Inspection of Bend Discontinuities Based on the Comparison of the Frequency Responses of Ultrasonic Guided Waves in Small Diameter Tubes
      • Inspection of Welding Discontinuities in Tubular-Type Transmission Towers Using Metal Magnetic Memory
      • Inspection on the Complex Foundations of Overwater Bridges
      • Inverse Wave Field Extrapolation, the Next Generation of Ultrasonic Inspection
      • Inversion of Air-Coupled Surface Wave Pavement Testing Data Based on Individual Receiver Spacing Approach
      • Investigation of the Deep Drawing Process by Means of Acoustic Emission Characteristics
      • Laser Ultrasonics for Remote Detection of Stress Corrosion Cracking in Harsh Environments
      • Life-Cycle NDT Planning of Fatigue-Critical Bridge Details Based on Discounted Discounted Utility Theory
      • Metasurface Based Surface Crack Sensor using Asymmetric Complementary Split Ring Resonator
      • Microwave and Millimeter Wave Nondestructive Testing Principles
      • Moisture Measurements in Heritage Masonries: A Review of Current Techniques
      • My 27 Years of Innovations in NDE: From Inventor’s School to Development of a New NDE Method
      • NASA's Nondestructive Evaluation Team: An Overview
      • NDT Inspection of Concrete Structures: Complementarity of Ground Penetrating Penetrating Radar, Ultrasonic Tomography and Eddy Current methods
      • NDT Methods Applicable to Health Monitoring of ABC Closure Joints
      • NDT Procedures in Relation to Quality Assurance and Validation of Nondestructive Testing in Civil Engineering
      • NDT Women: Industry Veterans Discuss the Opportunities, Challenges, and Triumphs of the NDT Community
      • New Tools in CIVA for Model Assisted Probability of Detection (MAPOD) to Support NDE Reliability Studies
      • Non-contact Surface Wave Testing Inversion by Artificial Neural Networks
      • Nondestructive Assessment of a Retaining Wall of Former Coal Mine Plant
      • Nondestructive Evaluation of Additively Manufactured Metal Components with an Eddy Current Technique
      • Nondestructive Evaluation of Concrete Material Properties for Nuclear Power Plant Survey: Results in the Laboratory and on the VeRCoRS Mock-Up
      • Nondestructive Evaluation of Far-Side Corrosion Around a Rivet in a Multilayer Structure
      • Non-destructive Measurements of Residual Stresses in Bridges Using an Ultrasonic Method
      • Nondestructive Testing and Evaluation of Materials at the US Army Research Laboratory
      • Nondestructive Testing and Evaluation of Reinforced Concrete Bridge Decks: A Case Study
      • Nondestructive Testing for Metal Parts Fabricated Using Powder-Based Additive Manufacturing
      • Nondestructive Testing in Civil Engineering Requirements for the practical application and state of the art in Switzerland (Research Project AGB 2012/016 for the Federal Roads Office; FEDRO)
      • Nondestructive Testing of Composites
      • Nondestructive Testing of Heat Exchanger Tubes in Balance of Plant using Bobbin Coil and Bobbin-Type Integrated Hall Sensor Array
      • Nondestructive Testing of Single Crystal Alloy by X-ray Diffraction
      • Nondestructive Testing of Welding Defects in a Tubular-Type Transmission Tower using Magnetic Imaging with Magnetic Sensor Array
      • Nondestructive Testing Research and Capabilities at Pacific Northwest National Laboratory
      • Nondestructive Testing Research and Development Efforts at Argonne National Laboratory: An Overview
      • Nuclear Power Plant containment wall mock-up for long-term NDE
      • On the Use of Unmanned Aerial Vehicles in Nondestructive Evaluation of Civil Infrastructure
      • Opportunities for the Use of Electronic Distance Measurement Instruments in Nondestructive Testing and Structural Health Monitoring and Implications for ASNT
      • Optimization of Periodic Permanent Magnet Configuration in Lorentz-Force EMATs
      • Optimization of SAW-type Surface Wave Ultrasonic Sensors for Ultrasonic SHM
      • Overview of the Nondestructive Evaluation Research Laboratory at the Federal Highway Administration
      • Passenger Vehicle Effect on the Truck Weight Calculations using B-WIM System
      • Phase Analysis of Data from Air-Coupled Impact Echo Testing of Concrete Decks
      • Proper Basic Thermal Imager Settings for Thermographic Inspections
      • Property Evaluation of 2Cr13 Tempered Steel Based on the Magnetic Memory Technique
      • Prospects for Integrating Augmented Reality Visualization of Nondestructive Testing Results into Model-based Infrastructure Inspection
      • ProTimB - Monitoring of Structurally Protected Timber Bridges
      • Pulsed Eddy Current Testing
      • Quality Classification of Adhesive Bonds in Composite Structures by Single-sided Air-coupled Ultrasonic Testing Using Linear Phased Array Probes
      • Quality Management of Concrete Construction by Digitalizing the Process Chain from Batching Plant to Building
      • Quantified Non-destructive Evaluation of a Concrete Bridge Using Coda Wave Interferometry
      • Quantitative MFL Testing Technique for Strand Rope Based on a Small Number of Discontinuity Samples
      • Quantitative Phase-Space Nonlinear Ultrasound (PSNU)
      • Quantitative Ultrasonic Beam Profiles of Conventional Single-element Probes
      • Real-Time Characterization of Laser-Generated Melt Pools using Ultrasound
      • Reliability Investigation of Sizing Horizontal Planar Discontinuities Using a New Time of Flight Diffraction Technique
      • Seismically Damaged Structure Assessment Under Subsequent Extreme Events
      • SHM POD and POT
      • Signal Characteristics of Circular Induction Coil Influenced by Scanning Spatial Location in MFL
      • Smart Concrete for Enhanced Nondestructive Evaluation
      • Smart Sound Processing for Residual Thickness Estimation using Guided Lamb Waves generated by EMAT
      • Structural Health Monitoring of a Vertical Lift Bridge Using Vibration Data
      • System Identification of a Bridge Gusset-Less Connection by Simplified and Detailed Local Analytical Models
      • Testing Seismic Techniques for Imaging Structural Defects in Engineered Drilled Shafts – A Case Study
      • Test Specimen Concepts in Regard to Quality Assurance and Validation of Nondestructive Testing in Civil Engineering
      • The Application to the Transportation Industry of Advancing Drone Use Beyond Visual Inspection: The Emergence of Contact Based Nondestructive Testing (NDT) at Height Utilizing Aerial Robotic Systems
      • The Effectiveness of Ultrasonic Peening Improvement Treatment in Maintenance and Repair of Bridges
      • The LAUS: First Applications of a New System for Ultrasonic Imaging of Very Concrete Structures
      • Thermal Design of Hybrid Materials Produced via Ultrasonic Additive Manufacturing
      • Thickness and Density Prediction of Thin Asphalt Concrete Overlay Using GPR
      • Time-Delay Estimation of Ultrasonic Testing Signals by a Combination of Cross Correlation and Response Surface Method
      • Time Resolution Improvement of Linear Chirp Excitation Ultrasonic Testing Based on Frequency-Phase-Amplitude Modulation Excitation
      • Ultrasonic monitoring of full-scale load experiments
      • Ultrasonic Velocity and Attenuation in Epoxy Resin/Granite (Marble) Powder Composite
      • Unmanned Aerial Vehicle (UAV)-Based Assessment of Concrete Bridge Deck Delamination Using Thermal and Visible Camera Sensors: A Preliminary Analysis
      • Using Iterative Time Reversal for NDT Inspections on Composite Materials
      • Using Magnetoresistive Sensors in Nondestructive Testing
      • Using Ultrasonic and Finite Element for Residual Stress Evaluation of a Gas Transmission Pipeline
      • Utilizing Water Contact Angle Measurements to Predict Surface Preparedness for Dye Penetrant Application
      • Vertical Profiling Ultra-Seismic Inspection to Evaluate Model Pile Depths
      • Wave Propagation in Damaged Composite Materials
      • Wireless Structural Health Monitoring System Based on a Piezoelectric Fatigue Fuse
    • 2017
      • Absolute Measurement and Relative Measurement of Ultrasonic Nonlinear Parameters
      • Accuracy, Precision, and Confidence in X-ray Fluorescence for Positive Material Identification
      • A Comprehensive Model for Hardness Evaluation of Low-Alloy Steels Based on Carbon Content and Ultrasonic Wave Velocity
      • Advanced Algorithms to Enhance Signal to Noise Ratio of Peel Ply at the Bondline of Out-of-Autoclave Composite Assemblies
      • Advancements in Welding LIghtweight Metals to Steel
      • Air-coupled Non-Contact Ultrasound for SHM of Composites
      • Air-Coupled Ultrasonic Testing of Rails: Experimental Prototype and Finite Element Simulations
      • A Model of Metal Magnetic Memory Crack Testing on a Rectangular Parallelepiped
      • A New Detection Sensor for Wire Rope Based on Open Magnetization Method
      • An Experimental Study of Discontinuities in Friction Stir Welded Joints through Nondestructive Testing
      • An Introduction to Long-Range Screening Using Guided Waves
      • A Novel Non-Invasive Method for Extraction of Geometrical and Texture Features of Wood
      • An Ultrasonic Guided Wave Signal Processing and Pattern Recognition Tool for Studying the Discontinuity Axial Length
      • Application of Nondestructive Testing Used in Optical Metrology for the US Army
      • Application of Potentiostatic Etching for Nondestructive Testing of Accumulated Plastic Strain in Austenitic Stainless Steels
      • Assessment of Thermal Aging of Aluminum Alloy by Acoustic Nonlinearity Measurement of Surface Acoustic Waves
      • Automatic Vision System for Wheel Surface Inspection and Monitoring
      • Autonomous Detection of Concrete Cracks on Bridge Decks and Fatigue Cracks on Steel Members
      • Autonomous Navigation and Geotagging for Concrete Bridge Deck Inspections with the RABIT Robotic Platform
      • Bridge Curvature for Detecting Bridge Damage Location
      • Bridge Damage Detection using the Inverse Dynamics Optimization Algorithm
      • Capability of Infrared Thermography for Bridge Inspection: Correlation Between Delamination Size and Detectable Depth
      • Changes of Ultrasonic Guided Waves Propagating Through a Bend
      • Characterization of Microcracking in Polymer Concrete Using Multiple Scattered Waves Under Steady-State Vibration Conditions
      • Characterizing Surface-breaking Cracks through Eddy Current NDE and Model-based Inversion
      • Classification of Nondestructive Inspection Techniques with Principal Component Analysis (PCA) for Aerospace Application
      • Cloud Solutions: The Criteria, the Pros and Cons for the NDT Industry
      • Comparative Assessment of Thermal NDT Data Processing Techniques for Carbon Fiber Reinforced Polymers
      • Comparative Study for More Reliable Use of Infrared Thermography for High-speed Concrete Bridge Deck Scanning
      • Comparing Automated Image-Based Crack Detection Techniques in the Spatial and Frequency Domains
      • Comparison Between Using Longitudinal and Shear Waves in Ultrasonic Stress Measurement to Investigate the Effect of Post-Weld Heat-Treatment on Welding Residual Stresses
      • Comparison of Phased Array Ultrasound to Conventional Ultrasound and Radiographic Testing for Bridge Welds
      • Comprehensive Site Integrity Assessments and Mitigations for Unbonded Flexible Pipes
      • Comprehensive Structural Health Monitoring at Local and Global Level with Vision-based Technologies
      • Continuous Measurement of Residual Stress on Weld of Power Transmission Tower Using Linearly Integrated GMR Sensor Arrays
      • Corrosion Under Insulation Inspection Challenge
      • Critical Element Alloy Material Testing/PMI Using Handheld X-Ray Fluorescence
      • Current Density Reconstructions for Lorentz Force Evaluation
      • Deployment of a Practical CUI/CUF Assessment Tool for Pressure Vessels and Piping Systems
      • Deployment of Cellular-Based Ultrasonic Corrosion Measurement System for Refining & Petro-Chemical Plant Applications
      • Design Detection in Art Objects Using the Dual-domain Technique
      • Deterioration and Contamination of Developers Used in Liquid Penetrant Testing
      • Development and Validation of NDE Standards for NASA’s Advanced Composites Project
      • Development of Surface Crack Sensors using Fractal Geometries of Complementary Split Ring Resonators
      • Digital Detector Array Image Quality for Various GOS Scintillators
      • Discussion of Inspection Requirements
      • Drive-by Bridge Damage Detection Using Non-specialized Vehicle
      • Drive-by Bridge Inspection Using Inverse Dynamics Optimization Algorithm
      • Effect of Curing Condition and Temperature on Surface Resistivity Measurements
      • EMAT Generated Shear Horizontal Wave Interactions with Defects in Welded Steel Plate Structure
      • Enhanced Tire Quality Controls by Novel X-ray Digital Detectors
      • Environment-Assisted Corrosion Cracking in Carbon Steels Utilizing Advanced Ultrasonic Techniques
      • Evaluating Damage in Simple-span Prestressed Concrete Girders using Acoustic Emission: Laboratory Specimens and Existing County Bridge
      • Evaluation of Adhesive Joints with Ultrasonic Digital Image Correlation
      • Evaluation of degradation or lack of Insulation in Tank Cars utilizing Thermal / Infrared Testing
      • Evaluation of Laser Powder Bed Fusion Additive Manufacturing with Array Eddy Current Technology
      • Experimental Observation of Phased Array Guided Wave Application in Composite Materials
      • Fatigue Performance Evaluation of 2Cr13 Plate Quenched Specimens Using the Magnetic Memory Technique
      • Field Verification for Drive-by Bridge Monitoring using Non-specialized Inspection Vehicle
      • Finite Element Simulation of Real-time Health Monitoring of Steel Rod using Active Fiber Optic Sensors
      • Full Matrix Capture for Ultrasonic Imaging through Brazed Surfaces
      • Geophysical Investigations at Cairo's Oldest, the Church of Abu Serga (St. Sergius), Cairo, Egypt
      • Goals of the Inspection for the Buried Nuclear Waste Tanks
      • Ground Penetrating Radar for Transportation Infrastructure Applications
      • Guided Wave Phased Array Technology for Rapid Inspection of Hanford Double Shell Tank Liners
      • Handheld Fourier Transform Infrared Spectroscopic Characterization of Ceramic Matrix Composites
      • Heat Exchanger Tubing: Extending the Reach of IRIS Inspections
      • High-Speed Phased Array UT for Rail Flaw Characterization
      • How to STEM: Demonstrating NDT to Students in 30 Minutes or Less
      • Identifying Localized Bridge Damage Using Frequency Domain Decomposition
      • Imaging of Nonaxisymmetric Area Discontinuities in Pipes Using Guided Wave Synthetic Focusing
      • Improved Modulated Excitation for Imaging and Parameter Identification Applications
      • Increased Process Safety and Efficiency Through Automated Defect Recognition (ADR) in X-ray Inspection
      • Increased Process Safety and Efficiently through Automated Defect Recognition (ADR) in X-ray Inspection
      • Industrial X-ray Inspection: A Guide to Customized Inspection Solutions and Digital Radiography--Part 1
      • Industrial X-ray Inspection: A Guide to Customized Inspection Solutions and Digital Radiography – Part 2
      • Industrial X-ray Inspection: A Guide to Customized Inspection Solutions and Digital Radiography – Part 3
      • Infrared Inspection Program for Fired Heater Mechanical Integrity
      • Innovative Methods in Nondestructive Tunnel Evaluation
      • Inspection of Double-Shelled Storage Tank Bottoms using Ultrasonic Guided Waves from Side Wall
      • Inspection of Hanford Double Shell Tank Bottom Using Electromagnetic Acoustic Transducer (EMAT) Techniques
      • Inspection Programs for Internal Corrosion in Piping
      • Instrumentation and Structural Health Monitoring of a Vertical Lift Bridge
      • Inter-tile Gap Detection in Vehicle Add-on Ceramic Armor Using Capacitive Sensing
      • Introduction to Digital Radiography (DR) Systems, Its Operating Principles and Efficient Installation Process
      • Investigating the Feasibility of Ultrasonic Shear Actuation for Evaluation of Adhesive Joints in Multilayered Structures: FE Simulation
      • Investigation of Discontinuities in Friction Stir Welding of 2024 Aluminum Alloy using Radiography
      • Is That Flaw Really There?
      • Large Area High Resolution Detector for Thermal Neutron Radiography
      • Liquid Penetrant Wastewater Processing: New Developments
      • Magnetic Flux Leakage Testing Using Distribution of Magnetic Field on the Section Area of Welding
      • Marsupial Miniature Robotic Crawler Development and Deployment in Nuclear Waste Double Shell Tank Refractory Air Slots
      • Martensitic Transformation Acoustic Emission Signal Processing Based on the Information Entropy
      • Measuring the Attenuation Coefficient of Ultrasonic Beams in Materials
      • Merging Three NDT Techniques into a Single Structural Health Monitoring System
      • Microwave and Millimeter Wave High-resolution Imaging of Voids in a Rubber Composite Sheet
      • Microwave NDT: An Inspection Method
      • Microwave Synthetic Aperture Radar Imaging for Nondestructive Evaluation of Mechanically Stabilized Earth Walls
      • Mockup Evaluation of Magnetostrictive Transducers for Guided Wave Monitoring of Pipe at 200 °C
      • Monitoring System with Thin-Film UT Sensor for Power Plant
      • MRAD: Means for Rapid Algorithm Development
      • NDE Characterization Capability Evaluation
      • NDT Using Digital Laser Speckle Image Correlation (DiLSIC)
      • Network-Distributed Ultrasound
      • New Approach for X-ray Weld Inspection of Pipeline Segments
      • Nondestructive Condition Assessment Techniques for the Ethylene-Propylene Rubber Cable
      • Nondestructive Evaluation on Strain Sensing Capability of Piezoelectric Sensors for Structural Health Monitoring
      • Nondestructive Examination (NDE) of Used Fuel Containers for Increased Probability of Detection
      • Nondestructive Inspection of Welds on Pipe Using Scan-type Magnetic Camera
      • Nondestructive Testing Report Writing
      • Nonlinear Acoustic Testing for Concrete Materials Evaluation
      • Nonlinear Ultrasonic Damage Characterization of Limestone
      • Opportunities for Nondestructive Evaluation: Quantitative Characterization
      • Performance Testing of Computed Radiography System and Imaging Plates
      • Phased Array Ultrasonic Testing for Post-Weld and OnLine Detection of Friction Stir Welding Defects
      • Pinhole Imaging Standard Method in the Determination of the Focal Spot of an X-Ray Tube for the Evaluation of Quality of Radiographic Images of Welded Joints
      • PolyCT - Upgrade for Industrial CT-Scanners
      • PolyCT – Upgrade for Industrial CT-Scanners
      • PolyCT – Upgrade for Industrial CT-Scanners
      • Process Compensated Resonance Testing Models for Quantification of Creep Damage in Single Crystal Nickel-based Superalloys
      • Push-Pull Unit for Video Inspection of Double Shell Storage Tank Bottom Slots
      • Quantitative Assessment of CFRP-concrete Cylinders Using Synthetic Aperture Radar Images
      • Quantitative Characterization of Stress Concentration of Low-carbon Steel by Metal Magnetic Memory Testing
      • Rapid Large Area Inspection from a Single Sensor Position: A Guided Shear Wave Phased Array Scan
      • Rayleigh and Surface Acoustic Waves: What Are the Differences?
      • Real-tme Imaging of Time-varying Magnetic Field Intensity and Phase Shift Using Cylinder-type Magnetic Camera
      • Remote NDT Field Applications and User Cases
      • Replica Metallography: An NDT Technique for Condition Assessment of Gas Turbine Components
      • Research Council Mentoring Program: A Success Story
      • Resonant Ultrasonic Activation of Damage: Application for Diagnostic Imaging
      • Safe Distance for Gamma Radiography
      • Setup for Acoustic Emission Testing
      • Small Controlled Area Radiography – Fundamentals and Technology Advancements
      • Smart Concrete for Enhanced Nondestructive Evaluation
      • Steel Bridge Research, Inspection, Training, and Engineering Center at Purdue University
      • Structural Monitoring of the Delaware River Turnpike Bridge Emergency Repairs
      • Subsurface Discontinuity Detection in Composites by Infrared Testing
      • Successful Ultrasonic Inspection of Austenitic Welds
      • Suppression of Geometric Distortion in CT Image Due to Truncated Projection
      • Synthetic Focusing of Sound Beam Using Linear Array
      • Test and Evaluation Process for Proposed Double Shell Tank Bottom Inspection Technologies
      • Thermal Imaging for Concrete Bridge Decks
      • Thermoelastic Finite Element Modeling of Laser Generated Ultrasound in Additive Manufacturing Materials
      • The Role of Integration in NDT Quality Assurance Chain
      • The Time Is Now For Intelligent Leaders To Embrace Technology
      • Toward Characterization of Single Crystal Elastic Properties in Polycrystalline Materials using Resonant Ultrasound Spectroscopy
      • Ultrasonic Advanced Imaging Techniques
      • Unveiling Faults in Composite Materials by Suppressing Axial and Lateral Coherent Noise with Modulated and Time Coded Excitation
      • Use of the Ultrasonic Cylindrical Guided Wave Technique for Inspecting Rod Geometries
      • Utilizing Water Contact Angle Measurements to Predict Surface Preparedness for Dye Penetrant Application
      • Wavelet Based Damage Assessment and Localization for Bridge Structures
    • 2016
      • A Capacitive Sensor for Nuclear Power Plant Cable Monitoring
      • Acceptance Criteria for UV Discharge Detection
      • A Comparative Study on the Characteristics Between Different Computed Tomographic Acquisition Techniques
      • Acoustic Emission Tests on Steel Samples with Increasing Calibrated Planar Defects. Different Behavior of Material Due to Increasing Stress. Interpretation of the Results in the Context of String Theory
      • A Defect Evaluation Methodology Based on Multiple Magnetic Flux Leakage (MFL) Testing Signal Eigen Values
      • A Digital Facility Approach to the Collection and Analysis of NDT for the Refining and Petrochemical Industries
      • Advances in Phased Array Weld Inspection Scan Plan Designs – Use of Compound S-scan for Improved Weld Flaw Detection and Sizing
      • A Generalizable Radiography Algorithm Test Environment for NDE Applications
      • Aging Aircraft NDT
      • Air-Coupled Ultrasonic Testing of Rails
      • Air-Coupled Ultrasonic Testing of Welding Seams in Automotive Applications
      • Aircraft Structural Health Monitoring for Damage Detection: Reliability Aspects and Potential Solutions
      • A Method for Estimating Yarn Orientation in Ceramic Matrix Composite Parts using 3D X-ray CT Image
      • A Model-Based Study of the Effect of Semi-Elliptical Surface Notch Geometry on the Signal of a Split-D Eddy Current Probe
      • Analyses of the Generating Mechanisms of Standard Magnetic Flux Leakage Testing Signals
      • Analysis Techniques for Volumetric Computed Tomography Inspection of Turbine Airfoils
      • An Innovative Application of Computed Tomography: The Next Dimension of Safety for Critical Infrastructure
      • Anisotropic Stiffness Tensor Measurement for Standing Trees using Acoustics
      • Application of Automatic Non-contact Electrical Conductivity Scanning Technique in Characterization of Rolled Aluminum Plates used in Aerospace Applications
      • Application of Ultrasonic Methods for Early Detection of Intergranular Corrosion in Austenitic Stainless Steel
      • Approaching a Videoscope’s Highest Physics Limited Resolution to Improve RVI
      • A Re-assessment of Ultrasonic (UT) Indication Ratings and Amplitude Based Acceptance Criteria for Welded Steel Joints in Structures
      • Assessing Structural Integrity of Old Bridge Foundations Using Swept Frequency Seismic Imaging vs. Direct Structural Investigation – A Case Study
      • Assessing the Ability of Ground-Penetrating Radar to Detect Fungal Decay in Douglas-Fir Beams
      • Assessing the Reliability of Impact-Echo for the Detection of Delamination Using Wilcoxon-Mann-Whitney Statistics
      • Assessment of Acoustic Nonlinearity Parameters Using an Optimized Data-Fitting Method with Multi-Gaussian Beam Model-Based Diffraction Correct
      • Assessment of Centerline Porosity and Residual Stress in Rolled Aluminum Plates Destined for Aerospace Applications using Ultrasonic Test Techniques
      • A Unique and Patented FAST UT Phased Array Instrument
      • A Unique and Patented Phased Array, the FAAST-PA
      • Bearings Fault Diagnosis Using Vibrational Signal Analysis by EMD Method
      • Blended Learning Approach: The Future is Here Now
      • Bridge Cable Fracture Detection with Acoustic Emission Tests
      • Bridge Deck Scanning by Infrared Thermography
      • Broadband Omni-directional Magnetostrictive Transducer (MsT) for Transversal Guided Waves in Plates
      • Case Studies for Nondestructive Evaluation and Mission Success
      • Comparative Seismic Laboratory and Non-Contact Field Measurements of Asphalt Concrete
      • Comparison of Bridge Deck Analysis Techniques Using Manual and Automated Methods
      • Comprehensive Nondestructive Evaluation of Las Vegas Viaduct Deck for Rehabilitation Design
      • Computed Tomography by Combining Transmission and Scatter Radiography Methods
      • Computed Tomography Helical Scanning for Dimensional Metrology: Evaluation of Measurement Errors
      • Conductivity and Thickness Layer Measurements of Conductive Layers on Conductive Base Materials Using Calibrated Apparent Conductivity Measurements
      • Correlation-Based Detection and Classification of Rail Wheel Defects Using Air-Coupled Ultrasonic Acoustic Emissions
      • Cracked Wheel Characterization Using Automated Crack Wheel Detector System (ACWDS)
      • Damage Analysis of 3D Braided Composite Material using Embedded Carbon Nanotube Thread Sensors
      • Damage Detection in Steel Pipes Using a Semi-Supervised Statistical Learning Algorithm
      • Damage Evaluation of Alkali-Silica Reaction Using Acoustic Emission
      • Design of an Orthotropic Piezoelectric Composite Material Phased Array Transducer for Damage Detection in a Concrete Structure
      • Detection and Identification of Dents in Pipelines using Guided Waves
      • Detection of Aluminum Sensitization and Mechanical Strain with Second Harmonic Generation Spectroscopy
      • Detection of Damaged Tool in Injection Molding Processwith Acoustic Emission
      • Detection of Water Ponding in Steel-plate-bonded Concrete Slab Using Ultrasonic Guided Wave
      • Development and Application Stress Measurement Techniques in RF
      • Development of an Ultrasonic Inspection Technique for Sizing of Cracks in Complex Geometry Plant Components
      • Development of a Portable Total-Stress Measurement Instrument
      • Development of Web Based Training for NDE of Bridges
      • Digital Radiography in Industry: Digital Detector Arrays in Radiographic Testing
      • Discontinuity Characterization in Standard Nodular Iron using Nondestructive Techniques
      • Dynamic Radiography Acquisition Software System for Computed Tomography Applications
      • Eddy Current Probability of Detection for Mid-Bore and Corner Cracks in Bolt Holes of Service Material
      • Effect of Focal Law Parameters on Probability of Detection in Phased Array Ultrasonic Testing Using a Simulation and Case Study Approach
      • Effects of Carbon Fiber Misalignment on Composite Strength
      • Effects of Material Variation on Acoustic Emissions-Based, Large-Crack Growth Model
      • Enhanced Tire Quality Controls by Novel X-ray Digital Detectors
      • Evaluation of Hydrogen Cracking using Phased Array Ultrasonic Testing on Washington Avenue Bridge in Minneapolis, MN
      • Explanation of ASME UT in Lieu of Radiography Fracture Mechanics SME Section VIII Div.2 Alternative Acceptance Criteria/Code Case 2235-10
      • Extracting Inspection Process Information from Ultrasonic Chart Recordings of Round Bar and Tubing
      • Faster, Safer, Smarter: Automatic Crack Detection Methods on Large-Scale Concrete Infrastructure
      • Feasibility Study on Adapting a Machine Learning Based Multi-Sensor Data Fusion Approach for Honeycomb Detection in Concrete
      • Field Service Microwave Inspection Experience in Dielectric Components
      • Finite Element Method Characterization of 3D Magnetic Flux Leakage Signal of Crack Discontinuities at Multiple Liftoff Values
      • Finite Element Simulation of a New Ultrasonic Fiber Optic Sensor using Gold Nanocomposite
      • Fluorescent Penetrant Inspection – Some Do’s and Don’ts
      • Fractal Analysis Applied to Laser Spot Thermography
      • Free Vibration Analysis of Sandwich Cylinder Considering Thin Damping Core Layer
      • From SLOFEC to MEC – An Overview of the Technique’s Further Development and Inspection Application for Tanks, Pipes and Pressure Vessels
      • FTIR Reflectance Spectroscopy as a Tool for Mapping the Surface Concentration of Coatings on Metal and Glass Surfaces
      • Game Development Engines as an Ideal Platform for Exploring 3D Virtual Reality Based Visualizations Constructed from Computed Tomography Data
      • Getting More Precision in Videoscope Measurements, While Taking Larger Measurements from Further Away
      • Hand-Held, Wireless (or Ethernet) Eddy Current Array System for Rapid Inspection
      • High-energy Computed Tomographic Inspection of Munitions
      • How the Advancement of Computed Tomography (CT) is Changing the Way We Analyze Munitions
      • Hybrid NDI Technology for Rapid Inspection of Large Aircraft
      • Hydrophilic Emulsifier Concentration
      • Identification of Crack Flaw in Beams
      • Imaging Enhancement for Deep Concrete Blocks by Wave-packet Decomposition and Amplitude Compensation
      • Improving on the 6 dB Drop Technique for Determination of Flaw Length
      • Industrial X-ray Volumetric Computed Tomography
      • Inference of Thermo-Oxidative Aging of a Bismaleimide/Glass Fiber Composite Through Dielectric and Infrared Spectroscopy
      • Influence of Coupling Interference on Arrayed Eddy Current Displacement Measurement
      • Innovative Corrosion Monitoring of Steel Embedded In Concrete
      • In-Situ Structural Health Monitoring of a Reinforced Concrete Frame Embedded with Cement-Based Piezoelectric Smart Composites
      • Inspection of Complex Geometries Using Flexible Ultrasonic Phased Array Probes
      • Inspection of Fabric Reinforced Rubber Expansion Joints using a Microwave Technique
      • Inspection of HDPE Pipe Thermal Butt-fusions using Microwaves
      • Inspection Techniques for Tubulars Used in Oilfield
      • Interior Ballistic Studies via High Frame-rate X-ray Imaging
      • Investigating the Effects of Subsequent Weld Passes on Surface Residual Stresses in Steel Weldments by Magnetic Barkhausen Noise Technique
      • Is Time of Flight Diffraction Blind for Inner Diameter and Outer Diameter Surfaces?
      • Is TOFD Blind for ID and OD Surfaces?
      • It’s a Battle Out There, Corrosion in Oil & Gas Production Offshore
      • Laser-Induced Breakdown Spectroscopy (LIBS) – Automated 2D Chemical Analysis of Concrete
      • Leave-in-Place High Temperature Ultrasonic Transducers
      • Localized Condition Monitoring Around Rebars Using Focused Ultrasonic Field and SAFT
      • Low Speed vs. Highway Speed Infrared Thermography for Bridge Deck Delamination Detection
      • Metrology in Electromagnetic Nondestructive Testing: Correct Evaluation of Test Parameters
      • Microstructural Evaluation of High-strength Bainitic Steel by Nondestructive Techniques
      • Modular Strip Detector Development Testing for Digital Radiography
      • Multilayer Frequency Selective Surface-based Sensing for Structural Health Monitoring of Layered Structures
      • NDE Engineering: E is for Evaluation
      • NDT Goes to Career Day
      • Non-Contact Strain-Sensing Smart Skin
      • Non-Contact Ultrasonic Inspection for Attenuating Materials
      • Nondestructive Evaluation of Multiple Asphalt Concrete Layers of an Instrumented Pavement Section
      • Nondestructive Evaluation of Steel Sheetpile Walls using the Sonic Echo Method
      • Nondestructive Evaluation Utilizing Imaging Plates For Field Radiography Applications
      • Nondestructive Potentiostatic Etching Technique for the Detection and Quantification of Preexisting Plastic Strain in Austenitic Stainless Steel
      • Nondestructive Testing by Full-field Strains from Mechanoluminescent Sensors
      • Nondestructive Testing of Dielectric Materials using an Active Reflecting Microwave Array
      • Nondestructive Testing of Thermal Barrier Coated Turbine Blades using Microwave Techniques
      • Nondestructive Testing Simulation for Studying Structural Integrity in Aerospace Components
      • Nonlinear Ultrasonic Nondestructive Evaluation of Damaged Concrete Based on Embedded Piezoelectric Sensors
      • Numerical Simulation and Experimental Investigation of Propagation of Guided Waves on Pipe with Discontinuities in Different Axial Angles
      • Onsite Metallography Supporting Pressure Vessel Inspection and Reliability
      • Optimal Spatial Filtering Schemes and Compact Tomography Setups
      • Optimal Utilization of Conventional and Phased Array Inspection Techniques in Ultrasonic Testing of Complex Components of Gas Turbines and Aircraft Engines
      • Overview of an Automated Ultrasonic Wheel Defect Detection Technology
      • Phased Array NDE for Railroads
      • Physical Sizing of Discontinuities in Helium Leak Tests: An Approach to Compare Leakage Rates and Leak Diameters
      • Planning Concrete Bridge Deck Repairs Using Rapid Vertical Electrical Impedance and Acoustic Impact-Echo Scanning
      • Post-impact Non-destructive Evaluation of Homogeneous Sugarcane Bagasse Particleboards
      • Practical Issues Related to the Application of Electromechanical Impedance-Based Method in Concrete Structural Health Monitoring
      • Process-Integrated Eddy Current Quality Assurance (Theoretical Simulations, Study, Investigation)
      • Progress Towards the Development of a Compact Calibration Set for Quantitative NDE Inspection of Aerospace Composites
      • Qualification and Stability of a Computed Tomography System for Small Parts Inspection
      • Quantifying Bridge Deck Corrosion Using Ground Penetrating Radar
      • Quantitative Signal Analysis of Concrete Pavements Using Ultrasonic Linear Array Technology
      • Quick Industrial X-ray Testing Without Intermediate Data Carriers of Information
      • Radiation Dose to an Internal Component
      • Radiation Hardness Performance of Amorphous Silicon Flat Panels
      • Rapid Bridge Deck Damage Identification from Unmanned Aerial System Imagery
      • Recent Advances in Handheld X-Ray Fluorescence Based Alloy PMI/Material Testing
      • Recent NDE Developments in Tank Car Inspection
      • Reliability Analysis of Infrared Thermography (IRT) for the Detection of Subsurface Delamination
      • Remote Visual Testing: NDT Initial Inspection of Turbines and Boilers
      • Roads and Bridges 2016: Ultrasonic Examination and Monitoring of Original Sheave Trunnions for the Lift-Span of the I-5 Interstate Bridge Crossing the Columbia River
      • Robot-Based Solutions for NDT Inspections: Integration of Laser Ultrasonics and Air Coupled Ultrasounds for Aeronautical Components
      • Scattering The Problem: A Solution for Scatter Correction in Industrial Cone Beam Computed Tomography
      • Selection of Calibration Reflectors for Corrosion Resistant Alloy Piping
      • SHM for Triggering NDE-Actual Versus Expected Service
      • Similarities and Differences in Condition Assessment of Concrete Bridge Decks by Visual Inspection and NDE
      • Stress Measurement Apparatus Based on Pulsed Magnetic Field
      • Structural Health Monitoring and Design Verification of Tidal Turbine Support Structure
      • Structural Health Monitoring of Weathering Steel Overhead Sign Support Structures in West Virginia
      • Study on the Laser-Based Weld Surface Flaw Identification System Employing Wavelet Analysis Methodology
      • Testing 3D Printed Parts during the Preproduction Stages using Industrial Computed Tomography
      • The Criticality of Being Critical
      • The Fallacy of Sharpness in Determining Digital Radiographic Image Quality
      • The Missing Subject Matter Expert in the Planning and Design Process
      • Theoretical Analysis and Numerical Simulation of the Feasibility of Inspecting Nonferromagnetic Conductors by an MFL Testing Apparatus
      • The Role of Integration in NDT Quality Assurance (QA) Chain
      • The Use of Complementary NDE Techniques and Load Testing to Evaluate a Historic Concrete Arch Bridge
      • Towards Aircraft Condition-based Maintenance: SHM for Damage Detection as In-situ NDI
      • True Advancements for Longitudinal Seam Weld Inspection in Phased Array
      • True Advancements for Longitudinal Weld Pipe Inspection in PA
      • Ultrasonic and EMAT - Important Tools to Analyze a Combined Effect of Multiple Damage Mechanisms in Boiler Tubes
      • Ultrasonic Beam Models for Angle Beam Surface Wave Transducers
      • Ultrasonic Sensor System for Wall Thickness Monitoring
      • Ultrasonic Testing of Bolts and Pins: Longitudinal Beam Review
      • Ultrasonic Wave Attenuation as a Parameter for Concrete Strength Prediction
      • Use of Ground Penetrating Radar (GPR) for Value Engineering Rehabilitation Redesign of New York State Thruway Bridge Decks
      • Use of Heavy Weight Deflectometer in Monitoring Flexible Pavement Deterioration during Accelerated Pavement Testing
      • Use of NDE to Detect MSE Wall Reinforcement in Highway Bridge Embankments
      • Use of NDE to Evaluate Transverse Cracking Near Reinforced Concrete Pavement Joints
      • Use of Simulators for Radiation Safety Training
      • UT Inspection of Welds in Accordance with Code AWS D1.1: Part 2. Effect of Surface Conditions
      • UT of Composites: Atypical Characteristics that You Need to Be Aware of
      • Vibration-based Nondestructive Testing to Determine Viability of Parts Produced with Recycled Thermoplastic Composites
      • Volumetric Inspection of Wind Turbine Blades using a Microwave Interferometric Technique
      • Weld Penetration Monitoring Using PAUT for Orthotropic Deck
      • X-ray Assisted Defect Recognition (ADR) Project Summary for MIM Parts
      • X-ray Computed Tomography for Dimensional Measurements
      • XRF Advancements Improve Detection of Trace Silicon in Carbon Steel in On-line, High Temperature Process Piping and Components
    • 2015
      • Acoustic Emission Inspection and Engineering Assessment of Fitness-for-Continued Service of Cryogenic Storage Tanks
      • A Diversified NDT Career Versus a Specialized NDT Career
      • Advanced Fatigue Crack Detection Using Nonlinear Self-Sensing Impedance Technique for Automated NDE of Metallic Structures
      • Advanced UT Personnel Development Solutions
      • Advancements in Imaging Corrosion Under Insulation for Piping and Vessels
      • Advances in Linear Detector Arrays for X-Ray DR and CT Imaging
      • A Field Deployable Digital X-Ray Solution for Weld Inspection in Oil & Gas
      • Air-Coupled Ultrasound Methods for Detection and Characterization of Out-of-Plane Fiber Waviness
      • A kHz Rate Non-contact Compact Laser-ultrasound Scanner for Advanced Evaluation of Aircraft Composites
      • Analysis Techniques for Volumetric Computed Tomography Inspection of Turbine Airfoils
      • An Approach for the 3D Characterization of Internal Defects of Objects by Pulsed Infrared Thermography
      • An Experimental-numerical Investigation of the Face-to-face Sensor Characterization Technique
      • An Introduction to the European Community Pressure Equipment Directive (PED 97/23/EC)
      • Application of Alternating Current Field Measurement for Determination of Surface Cracks and Welds in Steel Structures at Lift-off
      • Application of Flexible PAUT Probes for Small Diameter Flow Assisted Corrosion Elbow Inspection
      • Approach for Improving the Sensitivity of Barkhausen Noise Sensors with Applications to Magnetic Nondestructive Testing
      • Approach for Testing Dynamic Zero Drift of a Mechanical Gyroscope
      • Basic Human Factors and Nondestructive Testing
      • Bonding Piezoelectric Wafers for Application in Structural Health Monitoring Adhesive Selection
      • Bond Interface Evaluation of Solid Woven Carbon Fiber Composite onto Aluminum Alloys
      • Bond Strength Evaluation of Composite Joints Using DIC
      • Challenges and Solutions PAUT Online Training
      • Challenges to Nondestructive Testing Reliability
      • Comparative Nondestructive Evaluation of Horizontal Stabilator Composite Structures
      • Comparison Between Contact and Immersion Ultrasonic Techniques to Evaluate Longitudinal Residual Stress in Friction Stir Welding of Aluminum Plates
      • Comparison Corrosion Mapping Solutions using Phased Array and Conventional UT Techniques
      • Composite Material Characterization using Acoustic Wave Speed Measurements
      • Computerized Tomography Application in Oil Industry Using KT-2 Signature
      • Condition Monitoring of Pipeline by Radiometry Technique
      • Conversion from Radiographic Film to Photo-Stimulable Phosphor Plates for Neutron Computed Radiography of Irradiated Nuclear Fuel
      • Corrosion Imaging and Thickness Determination Using Micro-Curie Radiation Sources Based on Gamma-Ray Backscattering: Experiments and MCNP Simulation
      • Crack Assessment with Inline Inspection and Nondestructive Evaluation Technologies
      • Determining the Dynamic Modulus of a Viscoelastic Asphalt Mixture Using an Impact Resonance Test With Damping Effect
      • Devices for the Movable Local Multidirectional Magnetization of Metal Structures in Magnetic Particle Testing
      • Does Structural Health Monitoring Provide Safety and Maintenance or Confusing Data?
      • Eddy Current Roughness Dynamic Measurement through Lubricant
      • Effectiveness of Rejuvenators on Aged Asphalt Concrete using Ultrasonic Non-collinear Subsurface Wave Mixing
      • Effect of Cooling Rates on the 3D Porosity of Permanent Mold Castings Measured by Computed Tomography
      • Electric Field Leakage Nondestructive Testing Principle and its Simulation
      • Electric Potential and Electric Field Imaging with Applications
      • Electromagnetic Measurement of Applied and Residual Surface Strain in Steel
      • EMAT for Rapid Screening of Waste Storage Tanks
      • Engineering a Reliable NDT Procedure
      • Estimation of the Two-Dimensional Homogenous Dielectric Scatterer in a Slab Medium Using Particle Swarm Optimization and Asynchronous Particle Swarm Optimization
      • Evaluation of the Microstructural Changes of a Heat Treated 2.25%Cr-1%Mo Steel using EMAT and Ultrasonic Testing
      • Evaluation of Welding Residual Stress in a Nickel Alloy Pressure Vessel using the Ultrasonic Stress Measurement Technique
      • Exploring the Existence of Null Spaces in Mediated-Reality Supplemented Methods to X-ray Attenuation Estimation
      • Fast High Resolution Algorithms for Nondestructive Evaluation Computed Tomography
      • Fine Scale Metrology on Cylindrical Structures using X-ray Micro-computed Tomography
      • Free Space Microwave Nondestructive Characterization of Composite Materials
      • Fuel Cell Power System for Portable NDI Equipment
      • Gamma Ray Dose and Operating Methodology
      • Geometric Measurement of Pipes Using Ultrasound
      • Grain Size Measurement of Copper Spot Welding Caps Via Ultrasonic Attenuation and Scattering Experiments
      • Ground Penetrating Radar Imaging of Concrete at a Nuclear Power Plant
      • Guided Wave Electromagnetic Acoustic Transducer Technique for Inspection of Clad Plates
      • Guided Wave Structural Health Monitoring Technique for Large Diameter Storage Tank Floors
      • Guided Waves, Waveguides and Mode Converted Signals
      • Guided Wave Testing (GWT) of High Temperature Piping
      • Hanford Double-Shell Tank System Orientation
      • Hanford Double-Shell Tank Visual Inspections
      • Hanford Review of Double-Shell Tank Construction
      • Helium Mass Spectrometer Leak Detection: A Method to Quantify Total Measurement Uncertainty
      • Historical Development of the Specification that Qualifies Penetrants
      • Home NDT Home: Application of Leak Testing to Residential Structures
      • Identifying Different Types of Defects in Butt-Welded Steel Plates using Acoustic Emission Technique
      • Imaging Plate Use for Radiographic Nondestructive Evaluation
      • Implementation of Computerized Radiography in the Work Place
      • Improvements in Flux Leakage Assessment of Tubulars and Other Goods
      • Improving Surface Mine Profitability with Phased Array Ultrasonics
      • Inline Microwave Characterization System for Multi-layer Composites
      • Innovative Ultrasonic Wind Rotor Blade Inspection
      • In Search of Resin Rich Inclusions using Ultrasonic Testing
      • Inspection of Hanford’s Double-Shell Waste Tanks Using Electromagnetic Acoustic Transducers
      • Inspection Qualification of Ultrasonics for Inservice Examination of Ferritic Piping Welds
      • Inspection Techniques for Tubulars Used in Oilfield
      • Integrated NDT Approach to Evaluate the Condition of an Existing Jointed Plain Concrete Pavement and Derive a Durable and Cost-Effective Rehabilitation Strategy
      • Introducing Young People to NDT
      • Investigation of Abnormal TOFD Signals from Coarse Grain in Alloy 690 Tube Materials
      • Investigation of Dynamic Properties of a Novel Capacitive-based Sensing Skin for Nondestructive Testing
      • Liquid-Metal-Jet X-Ray Tube Technology and Tomography Applications
      • Longitudinal and Shear Velocity Measurements in a Woven Fiber Reinforced Laminated Composite
      • Magnetic Particle Equipment Accuracy and Repeatability
      • Measurement of Nonlinear Surface Acoustic Waves for Damage Characterization in Concrete
      • Measurement of the Modulation Transfer Function for a Backscatter Radiography System Used in Nondestructive Examination
      • Measuring Nozzle Erosion in a Rocket Motor Using Ultrasound
      • Microstructural Characterization of a Welded Joint Using EMAT and Immersion UT Techniques
      • Mobile High-energy X-ray Radiography for Nondestructive Testing of Cargo Containers
      • Multi-point Laser Heating Source for Thermography Application in Composite Testing
      • NDE of Adhesively Bonded CFRP-Aluminum Lap Joints Using Acoustography
      • NDT Awareness Campaign
      • NDT Technician Career Development
      • Near-Field Array Technology: The Latest Advancements for Air Cooler Inspections
      • Next Generation Eddy Current Array Technology: “The Need for Speed”
      • Noncontact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
      • Noncontact Surface Discontinuity Detection for Metal Material using a Displacement Current Sensor
      • Nondestructive Characterization of Fiber Orientation in Long Fiber Thermoplastic Composites Using Vibration-Based Method
      • Nondestructive Testing of Wind Turbine Blades using Air-coupled Ultrasonics
      • Nondestructive Testing Software Developed at NASA Glenn Research Center
      • Nonlinear Guided Wave Spectroscopy for Early Damage Detection
      • Digital Detercor Array for Offshore Pipeline Radiographic Testing
      • On the Processing of Leaky Guided Ultrasonic Waves for the Noncontact Inspection of Underwater Structures
      • Optimizing Energy Level in Industrial Radiography
      • Outlier Analysis and Artificial Neural Network for the Noncontact Nondestructive Evaluation of Immersed Plates
      • Out of this World Inspection: On-orbit Inspection of the Space Shuttle’s Thermal Protection System
      • Overview of the Neutron Radiography and Computed Tomography at the Oak Ridge National Laboratory and Applications
      • Pattern Recognition Algorithms for Automated Defect Classification of Ultrasonic Signals
      • Performance Evaluation of Automated Ultrasonic Inspection Equipment for the Tube and Pipe Industry
      • Performing Neutron Imaging of Mock Uranium Fuel Rods with a Robotic Manipulator
      • Phased Array Transducers for Ultrasonic Guided Wave Mode Control and Identification for Aircraft Structural Health Monitoring
      • Phased Array Ultrasonic Testing of Longitudinally Submerged Arc-welded Pipes in the Pipe Mill
      • Pipeline Monitoring with Vibroacoustic Sensing
      • Profile Likelihood: What To Do When Maximum Probability of Detection Never Gets To One
      • Prognosis of Residual Stresses in Steel T-Beams Using Acoustic Emission Method
      • Progress in Nondestructive 3D Characterization and Modelling of Aerospace Composites
      • Quantile Probability of Detection: Distinguishing Between Uncertainty and Variability in Nondestructive Testing
      • Quantitative Defect Characterization for Passive Thermography Application
      • Recent Advancements in EMI Technology Ensuring Used Tubing Integrity When Reused in the Same Well after Work Over
      • Developments in Probability of Detection Modeling and the Use of Simulation Studies
      • Reducing Welding Inefficiencies using Laser Scanning Technology
      • Remnant Thickness Mapping Using High Order Shear Horizontal Modes
      • Replacing Film in a Modern Industry
      • Review of Past Inspection Capabilities and Definition of Inspection Needs
      • Robotic Based Inspection Systems; Petrobot and Other Initiatives
      • Self-calibrating Terahertz Technique for Measuring Coating Thickness
      • Short-Range Guided Wave Testing for Corrosion Under Pipe Supports
      • Some Thoughts on Being an Expert Witness in Cases Involving Tubular NDE
      • Strain Gage Identification of the Correction Procedure for Quantitative Thermoelastic Stress Analysis under Non-adiabatic Conditions
      • Structural Damage Detection using Ambient Vibrations
      • Structural Integrity of Fiber Reinforced Plastic Piping
      • Study of the Discontinuity Parameters due to Cold Work for 3005 Aluminum Alloy using Positron Lifetime Spectroscopy
      • Study on Metal Magnetic Memory Testing Mechanism
      • Surface and Subsurface Crack Analysis in Carbon Steel Samples using Magnetic Particle Testing and Liquid Penetrant Testing
      • Synthetic Minority Oversampling and Linear Crossvalidated Support Vector Machine-based Recursive Feature Elimination to Classify Weld Flaws in Radiographic Images
      • Testing of Rewritten Eddy Current Inspection Software
      • The Effect of Experiment Variables on Industrial X-ray Micro-computed Tomography Sensitivity
      • The Journey of Nondestructive Testing
      • Thermal Neutron Imaging Using a High Flux Deuterium Ion Linear Accelerator
      • The Use of Full Matrix Capture and Software Beam Forming for Reduced Inspection Times
      • Tsallis Distribution-Based Fractional Derivative Method for Lamb Wave Signal Recovery
      • Tubular Outside Diameter Measuring Laser Apparatus in Conjunction with Ultrasonic Wall Thickness
      • Ultrasonic Defect Mapping Using Signal Correlation for Nondestructive Evaluation (NDE)
      • Ultrasonic Detection of Flaws in Metallic Components using Conventional UT and Phased Array UT Techniques
      • Ultrasonic Phased Array Technique in Rail for Crack-like Discontinuity Detection
      • Ultrasonic Porosity Measurement in Carbon Fiber Epoxy Laminates
      • Ultrasonic Sensor System for Wall-Thickness Monitoring
      • Ultrasonic Testing Calibration using Reference Blocks
      • Ultrasonic Testing Inspection of Welds in Accordance with Code AWS D1.1: Part I
      • Ultrasonic Testing of Electroslag Welds
      • Ultrasound Material Characterization of Complex Matrix Material and Mitigation of Noise using Signal Processing Techniques
      • Unpowered Wireless Transmission of Ultrasound Signals from Multiple Sensor Nodes
      • Using Electrochemical Fatigue Sensor Systems to Identify Active Fatigue Crack Growth
      • Using Nondestructive Test for In-situ Strength Evaluation of Concrete Masonry Units
      • Utilizing Computed Tomography for RDT&E of the Advanced Fragmentation Grenade
      • Visualization of Fatigue Cracks at Structural Members Using a Pulsed Laser Scanning System
      • What is Missing in Nondestructive Testing Capability Evaluation?
      • Who is the Conference of Radiation Control Program Directors (CRCPD)?
    • 2014
      • 2D Finite Element Modeling of Ultrasonic Time of Flight Diffraction Technique
      • 50 Years of Materials Evaluation: 2014 Readership Survey
      • A Corrosion Monitoring System for Post-Tensioned Structures by Guided Ultrasonic Waves
      • Acoustic Emission for Damage Evaluation in Realistic CFRP Components
      • Advances in Neutron Imaging with Grating Interferometry
      • Advances in Neutron Radiology for Nondestructive Testing
      • Aging Aircraft NDT
      • A kHz Rate Non-contact Compact Laser-ultrasound Scanner for Advanced Evaluation of Aircraft Composites
      • Analysis of the Delamination Detection Capabilities of Pulse Stimulated Thermographic Nondestructive Testing Techniques
      • Analytical Verification for Vibration Analysis Technique used in Determination of Cracking in Cantilever Beams
      • An Evaluation of Imaging Plate Characteristics that Determine Image Quality in Computed Radiography
      • A New Magnetic Configuration for a Fast Electromagnetic Acoustic Transducer Applied to Online Steel Pipe Wall Thickness Measurements
      • A New Method of Scour Inspection, Monitoring and Warning: FRA Case Study
      • A New Paradigm for Nondestructive Testing
      • A Nondestructive Evaluation Technique for Detecting, Locating and Quantifying Damage in Large Polymer Composite Structures Made of Electrically Non-Conductive Fibers and Carbon Nanotube Networks
      • Application of Advanced Non-Contact Ultrasound for Composite Material Qualification
      • Application of Flash Thermography in Automotive Carbon Fiber Composites
      • Application of Stochastic Subspace Identification in Bridge Health Monitoring, and Study on Effects of Temperature Fluctuations on Frequency Changes
      • Applying Dynamic Acoustoelasticity (D.A.E.) Principle for In Situ Monitoring of Civil Engineering Structures.
      • ASNT Website Guide
      • Automated Defect Classification Using Artificial Neural Networks
      • Automated Object Recognition using Multiple X-ray Views
      • Automatic Conductivity Scanning of Rolled Aluminum Plates for Aerospace Applications
      • AWS Application of Phased Array Ultrasonics
      • AWS D1.1 and D1.5 Phased Array Examination
      • Bridge Inspection NDE Seminar Training Course
      • Challenges Faced by State Transportation Agencies: Backgrounds and Solutions
      • Challenges to Successful Implementation of Structural Health Monitoring
      • Characteristics of Acoustic Emission and Positional Entropy of Q345R Steel in Tensile Loading at Room Temperature
      • Characterization of the Critically Refracted Longitudinal (LCR) Waves and Their Use in Defect Detection
      • Clarity, Accuracy and Punctuality in NDT Reports: the CAP System
      • Collecting Bridge Deck Condition Data using Optical and Thermal Cameras from a Single Vehicle Platform at Near Highway Speeds
      • Comparison of Dynamic Young's Modulus of Thin Concrete Disks to Stress Wave-Based Nondestructive Evaluation Findings
      • Comparison of Ground-Coupled and Air-Launched Ground Penetrating Radar Methods for Bridge Deck Condition Evaluation
      • Comprehensive Model of Ultrasonic Scattering from Cubic Polycrystalline Media Consisting of Anisotropic Texture and Grain Elongation
      • Computed Tomography and 3D Rendering of Composite Materials
      • Condition Assessment Based on Visual Inspection and Nondestructive Evaluation of Highway Bridges in Turkey
      • Condition Assessment of Concrete Piers with Tomographic Imaging
      • Condition Assessment of Reinforced Concrete and FPR Composite Structural Components using NDT Techniques
      • Continuous Wavelet Transform Analysis for the Enhancement of Signal-to-noise Ratio in Coarse Grain Austenitic Stainless Steel
      • Conventional and Phased Array Ultrasonic Testing for Composite Materials
      • Corrosion Monitoring of a Massive Concrete Structure Exposed to Marine Environment Using Embedded Corrosion Sensors
      • Corrosion Monitoring of Steel Rebar by Long-Period Fiber Grating Sensors Coated With a Thin Fe-C Layer
      • Damage Detection of a Full-Size Concrete Box Girder Bridge with the Moving-Window Least-Square Fitting Method
      • Demagnetizing Technique for Main Pipelines
      • Detecting Corrosion Under Insulation using Trained Dogs: a Novel Approach
      • Determination of Grouting Defects in “Deep” PT Ducts Using Gamma Rays
      • Developing and Administering NDT Practical Level II Examinations
      • Development and Implementation of a Level II Computed Tomography Operator Training and Certification Program
      • Development of an Integrated Structural Health Monitoring System for Pairing Fatigue Damage Estimations with FHWA Condition Ratings
      • Dielectrometry Sensors for Nondestructive Testing of Glass-fiber Polymer-matrix Composites
      • Digital Image Correlation Techniques for Aerospace Applications
      • Digital Radiography and Computed Tomography Process Effect on Electronic Device Temperature and Circuit Performance
      • Does Structural Health Monitoring (SHM) Provide Safety and Maintenance or Confusing Data?
      • Dynamic Response Simulation of Steel Bridges under Truck Loading
      • Eddy-Current Coil Interaction With A Perfectly Conducting Wedge of Arbitrary Angle
      • Effect of Varying Inspection Parameters in Crack Depth Measurements Using Potential Drop Method
      • Efficient GWUT Signal Processing Algorithms for Wireless NDE
      • Electromagnetic Inspection and Diagnostics of Steel Ropes: Technology, Effectiveness and Problems, ET
      • Electro-Mechanical Impedance (EMI)-Based Incipient Crack Monitoring and Critical Crack Identification of Beam Structures
      • Embedded Ultrasound Sensors for Monitoring Concrete Structures
      • Evaluation of AISI 316L Stainless Steel Welded Blind to Nozzle in a Pressure Vessel
      • Evaluation of Nondestructive Evaluation Survey Effectiveness based on Sampling Frequency
      • Evaluation of Signal Frequency and Testing Speed on Wireless Eddy Current Inspection
      • Evaluation of the Q-factor as a Metric for Distributed Damage in Concrete
      • Field Evaluation of Bridge Coatings Using Active Thermography
      • Field Verification of Nondestructive Testing Technologies for Condition Assessment of Concrete Bridge Decks: A Case Study
      • Free Vibration Analysis of Sandwich Cylinder Considering Thin Damping Core Layer
      • Full-Field Visualization Techniques for High Density Ultrasound Measurements
      • Fully Contactless Ultrasonic System to Characterized Concrete Structure With Guided Wave Approach and Energy Attenuation
      • Grouting Defects Localized by Ultrasonic Testing Including Phase Evaluation
      • Guided Ultrasonic Wave Imaging for Immersed Plates Based on Wavelet Transform and Probabilistic Analysis
      • High-Frequency Eddy Current System for Analyzing Wet Conductive Coatings during Processing
      • Images of Thermographic Signal Reconstruction Coefficients: A Simple Way for Rapid and Efficient Detection of Discontinuities
      • Imaging Plate Background Lighting Conditions for Acceptable Image Quality
      • Impact Damage Detection in CFRP Laminates with Ultrasonic NDE
      • Impact of 3D Laser Data Resolution and Accuracy on Pipeline Dents Strain Analysis
      • Improved Detectability with Dynamic Gain for Digital Radiography
      • In-Situ Nondestructive Positive Material Identification Testing For Determining Carbon Steel Pipeline Material Properties
      • In-situ Small Angle Neutron Scattering and Ex-situ Electrical Resistivity to Nondestructively Monitor Aging of a Nickel-based Superalloy
      • Integration of GPR and Core Data Laboratory Testing to Identify the Causes of Premature Pavement Failures
      • Introducing Young People to NDT
      • Investigation of Stress and Temperature Effect on the Longitudinal Ultrasonic Waves in Polymers
      • Laboratory Development of a Borehole Ultrasound Nondestructive Testing Method to Evaluate Bridge Foundations
      • Large Scale Implementation of Computed Radiography Digital Archiving Networks for High Volume NDT
      • Laser Induced Breakdown Spectroscopy (LIBS) – Visualization of Ion Transport Processes in Concrete
      • Laser-segmented Scintillators for High Energy Digital Radiography
      • Lessons Learned from Nondestructive Testing of Concrete Structures with Complementary Stress Wave-Based Methods
      • Liberal Arts College Students Apply
      • Load-enhanced Lamb Wave Techniques for Characterization of Scatterers in Structures with Complex Geometries
      • Long-Term Maintenance of the Suspension Cables of the Anthony Wayne Bridge
      • Magnetostrictive Sensing Probes for Guided Wave Testing of High Temperature Pipes
      • Mass Point Leak Rate Technique with Uncertainty Analysis
      • Measuring Discontinuity Depth in Ultrasonic Inspection of Butt Welds
      • Methodologies for Automated Ultrasonic Testing Performance Quantification
      • Microwave Inspection of Fiber Reinforced Plastic Products for Absolute Thickness and Remaining Wall
      • Minimization of Impacts on the User’s Health and the Environment by PT and MT Consumables
      • Modeling of Environmental Effects on Thermal Detection of Subsurface Damage in Concrete
      • Modeling the Density Effect on Elastic Modulus of Cross-linked Silica Aerogels using a Rule-based Fuzzy Logic Model
      • Mollifier Schemes in Limited Data Computerized Tomography
      • Monitoring and Inspecting Precast Piles with Carbon Fiber Reinforced Polymer (CFRP) Prestressing Cables During Cold-weather Casting
      • Multi-Frequency Eddy Current Nondestructive Evaluation of Aerospace Structures
      • Multi NDE Technology Condition Assessment of Concrete Bridge Decks by RABITTM Platform
      • Multispectral Aerial Imaging for Infrastructure Evaluation
      • NDE of Aged CFRP Panels Using Infrared Thermography
      • NDE of Stay Cable Anchorage Zones
      • NDT vs. NBI: Implications for Deck Maintenance and Rehabilitation
      • Near-Field Acoustic Emission Sensing Performance of Piezoelectric Film Strain Sensor
      • Neutron Radiography Developments Within the Dept. of the Army
      • New NDT Applications Utilizing High Energy X-ray Computed Tomography - Digital Linear Detector Arrays as Technology Enablers
      • Noncontact Sensor Technology for Propulsion Health Monitoring
      • Nondestructive Assessment of FRP-Concrete Bond
      • Nondestructive Assessment of Residual Stresses and Distortion in Austenitic Stainless Steel Weld Joints
      • Nondestructive Evaluation and Assessment of Concrete Barriers for Defects and Corrosion
      • Nondestructive Evaluation of Plasters on Historical Thin Vaults by Scanning Laser Doppler Vibrometers
      • Nondestructive Evaluation of Welding Residual Stresses in Austenitic Stainless Steel Plates
      • Nondestructive Resonance Testing using Time and Frequency Domain Techniques
      • Nondestructive Testing Exhibit Opens on Mare IslandNondestructive Testing Exhibit Opens on Mare Island
      • Nondestructive Testing of a Rare Crusader Sword
      • Novel Damage Diagnosis Algorithms for Aerospace Nondestructive Testing Data Using Ultrasonic Testing Technique
      • Online Close Loop Control of Ultrasonic Consolidation Using Ultrasonic Nondestructive Testing
      • Optimal Sensor Placement for Condition Assessment of a Cantilever Truss Bridge
      • Performance of NDE Technologies in Condition Assessment of Prestressed Concrete Girders
      • Phased Array Ultrasonic Testing Saves Time, Increases Productivity
      • Porosity and Dimensional 3D Process Control – Fast Computed Tomography in High Pressure Die Casting
      • Porosity Measurement in Carbon Fiber Epoxy Laminates by Using Acoustography
      • Practical Training in NDT
      • Pressure Change Measurement Leak Testing Errors
      • Programmed Instruction Series
      • Pulsed Thermography Signal Processing Techniques Based on the 1D Solution of the Heat Equation Applied to the Inspection of Laminated Composites
      • Qualification Of Digital Radiography Process In Production Line
      • Quantifying NDT Results for Structural Piling
      • Quick Break
      • Range Extension Techniques in Industrial Computed Tomography
      • Reliability of Underwater Acoustic Imaging and Underwater Ultrasonic Testing
      • Residual Stresses in Punches for Backward Extrusion
      • Semi-Active Smart Rocks with Flipping Magnets
      • Sense and Cents from Sensors
      • Shear Wave Measurements Using Normal Incidence Focused Transducers
      • SHM to Support Preventive Maintenance of Transportation Structures
      • Signal Processing Techniques to Improve Laser-ultrasonic Inspection of Composites
      • Simplify the Science & Reduce CNR Check Frequency with a Pixel Value Baseline
      • Simulating the Attenuation of Field Collected GPR Signals of Various Reinforced Concrete Bridge Decks
      • Simulation of Inspection Process for Functionally Graded Materials by Ultrasonic Time of Flight Diffraction Technique
      • Single Side Imaging of Corrosion Under Insulation Using Single Photon Gamma Backscattering
      • Some New Results in Coiled Oilfield Tubing Inspections
      • Structural Damage Detection Using Ambient Vibration
      • Structural Health Monitor of the US Grant Bridge (Data Patterns)
      • Surface Roughness Measurements of Non-Stick Coatings on Metal Plates
      • Tempering Effect and Tensile Properties Evaluation of C45 Steel Based on Magnetic Memory Technology
      • The Acoustic-laser Vibrometry Technique for the Noncontact Detection of Discontinuities in Fiber Reinforced Polymer-retrofitted Concrete
      • The Advantages of Laser Ultrasonics for the Inspection of Complex Composite Parts
      • The C.A.P. System: Clarity, Accuracy, and Punctuality in NDT Reports
      • The Critical Role of High Resolution X-ray Micro-computed Tomography for Ultra-thin Wall Space Component Characterization
      • The Limitations of Magnetic Flux Leakage Scanning of Aboveground Storage Tank Bottoms
      • The Phase Contrast Imagining Using Micro-Focus Systems
      • Thermoelastic Stress Analysis of Fatigue-Prone Details
      • Thermographic Detection and Characterization of Flaws in Composite Materials
      • Thermography: More Than a Pretty Picture
      • Time Reversal-based Beam Focusing of an Ultrasonic Phased Array Transducer on a Target in Anisotropic and Inhomogeneous Welds
      • Tomographic Imaging of Moving Objects
      • Toward Automated Interpretation of Integrated Information: Managing “Big Data” for NDE
      • Towards the Design of Metamaterials with Enhanced Damage Sensitivity: Second Gradient Porous Materials
      • Tracing Defects in Glass Fiber/Polypropylene Composites Using Ultrasonic C-Scan and X-Ray Computed Tomography Methods
      • Ultracloud – A New Ultrasonic Nondestructive Testing Technology
      • Ultra-High Accuracy Laser Measurements on an Adjacent Box Beam Bridge
      • Ultrasonic Evaluation of Bolted Connections in Satellites
      • Ultrasonic Inspection of Welds in Corrosion Resistant Alloy Piping
      • Ultrasonic Nondestructive Testing of Large-scale Composites
      • Ultrasonic Technique Development Using Software Tools
      • Ultrasonic Testing of Composites 101
      • Ultrasonic Testing using Matrix Arrays for Discontinuity Detection
      • Utilization of Virtualized Environments for Efficient X-ray Attenuation Approximation
      • Vibration Response of Foundation on Elastic Half-Space Medium-Experimental Analysis
      • Visual Image Correlation for Bridge Displacement Measurement
    • 2013
      • 2D and 3D Imaging of Concrete and Fiber Reinforced Polymer Composite Wrapped Cylindrical Columns using Ground Penetrating Radar
      • Acceleration of Finite Difference Time Domain Model on a Graphics Processing Unit for Time Reversal Microwave Testing
      • A Comparison of Acoustography with other NDE Methods for F.O. Inclusions Detection in Carbon Epoxy Laminates
      • Acoustic Emission Analysis of Unidirectional Carbon Fiber Composite Plate
      • Acoustic Emission Source Location During In-Situ Load Test
      • Acoustic Emission Technique for Damage Assessment of Gas Pipeline in Hydraulic Test
      • Acoustic Emission Waves from the Onset of Galling between Tool and Sheet Material
      • Advanced Processing Methodologies Improve Neutron Radiograph Image Quality
      • Advanced Ultrasonic Technology for Air Void Distribution in Concrete
      • Advances in Large Diameter Pipe Inspection
      • Advances in NDT Applications using Linear Detector Arrays (LDAs) with examples of applications in Renewable Energy, Mining and Oil & Industries
      • A Graphical Processing Unit-Based Parallel Implementation of Multiplicative Algebraic Reconstruction Technique Algorithm for Limited View Tomography
      • Air-coupled Ultrasonic Testing of Carbon-carbon Composite Aircraft Brake Disks
      • A Magnetostrictive Phased Array System for Guided Wave Testing and Structural Health Monitoring of Pipe
      • Analysis of Acoustic Emission Testing Data using Neural Networks
      • Analysis of Laminated Composites with Portable Ultrasonic Imaging
      • Analyzing the Relevant Features of GPR Scattered Waves in Time- and Frequency-Domain
      • A Novel Ultrasonic Vibration Analysis Technique for Defect Detection
      • A Novel Ultrasonic Vibration Analysis Technique for Discontinuity Detection
      • Application of Digital X-Ray for finding dezincification in brass fittings
      • Application of Time of Flight Diffraction Technique for Imaging Cracks in Rod Specimens
      • Application of Tomographic NDT Techniques in Oil Industry
      • Assessing Probability of Detection Based on Acoustic Emission Associated with Fatigue Crack Extension in Steel Bridge Elements
      • A Universal Strategy for Correcting Ultrasonic Size Estimates, Illustrated using Echo-dynamic Size
      • Automated NDT Machines for CFC Parts of the New Airbus A350XWB
      • A Wireless Sensor Node for Structural Health Monitoring using Guided Wave Testing
      • Case Study of Surface Corrosion Analysis on Pressure Vessels Using a 3D Laser Technique
      • Characterization of UV-A Lamps for MT and PT
      • Comparison of Dynamic Differential Evolution and Self-Adaptive Dynamic Differential Evolution for Buried Metallic Cylinder
      • Composite Material Characterization using Microfocus X-ray Computed Tomography Image-based Finite Element Modeling
      • Computed Radiography System Qualification and Verification for the Acceptance of Customer Product
      • Contrast Information Obtained by Neutron Grating Interferometry Compared to Conventional Neutron Imaging
      • Defect Detection in Concrete Structures Using Homogeneous Length Sorted Single-Walled Carbon Nanotube Sensors
      • Defect Mapping Based on Signal Correlation for Ultrasonic NDE
      • Deformation Analysis of a Brake Caliper Using NDT-Technologies
      • Detection and Characterization of Waviness in Unidirectional GFRP Using Rayleigh Wave Air Coupled Ultrasonic Testing (RAC-UT)
      • Detection of Surface Cracks in Metallic Samples Using Microwave NDE
      • Determination of Structural Flaws in Beams
      • Digital Radiographic Imaging Plate Physical Properties
      • Education Fosters Growth in Nondestructive Testing’s Future
      • Effectiveness of a Simplified Pullout Test Using a Post-Installable Break-Off Bolt
      • Effect of Decay on Ultrasonic Velocity and Attenuation Measurements in Wood
      • Effect of Fatigue Precracking on Crack Engagement during Sonic IR Testing
      • Evaluation of Prestressed Concrete Beams based on Acoustic Emission Parameters
      • Finite Element Modeling of Thermosonic Phenomena and the Effects of Vibration Frequency and Amplitude on the Temperature Increase in Surface Cracks
      • Fluorescent Magnetic Testing in Undarkened Areas: Key Safety and Cost Advantages
      • Guided Wave Propagation and Focusing in Multi-layer Pipe with Viscoelastic Coating and Infinite Soil Media
      • Guided Wave Technique for Corrosion Detection in Reinforced Steel Bars
      • Health Monitoring and Crack Detection System Development for Turbine Engine Rotating Components
      • High Resolution X-ray Computed Tomography for Quantitative Characterization of Fiber Reinforced Polymers and Heterogeneous Light Metals
      • How We Make Decisions for Radiation Safety
      • Hybrid Signal Processing Approach for Enhanced Detection of Defects in EC-NDE
      • Image Fusion Based on Single-frequency Guided Wave Mode Signals for Structural Health Monitoring in Composite Plates
      • Image Quality Parameter Measurements Using a New 0.95 MV X-Band Accelerator and a New High Energy DR Panel
      • Imaging Plate Design and Use for Radiographic Nondestructive Evaluation
      • Impacts to Nondestructive Testing by New Methods in Neutron Imaging Technology
      • Industrial Applications of Scanning Acoustic Microscopy
      • Infrared Vision Inspection of Cultural Heritage Objects from the City of L’Aquila, Italy and its Surroundings
      • Innovative Design of Eddy Current Probes for Turbine Blades Monitoring Through Conductive Coating
      • In-Situ Monitoring of Creep Using Directional Electric Potential Drop Measurements
      • Introducing Visitors to NDT: A Universal Template for Constructing Clear and Concise NDT Method Descriptions
      • Investigation on a Kind of Embedded AE Sensor for Concrete Health Monitoring
      • Joining Dissimilar Metals: A Novel Two-step Process with Ultrasonic Monitoring
      • Magnetic Flux Leakage Testing Method: Strong or Weak Magnetization?
      • Microwave Interferometry Inspection of Dielectric Materials
      • "Model Based Capability Assessment of an Automated Eddy Current Inspection Procedure on Flat Surfaces"
      • Nanoindentation Characterization of Vinylester Glass-fiber Composites Submitted to Dense Ultraviolet Radiation Exposure
      • Nearest Mean Classifier for Defect Classification in CFRP Panels
      • New Indices for Plotting C-scan Images Obtained from Ultrasonic Testing of Adhesive Joints
      • New Methods in Computed Tomography with Regularized Iterative Methods and Statistical Inversion
      • Nondestructive Evaluation of Composite Repairs
      • Nondestructive Evaluation of Corrosion in Varying Environments Using Guided Waves
      • Nondestructive Position Detection of a Metallic Target within Soil Substrate Using Electromagnetic Tomography
      • Nondestructive Testing of Spot Welds using an Ultrasonic Resistance
      • Nugget Shape and Size Classification by Shearography Fringe Pattern in Spot Weld Detection
      • On the Detection of Hot Spots in Operating Photovoltaic Arrays through Thermal Image Analysis and a Simulation Model
      • Optical Density vs. Discrete Code Value Metrics for X-Ray Digitization Workflow Evaluation
      • Optimal Excitation Radiation Source for Fluorescent Nondestructive Testing
      • Penetrant Testing of Welds
      • Phased Arrays for Inspection of Bolts and Shafts
      • Photoelastic Visualization of Ultrasound as a Supporting Tool for Advanced Modeling Software
      • Quantitative Analysis of Uranium Distribution in Plate Fuel Element Using Real Time Digital X-Ray Radiography
      • Quest for Reliable Nondestructive Testing
      • Radiation Hardness Investigations of Integrated Readout Circuits for a Counting X-Ray Line Detector
      • Real-time Ultrasonic Quality Control Monitoring in Resistance Spot Welding: Today and Tomorrow
      • Recognition of Damage Acoustic Emission Signals of Fiberglassreinforced Plastic Based on a Wavelet Neural Network
      • Reference Discontinuities for Small Surface-breaking Cracks
      • Remote Characterization of Defects in FRP Strengthened Concrete Using the Acoustic-Laser Vibrometry Method
      • Robots for Automated Nondestructive Examination of Complex Shapes
      • Second Harmonic Generation of Guided Waves in Circular Cylinders: Analysis of Axisymmetric Torsional and Longitudinal Modes
      • "Simulated Transient Electromagnetic Response for the Inspection of GFRP-Wrapped Concrete Cylinders Using Radar NDE"
      • Source Location of Acoustic Emission Based on First Motion of Waveform
      • Statistical Analysis of Hit/Miss Data
      • Statistical Assessment of Probability of Detection for Automated Eddy Current Nondestructive Evaluation Inspection
      • Steel Bar Inspection of Bridges using Gamma Rays
      • Study of Degradation in Composite Lap Shear Joints using a Guided Wave Technique
      • Sub-inch Aerial Imaging for Bridge Deck Cracking Evaluation
      • Super-Resolution Image Reconstruction for Ultrasonic NDE of Carbon Composites
      • Techniques Developed for Digital Radiography and Computed Tomography Used to Advance and Evaluate the Finished Specimen
      • Tensile Mechanical Properties Prediction of Reinforcing B500C Steel Bars in Coastal Structures
      • The Advantages of Using Eddy Current Technology for Weld Inspection
      • The Application of Polynomial Fitting Techniques to IRT Inspection
      • The Effect of Material Damping on In-Plane Vibration Characteristics of Rotating Disk
      • The Importance of Intellectual Property Management and Protection in a Technical Environment
      • Theoretical Application of Dual Robotic Systems for Radiographic Tomography
      • Thickness Measurement of Fiber and Glass Reinforced Material Systems
      • Ultimate Load Prediction in Fiberglass/Epoxy Beams from Acoustic Emission Data using Neural Network and Statistical Analyses
      • Ultrasonic Evaluation of Adhesive Coverage in Bonded Joints using a 2D Array Technique
      • Ultrasonic Examination for Detection of Cracks in Roof Transport Wheel Axles
      • Ultraviolet-A Lamp Technologies for Nondestructive Testing: The Challenges and a Path Forward
      • Understanding the Basis for Radiation Fears
      • Understanding the Hierarchy of Documents in NDT
      • Using Operating Deflection Shape (ODS) and Experimental Modal Analysis (EMA) Modeling and Simulation Techniques to Predict the Effects of Pumping System Upgrades
      • Vibroacoustic Monitoring of Gas-Filled Pipelines
      • Wireless Eddy Current System Prototype for Nondestructive Testing
      • Wireless NDI for Aircraft Inspection
    • 2012
      • 3D Ultrasonic Testing Solution for Aircraft Composite Fan Blades
      • A Comprehensive Structural Analysis Process for Failure Assessment in Aircraft Lap Joint Mimics Using Intramodal Fusion of Eddy Current Data
      • Acoustic Emission During Tensile Deformation of Smooth and Notched Specimens of Near Alpha Titanium Alloy
      • Acoustic Emission for Nondestructive Evaluation of Active Crack Dynamics in Concrete Wall of a Highway Bridge Due to Interaction with Freight Traffi c on Railroad that the Bridge Crosses
      • Acoustic Emission Studies for Anchor Point-to-Anchor Point Assessment of Varina-Enon Bridge Stay Cable
      • Acoustic Imaging to Enhance Bridge Inspection and Bridge Repair Design
      • Acoustic Monitoring of the Main Cables of the Anthony Wayne Suspension Bridge
      • A Hybrid Analytical Model for Radiography Cone Beam Effects
      • An Assessment Tool for Coiled Tubing
      • Anchoring Screws Health Detecting and Measures to Prevent Fracture
      • An Evaluation of Surface Defect Detection in Reinforced Concrete Bridge Decks Using Terrestrial LiDAR
      • A New Approach for Technology Transfer of SHM and NDT Technologies to the Bridge Industry
      • A New Magnetic Sensor Concept for Nondestructive Evaluation of Deteriorated PreStressing Strand
      • An Image Enhancement Technique for Ultrasonic NDE of CFRP Panels
      • An Integrated Monitor and Warning System for the Jeremiah Morrow Bridge
      • A Novel Method for the Remote Detection of Debonding in FRP-Strengthened Concrete: Acoustic-Laser Vibrometry
      • Application of Dynamic Stiffness Method in Evaluating Status of Existing Bridge Pile Foundation
      • Applications of MsT Probes for Guided Wave Testing of Components
      • A Review of Digital Radiography in the Service of Aerospace
      • A Rotationally Invariant Capacitive Probe for Materials Evaluation
      • Artificial Neural Networks Methods to Analysis of Ultrasonic Testing in Concrete
      • A Technique and Device for Health Monitoring of Glass Armor
      • Automated Phased Array inspections of CFRP composites primary Aerospace structures.
      • Automated Practical System Qualification, Validation and Reporting acc. ASTM E2737-10
      • Equivalent Penetrameter Sensitivity as Applied to Computed Radiography
      • Bad Pixel Management for Industrial Inspection
      • Best Energy Selection for Different Applications with Digital Detector Arrays from 20 to 600 keV
      • Beyond the Single Predictor Variable POD Model
      • Blackbeard’s Flagship Still Causing Trouble 300 Years Later: Using X-ray Imaging to Examine a Shipwreck
      • Bridge Deck Scanning for Condition Assessment and Delamination Detection
      • Bridge Retrofit Laser Measurement System
      • Bridge Safety Testing
      • Case Depth Measurement of Steel Hardened by Carburization Using a Combination of Electromagnetic Methods
      • Characterization of Linear Arrays for Composite Inspection
      • Characterizing Damage Development in Cross-ply Laminates Using Simulated Acoustic Emission
      • Circumferential Scanning in Ultrasonic Inspection
      • Comparative Study of Multiple NDT Technologies from the Surveys on a Reinforced Concrete Bridge Deck and Prefabricated Slab
      • Comparison of Conventional and Direct Flat Panel Digital Radiography for 1 inch (25mm) Thick Stainless Steel Butt Welds
      • Comparison of Visual, Eddy Current, Ultrasonic and Magnetic Particle Testing Techniques for Boiler Tube Inspections
      • Condition Assessment of GFRP Composite Wrapped Timber Railroad Ties and Timber Bridge Piles Using Infrared Thermography
      • Condition Assessment of High Rise Reinforced Concrete Bridge Piers
      • Current Bridge Management System at NYSDOT
      • Cyber-Enabled Decision Making System for Bridge Management Using Wireless Monitoring Systems: Telegraph Road Bridge Demonstration Project
      • Damage Assessment of Reinforced Concrete Shear Walls by Acoustic Emission
      • Damage Localization for CFRP-Debonding Defects Using Piezoelectric SHM Techniques
      • Defining the Deterioration Process Through Ground Penetrating Radar
      • Delamination Detection in Octagonal Prestressed Concrete Piles Using Impact Echo
      • Detecting Compression Wood in Green Loblolly Pine with Radio Frequency
      • Detection of Discontinuities in Carbon-carbon Composites using X-ray Compton Backscatter Radiography: Radiography by Selective Detection
      • Detection of Multiple Cracks in Concrete Beams Using Artificial Neural Networks and Computational Mechanics
      • Development and Applications of a 3D Optical Bridge Deck Evaluation System
      • Development and Transfer of Magnetostrictive Sensor (MsS) Technology for Inspection of Pipelines and Other Structural Components
      • Development of Pig Iron and Molten Slag Level Meter for Blast Furnace
      • DICONDE and Digital Image and Information Management on CD/DVD
      • Direct Visualization of Acoustic Waves Propagating within a Single Anisotropic Crystalline Plate with Hybrid Acoustic Imaging System
      • Discontinuity Rating using Distance Gain Size Technique for Phased Array Ultrasonic Testing
      • Dynamic Response of Precast Bridge System
      • Echograph Ultrasonic Testing of Helical Submerged Arc-welded Pipes
      • Effect of Ambient Background Temperature on LRU Data in Structural Health Monitoring for Bridges
      • Effect of Corrosion on the Integrity of Adhesively Bonded Composite Patch Repairs of Damaged Aircraft Structures Using Acoustic Emission Monitoring
      • Effects of Surface Grooving of Concrete Pavements on Stress Wave-Based NDE/NDT Measurements
      • Electromagnetic Through-transmission and its Applications
      • Encoded Phased Array Bridge Pin Inspection
      • Engineering Support for Management and Maintenance
      • Enhancement of an Inveterate Method for Measuring Eyebar Tension
      • Establishing Eddy Current Testing in the Industries
      • Evaluating Fatigue Damage Using Strain Data
      • Experiences with the Assessment of Coiled Tubing
      • Experimental and Analytical Investigations of Acoustic Wave Propagation using a Reservoir and an Acoustic Lens
      • Finite Element Modeling of Trunnion Rods for Reverse Engineering of Tension
      • Finite Element Model Updating of a Long-Span Suspension Bridge Using Measured Vibration Data
      • Fitness-for-Service Assessment and Root Cause Analysis of Cracked Suspension Bridge Roadway Girders
      • Fluorescent Nondestructive Testing Sensitivity Improvement through Choice of Safety Glasses
      • Focusing a Flexible Ultrasonic Array Transducer Using a Time Reversal Technique for Discontinuities within Complex Geometries
      • Getting the Most from Lube Oil Analysis: Basics of Common Oil Analysis Tests and Their Significance
      • Global Structural Assessment of Highway Bridges Through Rapid Modal Analysis
      • Guided Wave Bondline Inspection of a Thick Viscoelastic Layer on an Elastic Half-Space
      • Heat Residual Stress Measurement of Welded Areas in Steel Pipes via Magnetic Particle Testing
      • High Frame Rate X-Ray Detectors for Cineradiography and NDT
      • High-Temperature Phased Array Inspection
      • How Sensitive is a Bubble Test — Really?
      • Humber Bridge Performance Sensitivity to Bearing Behaviour
      • Image Quality in Digital Industrial Radiography
      • Implementation of Thermal Infrared Imagery for Highway Concrete Bridge Decks
      • Improving Efficiency of Microwave Wideband Imaging using Compressed Sensing Techniques
      • Improving Proficiencies of NDT Personnel
      • Impulse Excitation Modulus Measurements of Hardmetal Rods using Custom Software on a Standard Personal Computer and Microphone
      • Incorporating a Performance-based Testing Approach to Qualify Nuclear Nondestructive Testing and Quality Control Personnel
      • Infrared Thermography and GPR Techniques for Condition Assessment of RC Bridges
      • Infrared Thermography Applied to Wood
      • Inspection of Euripus Cable-Stayed Bridge
      • Intelligent Nondestructive Testing Expert System for Aircraft Carbon/Carbon Composite Brakes Using Infrared Thermography and Air-coupled Ultrasound
      • Investigation of Backscatter X-Ray Imaging Techniques for Uranium Dioxide Fuel Rods
      • It Takes More than a Statistician to do Probability of Detection
      • Joint Estimation of NDE Inspection Capability and Flaw-Size Distribution for In-Service Aircraft Inspections
      • Laser and Acoustic Excitation Safety
      • Laser Bond Inspection of Composite Material
      • Laser-Induced Breakdown Spectroscopy for Fast Analysis of Ingress Profiles of Ions on Concrete
      • Limitations of Structural Identification: Case Studies
      • Low-Cost Threshold Sensors for Corrosion Detection in Bridge Decks
      • Main Cable Corrosion Monitoring for Suspension Bridges Using a Nondestructive Sensing System
      • Material Hazards in Penetrant Testing
      • Maximizing Inspection Cycles Utilizing Steel’s own Material Properties to Arrest Cracks as an Effective Adjunct to NDE
      • Measurement of Localized Deformations in High-Strength Steel Cables
      • Measurement System Analysis
      • Measuring Microfocal Spots using Digital Radiography
      • Millimeter Wave Doppler Sensor for Nondestructive Evaluation of Materials
      • Model-Based Ultrasound Tomography for Monitoring Grouting Defects in Reinforced Concrete Structures: Reconstruction Algorithm and Simulations
      • MsS Guided Wave Probe and Coupling Approach for Reliable Long-Term Structural Health Monitoring (SHM) of Pipeline
      • NDT for Mechanical Characterization of Masonry in Italian Archeological Architectures
      • NDT From the Sustainment Engineering Perspective: Decision Without Disassembly
      • Network Level Bridge Deck Condition Assessment in Minnesota
      • Neural Network Burst Pressure Prediction in Composite Overwrapped Pressure Vessels Using Mathematically Modeled Acoustic Emission Failure Mechanism Data
      • Neural Network Classification and Evaluation of Weld Discontinuities Based on Manual Ultrasonic Testing Technology
      • New Developments in Fast and Recordable Surface Inspection Using Electromagnetic Acoustic Transducer (EMAT) Techniques
      • Noncontact Bridge Deformation Monitoring Using Laser Tracking Technology – Technology Evaluation and Field Implementation
      • Nondestructive Evaluation of Bridge Cables and Strands Using the Magnetic Main Flux Method (MMFM)
      • Nondestructive Testing Detects Altered Baseball Bats
      • Nondestructive Testing of Bridge Stay Cables
      • Nondestructive Testing of Geomembranes
      • Nondestructive Testing Training and Certification Requirements
      • On the Use of Highly Nonlinear Solitary Waves for Structural Materials Technology
      • Performance of NDT Technologies in Concrete Bridge Deck Deterioration Detection and Characterization
      • Phased Array UT or Conventional UT: A Reference Analysis Based on Industrial Installations for Welded Tubes
      • Pipeline Sediment Testing Strategy
      • Post-Tensioned Tendon Inspection and Structural Health Monitoring
      • Probabilistic Method and its Application for Evaluating Carbonation Life of New-Built Concrete Structures
      • Qualification of a Computed Radiography System’s Exposure Range for Optimum Image Quality
      • Quantitative Fractography for Improved POD Analysis of Bolt Hole Eddy Current
      • Quantitative Inspection of Wire Rope Discontinuities using Magnetic Flux Leakage Imaging
      • Rapid Bridge Assessment Method for Highway Bridges
      • Reinforced Concrete Beams Analyzed with Rayleigh Fibre Optic Strain Sensing
      • Remote Dynamic and Static Monitoring of Highway Bridge Deflection
      • Remote Nondestructive Testing of Composite-steel Interface by Acoustic Laser Vibrometry
      • Remote Sensing and Analysis of Acoustic Emission Signatures from Active Cracks in Stressed Concrete Structures
      • Residual Stress Mapping in TiN Coatings by Nanoindentation Technique
      • Restoration of the Spread Function in Nondestructive Testing: Theory and Experiments
      • Revelations at Low Kilovoltage
      • Robots in Automated NDT Inspections
      • Rolling Element Bearing Analysis
      • Rounding
      • Specifics of Automated Ultrasonic Inspection of Tubular Products
      • Standoff Through-wall, Sensing at Ka-band
      • State of the Art MT and UT Test Stations in the German Automotive Industry
      • Step-Wise Cracking Cause and Detection
      • Suspension Cable Wire Break Monitoring Using Acoustic Emission for Economic and Probability of Detection Advantages
      • Teaching NDT Procedures at the University Level
      • Technique for Bonding FeCo Magnetostrictive Sensors to Components at Temperatures of Approximately 588 K
      • Tension Assessment of Bridge P-T Bars Using Taut Cable Vibration Measurement (TCVM) Method
      • The Effects of Adhesive Geometry and Type on Strain Transfer for Optical Fiber Strain Sensing
      • The Influence of Stress on Electro-mechanical Impedance Measurements in Rail Steel
      • The Potential of Coherent Radar to Support the Monitoring of the Health State of Buildings
      • Thermal Imaging for Inspection of Large Cryogenic Tanks
      • Thermographic Bridge Coating Inspection System
      • The Use of Magnetic Flux Leakage Testing Method and Apparatus for Steel Pipe
      • Time and Frequency Domain Feature Fusion for Defect Classification Based on Pulsed Eddy Current NDT
      • Time Reversal Focusing of Ultrasonic Array Transducers on a Side-drilled Hole
      • Tracking FPI System Performance Using Soft Metrology
      • Two-Stage Automated Defect Recognition Algorithm for the Analysis of Infrared Images
      • Ultrasonic 3D Reconstruction of CFRP Panel Delaminations
      • Ultrasonic Characterization of High Manganese Austenitic Steel Parts for Longevity and Service Life
      • Ultrasonic Condition Monitoring
      • Ultrasonic Guided Wave Inspection of an Interface Between an Anisotropic Layer and an Elastic Half-Space
      • Ultrasonic Phased Array
      • Ultrasonic Stress Measurement for Evaluating the Adequacy of Gusset Plates
      • Ultrasonic Testing of Discontinuities in Closed-Rib Bridge Decks
      • Ultrasonic Testing Signal Enhancement by Piece-wise Deconvolution
      • Ultrasonic Wall Thickness Measuring of Oil Country Tubular Goods
      • Ultrasound Camera: A Federal Aviation Administration Study for Rapid Inspection of Composite Materials
      • Understanding the Basis for Radiation Fears
      • Understanding the Necessity for Multimodal Inspections of 18 mn-5cr Generator Rotor Retaining Rings
      • Unique Petrochemical Applications and Results Employing Real-Time 2D Ultrasound Camera Imaging
      • Use of Acoustic Emission to Evaluate Residual Strength in FRP Pipes After Impact Damage
      • Use of Digital Radiography for Final Part Acceptance of Aerospace Castings
      • Use of Highly Nonlinear Solitary Waves in Nondestructive Testing
      • Use of NDE Methods for Load Rating of Older Structures
      • Using Operating Deflection Shape (ODS) and Experimental Modal Analysis (EMA) Modeling and Simulation Techniques to Predict the Effects of Pumping System Upgrades
      • U.S. Nuclear Regulatory Commission’s Safety Culture Policy Statement
      • Utilization of Remote Sensing Data for Bridge Condition in Operational Decision Support
      • Validation of the Simulation of Pipeline Girth Welds PA UT Inspections
      • Wall Thickness Measurement
      • Weld Testing by Image Plate Based Computed Radiography
      • Wireless Sensor Network Deployments for Structural Identification in a Tied Arch Bridge
      • Wireless Sensors for Structural Health Monitoring
      • X-ray Beam Quality Evaluation of a Linear Accelerator
    • 2011
      • Advanced Phased Array Measurement and Imaging Techniques
      • Advanced Phased-Array Measurement and Imaging Techniques
      • Analysis of the Excitation Spectra of Annular and Comb Arrays for Ultrasonic Guided Wave Applications
      • An Approach for Estimation of the Strength of Insulators at Elevated Temperatures
      • Angle of View
      • Assessment of Properties of Sheet Metals Using Digital Image Correlation
      • Automated Data Analysis System for Steam Generator Tube Inspection
      • Automated Detection of Welding Discontinuities without Segmentation
      • A Wiener Filter-based Synthetic Aperture Radar Algorithm for Microwave Imaging of Targets in Layered Media
      • Benefits of the Multiple-echo Contact Technique for Ultrasonic Thickness Testing
      • Choosing the Right High-speed Nondestructive Testing Technique by Discontinuity Type
      • Climate Change and the Testing of Complex Moisture Regimes in Building Stone: Preliminary Observations on Possible Strategies
      • Conventional, Online and Hybrid Nondestructive Testing Education
      • Correction for Use of Ultrasonic Calibration Standards of Attenuation and Impedance Different than the Test Material
      • Correlation between Active Corrosion and Acoustic Emission Signals Detection
      • Demagnetization
      • Developing and Modifying a Technique in Film Radiography
      • Developing Raman Spectroscopy for the Nondestructive Testing of Carbon Fiber Composites
      • Development of an Ultrasonic Phased Array for Nondestructive Testing of Pipes: Theory and Practice
      • Digital Radiography for High-energy NDT Applications
      • Evaluating the Stability of a Metric for Determining the Health of Armor Plates
      • Forensic Investigation of Out-of-plane Vibrations in the Webs of Plate Girders
      • Heat Residual Stress Measurement of Welded Areas in Steel Pipes via Magnetic Method
      • Importance of Nondestructive Testing for Pavement Analysis
      • Infrared Thermography: A Versatile Nondestructive Testing Technique
      • Infrared Thermography for Moisture Detection: A Laboratory Study and In-situ Test
      • Inline Flow Line Hub Inspection Using Phased Arrays
      • Innovative Techniques for Sub-surface Investigations
      • Intelligent Nondestructive Testing Expert System for Carbon-carbon Composites Using Infrared Thermography
      • Introduction to Guided Wave Testing
      • It Takes More than a Statistician to Do POD
      • Laser Shearography of Aerospace Composites
      • Limits and Advantages of Different Techniques for Testing Moisture Content in Masonry
      • Linear Array NADCAP Certification for Composites
      • Magnetostrictive Sensor Technology for Long-Range Guided Wave Inspection and Monitoring of Pipe
      • Maximizing Nondestructive Testing Training Effectiveness
      • Methods of Bonding MsS FeCo Sensors to Components for Guided Wave Application at Temperatures of Approximately 315 °C (600 °F)
      • Microscopic Morphology, Failure Behavior and NDT of Impact Damage in Solid Composite Laminates
      • Moisture Measurement in Masonry using Gravimetric Techniques
      • Monitoring the Growth of Hidden Corrosion Discontinuities in a Pipeline with Complex Geometry Using Torsional Mode Ultrasonic Guided Wave
      • NDE for Adhesive Bond Strength
      • NDT of Welded Steel Tanks
      • New Procedures and Materials for Improving Protection of Archaeological Areas
      • New Tools for the Protection of Cultural Heritage in Italy: Innovative Techniques for In-situ Diagnostics
      • Online Monitoring of Composite Joining Process
      • Phased Arrays for Chemical and Petroleum Industry Thin-walled Pipes and Tubes
      • Proper Use of Light During Testing
      • Pulse-Echo Phased-Array UT: An Option to Concerns for TOFD Sensitivity
      • Rapid Response to Critical Inspection of the Medical Isotope (NRU) Reactor Vessel
      • Reflectivity Estimation using an Expectation Maximization Algorithm for Ultrasonic Testing of Adhesive Bonds
      • Remote Sensing and Analysis of Acoustic Emission Signatures from Active Cracks in Stressed Concrete Structure
      • Roughness Measurement Parameters by the Eddy Current Technique
      • San Rocco Church: A Typical Ancient Structure in Northern Italy
      • Service to Civilian: Transferring Military NDT Training and Experience to NDT Careers in Private Industry
      • Simulation for Eddy Current Testing of Steam Generators in Nuclear Power Plants
      • Sizing of Inside Diameter Pits in Tubing Utilizing Two-variable Regression Curves
      • Terahertz Computed Tomography of NASA Thermal Protection System Foam Materials
      • The Correlation Between Ultrasonic Testing and Metallurgy
      • Thirty-degree Contact Circumferential Shear Wave Calibration on Outside/Inside Diameter Ratio of Two
      • Time of Flight Diffraction and Phased Array Techniques for the Detection of Small Transversal Cracks in Hydrocracking Unit Welds in CrMoV Steel
      • Training and Testing Issues of Nondestructive Testing Technicians
      • Training for the Pipeline Industry
      • Ultrasonic Characterization of Curling and Warping in Concrete
      • Ultrasonic Nondestructive Optimization for Development of Resin Infusion Process Composite Co-cured Wing
      • Ultrasonic Technique Using Secondary Signals for Blind Thickness Characterization in Multilayer Structural Joints
      • Use of Impact-echo Technique for Detection of Distributed Damage in Concrete due to Alkali-silica Reactivity
      • Validating Design of Experiments for Determining Probability of Detection Capability for Fracture Critical Applications
      • Vibration Analysis Overview as a Predictive Maintenance NDT Tool
      • Visual Testing of Pipe Threads
      • Weld Testing Using Phased Arrays
      • What the Nondestructive Testing Professional Should Know About Vibration Analysis
      • Wireless Ultrasonic Thickness Monitoring at Elevated Temperatures
      • X-ray Test Simulations for the Interior Skin-to-flange Weld for the NASA Ares Rocket Segment
      • X-ray Tomographic Inspection of Nuclear Fuel Rods using a Limited Number of Projections
    • 2010
      • 3D Laser Scanning of Subway Tunnels
      • Acceleration Time Series Based Model Free Linkage Damage Detection for a Steel-Concrete Composite Girder
      • A Comparison of Flexural Wave and Side Sonic Testing for Determining Foundation Depth
      • Acoustic Emission Data Comparison and Analysis of Steel, Aluminum and Wood Material During Tensile and Bending Test
      • Acoustic Emission Fatigue Crack Monitoring of a Simulated Aircraft Fuselage Structure
      • Acoustic Emission Monitoring of a Florida Steel Girder Bridge During a Load Test
      • Acoustic Emission Monitoring of Florida Mast-Arm Poles Susceptible to Fatigue
      • Acoustic Emission Testing and Noise Issues
      • Active Thermographic Coating Inspection System
      • Advanced BEEM Technique for Damage Inspection and Health Monitoring of Structures
      • Advanced NDT processes for remnant life prediction of aerospace engine components
      • AE Inspection and Monitoring for Highway and Bridge: Case Studies in Japan
      • A Fuzzy Expert System for Defect Characterization of Carbon-Carbon Composite Using Air-Coupled Ultrasound
      • An International Approach to Detailing for Safety, Serviceability and Sustainability in Bridge Design
      • Application and Evaluation of Promising Image-Based Approaches for Condition Assessment of Bridge Structures
      • Application of 3D LIDAR Scan of a Bridge under Static Load Testing
      • Application of a Traffic-Speed Road Scanning System Including a New Type of 3D GPR
      • Application Research on Anti-Cracking Agent for Semi-Rigid Base
      • A Proposal for an Element Division Determination Technique for Finite Element Wave Propagation Analysis
      • Assessing Concrete Damage in Reinforced Concrete
      • A Standard Practice for Digital NDT Data Exchange and Storage
      • A Strength Degradation Monitoring System for Highway Bridges
      • Automated Decision Making Tool for Bridge Managers
      • Automated Detection of Counterfeit Integrated Circuits Using Radiography
      • Automatic Road Surface Assessment and High Speed 3D GPR Technology
      • Bear Mountain Bridge Cable Monitoring Update
      • Beneficial Use of Multiple NDE Technologies in Condition Assessment of Reinforced Concrete Bridge Decks
      • Bevel Incidence Angle Requirements for Encoded Phased Arrays
      • Bridge Hanger Pin Inspection Using Ultrasound
      • Case-Depth Measurement of Induction-Hardened Alloy Steel AISI 4140 by Ultrasonic Technique
      • Case Study: Tracking the Performance of Suspender Ropes at the George Washington Bridge using Nondestructive Testing Technique
      • Characterization of Eddy Current Signal for Mixed Flaws of Dent and PWSCC in Steam Generator Tubes
      • Characterization of the Triboluminescence Performance of ZnS:Mn Under Repeated Mechanical Loading for Smart Optical Damage Sensor System
      • Characterizing Point-Based Transverse Pavement Rut Measurement Errors Using Emerging 3D Continuous Profile-Based Laser Technology
      • Coaxial Vision Monitoring of Laser/GMAW Hybrid Welding Process
      • Comparison of the Use of SQUID and Hall Effect Sensors in Nondestructive Testing
      • Comparison of Vibration Method and Elasto-Magnetic Sensor for Monitoring Cable Force
      • Comprehensive Evaluation of Aging Behavior in M250 Grade Maraging Steel Using Nondestructive Parameters
      • Compression After Impact Load Prediction in Graphite Epoxy Laminates
      • Computed Radiography of Artifacts from the USS Monitor
      • Condition Assessment of a 45-year-old Prestressed Concrete Bridge Using NDT and Verification of the Results
      • Damage Detection of Highway Bridges Using Strain and Wireless Acceleration Measurements
      • Data Fusion Techniques of Multiple Sensors Nondestructive Evaluation of a Concrete Bridge Deck
      • Debonding Detection for Concrete-Filled Steel Tube Using Embedded Piezoelectric Actuators
      • Design and Conception Using Smart Composite Materials
      • Designing Bridges for Inspectability
      • Detection and Characterization of Fatigue Cracks in Steel Bridges
      • Detection of Damage and Loosening of Bolted Connections in Structures Using Changes in Natural Frequencies
      • Detection of Damage and Loosening of Bolted Connections in Structures Using Changes in Natural Frequencies
      • Detection of Defects in Carbon-Carbon Composites Using X-Ray Compton Backscatter Radiography: Lateral Migration Radiography
      • Determining the Embrittlement Temperature of Asphalt Binders Using an Acoustic Emission Approach
      • Development of a Sensor for Nondestructive Inspection of Deteriorated Prestressing Strands in Prestressed Concrete Bridges
      • Development of End Area NDE (Nicknamed FRIENDS) for Seamless Pipe and Tubes
      • Development of Guided Waves for Screening of Heat Exchanger Tubing
      • Development of Method for Detecting Heavily Deformed Microstructure in Duplex Stainless Steels
      • Development of Single-Channel and Phased Array Electromagnetic Acoustic Transducers for Austenitic Weld Testing
      • Developments in Guided Wave Testing of Pipelines for Integrity Assessment
      • Diagnostic Load Testing Alternative to Timely and Costly Bridge Replacements
      • Dose in Microfocus Radiographic Inspections
      • Dynamic Characteristics Research of Steel-Free Deck Bridge Damaged Cases
      • Dynamic Load Test for Slab Type Bridge
      • Educational Convergence in Quality Assurance and Nondestructive Testing
      • Effect of Surface Machine Roughness on Detectability of Sub-Millimeter Reflectors in Polycrystalline Materials Using Ultrasonic Immersion Testing
      • Electronic Speckle Pattern Interferometry: A Powerful On Line Optoelectronic NDE Tool for Aerospace Components
      • Embedded Optical Fiber Sensors for In-situ and Continuous Health Monitoring of Smart Composite Civil Engineering Structure
      • Embedded Optical Fiber Sensors in Civil Engineering Composite Structures
      • Emerging Construction Technology – Nano Structural Steel
      • Evaluation of Long-Term Performance of Soil Stabilization with Falling Weight Deflectometer (FWD) Testing
      • Evaluation of the Route 615 Chickahominay River Bridge using Ground Penetrating Radar and Impact Echo Scanning
      • Experimental and Theoretical Investigations of Electrical Impedance Based Sensing for Microstructure and Property Determination of Concrete in Transportation Infrastructure
      • Experimental Tests of Reinforced Concrete Buildings and ENEA DySCo Virtual Laboratory
      • Fiber Optic Monitoring of the Masonry Arch Approach Spans in the Brooklyn Bridge
      • Field Appraisal of Various Types of Highway and Railway Bridges in Western China
      • Field Experience with Nondestructive Evaluation of Unknown Foundations
      • Finite Element Analysis and Field Instrumentation of a Pennsylvania Turnpike Bridge
      • Finite Element Analysis to Improve IR Thermography Inspection for a Stay Cable Bridge
      • Forensic Investigation of Out of Plane Vibrations in the Webs of Plate Girders
      • Frequency Domain Methods for Analyzing Impact Echo Data for Distributed Damage in Concrete
      • Geosynthetic Enabled with Fiber Optic Sensors for Bridge Foundation Monitoring
      • GMR-Sensor Based Eddy Current for Plate and Tubular Configurations
      • Guided Wave EMAT Technique for Composite Plate Inspection
      • Guided Wave Inspection of Complex Steel Structures for Structural Health Monitoring
      • Health Monitoring of a Rotating Disk Using a Combined Analytical-Experimental Approach
      • Health Monitoring of Prestressing Tendons in Post-Tensioned Concrete Structures
      • High-Frequency Contact Ultrasound for Subsurface Characterization of Microelectronics
      • High Rate Wireless Strain Monitoring of an FRP Bridge Deck Replacement Superstructure
      • High-Speed Magnetic Flux Leakage Technique and Apparatus Based on Orthogonal Magnetization for Steel Pipe
      • High-Speed Nondestructive Testing Methods for Mapping Voids, Debonding, Delaminations, Moisture and Other Defects Behind or Within Tunnel Linings
      • High Temperature Nondestructive Testing of Metal Plates Using Mode Selective Wedges
      • Impact Damage Characterization of Transparent Materials
      • Improving Guided Wave Testing of Pipelines with Mechanical Attachments
      • Indirect Displacements Measurement Using Accelerometers and High-Resolution Signal Modeling
      • Infrared Profiling and Ground Penetrating Radar for QA of Hot-Mix Asphalt Construction
      • InfraredThermographic and Radar Testing of Polymer-Wrapped Composites
      • Infrared Thermography Enhances Process Equipment Reliability
      • In-Line and In-Service Applications of Ultrasonic EMAT Inspection
      • Innovations in Bridge Superstructure Condition Assessment with Sonic and Radar Methods
      • Inspection of Warbird Heritage Foundation F-86 Sabre Jet
      • Integrated Bridge Inspection and Management System for State of Indiana
      • Integrating the Evaluation of Suspension Bridge Parallel-Wire Cable Anchoring Systems with the Proper Rehabilitation Methods
      • Integrity Testing of Post-Tensioned Steel Trunnion Rods
      • Intelligent Nondestructive Evaluation Expert System for Carbon-Carbon Composites Using Infrared Thermography
      • Investigation of the Parameters that Influence the Accuracy of Bond Defect Detection in CFRP Bonded Specimens Using IR Thermography
      • Investigation to Damage Detecting Indices for Health Monitoring of a Steel Truss Bridge and Model Test
      • Laser Shearography of Wind Turbine Blades
      • LiDAR Scan Applications for Bridge Condition Validation Post-Blast Load and Construction
      • Load Test of MD-140 HPS Bridge with Distributed Wire Sensors
      • Manual Ultrasonic Testing Using a Two-transducer Technique
      • Material Properties Characterization for Multi-scale Composites: Glass/Epoxy/Silica Nanoparticles
      • Micro Deformation Testing of Cast AM60B Mg Alloy Based on Scanning Electron Microscope and Digital Image Correlation Method
      • Monitoring Fatigue Damage Progression in Spot Welds with Acoustic Emission Sensors
      • Monitoring of Sag Deformation in Suspension Bridges Using a 3D Laser Scanner
      • Monitoring the Relocation of the Innerbelt Bridge (CUY-90-1524) in Cleveland, Ohio
      • MT/PT Units: Follow the Rules and Stop the Mess
      • Multi-Channel Ultrasound Toolbox: A Flexible Modular Approach for Real-Time
      • Multi-Nuclide Sources for Improved Radiographic Performance
      • NDE of Steel Bridges: Fatigue Crack Detection and Monitoring
      • NDT Education and Training: Today and in the Future
      • NDT/NDE Challenges and Solutions in Tennessee Bridge Inspection
      • NDT of High Power Microwave Radar Tubes
      • Neural Network Prediction of Ultimate Compression After Impact Loads in Graphite-Epoxy Laminates from Ultrasonic C-Scan Images
      • New Compensation Principles for Enhanced Image Quality in Industrial Radiology with Digital Detector Arrays
      • New Diagnostic Technique for the Detection of Electric Motors’ Damaged or Loose Connectors Through the Use of Vibration Analysis (High Frequency Detection, HFD) and Motor Circuit Analysis
      • New Technology (Electromagnetic Inspection Technique – “EMIT”) for Inspection of Twisted Tubes
      • Noise and Interference Reduction in Air-Launched Antennas Used for GPR Evaluation of Roads and Bridges
      • Noncontact Air Coupled Technique of Ultrasonic Testing
      • Nondestructive Inspection of Strand Corrosion in Prestressed Concrete Box Beam Members
      • Nondestructive Testing of Foundations – Methods and Case Histories
      • Nonlinear ultrasonic Guided Waves for Stress Monitoring in Prestressing Tendons for Post-Tensioned Concrete Structures
      • Novel All-Electronic Terahertz/Millimeter Wave Imaging for Fast and Reliable NDT of Composites and Foams
      • objective Functions using Different Residuals for Model updating
      • on-Site SIBIE Measurement of Surface Cracks and Defects in Concrete Structures of Highway
      • Optimization of the Flux Distribution in Magnetic Flux Leakage Testing
      • Orientation Dependence of Dislocation Damping of Ultrasonic Waves in Hexagonal Metals
      • Overcoming Challenges in Identifying and Sizing Defects in Railroad Track
      • Passive Micro-Tremor Sensing for Geostability Analysis
      • Petrochemical Applications and Results Using Real Time C-Scan Ultrasound Camera Technology
      • Phased Array in Lieu of Radiography: Issues and Clarifications
      • Pipe Testing with Ultrasonic Guided Wave Synthetic Focusing Techniques
      • Plan for Structural Health Monitoring of the Indian River Inlet Bridge
      • Portable Digital Radiography Solution for Shipyards
      • Portable X-ray in the Service of Art
      • Pulse and Lock-In Thermographic Inspection of Large and Small Composites
      • Quality Assurance of Concrete Deck Reinforcement Coverusing Pachometer and Ground Penetrating Radar
      • Quality Control for Crack Repair – A new Approach using ultrasonic Imaging
      • Quantitative Damage Assessment Based on Environmental Bridge Response
      • Rapid Performance Monitoring of Highway Infrastructures using Chaos Theory Analysis
      • Recent Advances in Subsea Ultrasonic Inspection Capabilities
      • Remote Expert NDE & Ultrasonic Inspection
      • Remote Sensing Technologies for Detecting Bridge Deterioration and Condition Assessment
      • Resolution Enhancement of Ultrasonic Images
      • Reverse Engineering of a Dental Implant Assembly Utilizing X-Ray Computed Tomography
      • Reverse Time Migration: A Seismic Imaging Technique Applied to ultrasound Data
      • Selection of Ultrasonic Transducer Focal and Water Path Lengths for Immersion Pulse Echo Testing of Cylinders
      • Self-Optimized Neural Network Burst Pressure Prediction in Composite Overwrapped Pressure Vessels
      • Shielding for a High Energy Digital Radiography Bay
      • SHRP 2 R06(B): Evaluating Applications of Field Spectroscopy Devices to Fingerprint Commonly Used Construction Materials
      • SHRP 2 Validation Study of Performance of NDT Technologies in Identification and Characterization of Concrete Bridge Deck Deterioration
      • Simulations of Guided Waves in Complex Structures for Structural Health Monitoring
      • SI-SFAP Applications for Bridge Condition Validation Post-Blast Load and new Construction
      • Sizing Discontinuities by Ultrasonics
      • Soft Computing Approach to Crack Detection and FPGA Implementation
      • Soil Structure Interaction: Parameters’ Identification using Particle Swarm optimization
      • Stress Corrosion Cracking Assessment in Pipeline
      • Stress Wave Methods for Quality control and Quality assurance of Pavement Layers during construction
      • Structural Health Monitoring and Damage Identification of Full-Scale Bridges
      • Structural Health Monitoring and Nondestructive Evaluation of the Merrimack River and Washington Street Bridges
      • Study on Retarding Cracking of Asphalt Pavement by Continuous Construction of Asphalt Pavement and Base
      • Success and Challenges for Ultrasonic Testing in NDT and SHM
      • Techniques for Nondestructive Testing of Concrete Infrastructure at Electric Power Plants
      • Temperature and Heat Flux Measurement Methods Using Ultrasound
      • Testing Techniques for High Volume Production Applications
      • The Development of the 2D-Matrix Array Probe to Inspect Seamless Pipe and Tube
      • The Inspection of Welds for Cracking
      • Thermal Imaging of Damage in Bridge Soffits
      • The Rutgers Simple Bridge Security Checklist: Methodology, Development and Calibration
      • Three-Dimensional Visualization and Quantification of Carbon Carbon Composite Aircraft Disk Brakes Using a Medical X-Ray Computed Tomography Scanner
      • Traditional and Real-Time Remote NDT Instruction
      • Training and Testing Issues of NDT Technicians
      • Ultrasonic Examination of Dissimilar Metal Welds in Nuclear Power Plants
      • Ultrasonic Guided Wave Mode and Frequency Selection for Multilayer Hybrid Laminates
      • Ultrasonic Guided Wave Testing of Concrete Anchor Penetrations
      • Ultrasonic Inspection of Drill Pipe Critical End-Areas
      • Ultrasonic Mapping Software for Aircraft Component
      • Ultrasonic Measurement of Hertzian Contact
      • Ultrasonic Multiple Beam Technique Using Single Phased Array Probe for Detection and Sizing of Stress Corrosion Cracking in Austenitic Welds
      • Ultrasonic NDE of Delamination and Porosity in Carbon Fibre Reinforced Plastics (CFRP) Using Multimodal Probability Beliefs in One- and Two-Dimensional Spaces
      • Ultrasonic Phased Array Testing for an Isogrid Structural Element with Cracks
      • Ultrasonic Polar Scan Imaging of Damaged Fiber Reinforced Composites
      • Ultrasonic Testing Equivalent Transformation Technique of Fiber Reinforced High Strength Concrete
      • Ultrasonic Testing for Hydrogen Induced and Stress Corrosion Cracking in the Oil and Gas Industry
      • Ultrasound Phased Array Applications to Composite Cylindrical Structures
      • Underwater Bridge Inspections Using Scanning Technology
      • Use of Magnetostrictive Sensor Technology for Testing Tank Bottom Floors
      • use of Scanning Sonar for Scour Monitoring
      • Uses and Advances of Computed Tomography for 3D Scanning of Industrial Parts
      • Using Emerging NDT Technologies on Aging Bridge Infrastructure
      • UV-A LEDs Part I
      • Validation of Bridge Girder Deflection Measurement Using LiDAR Scan
      • Wavelet Transform Analysis of Guided Wave Testing on Coated Pipes
      • Wireless Remote Expert NDE System and Method for Fielded Military and Commercial Aircraft
      • X-Ray Backscatter Imaging f or Aerospace Applications
      • X-ray Image Simulation Using a Free Ray Tracing Program
    • 2009
      • 3D Laser Scanning as Applied to Subway Tunnel Inspections Techniques for Gathering, Documenting and Managing Inspection Data
      • 3D Utility Mapping Using Integrated Geophysical Technologies
      • Advancements in Pipeline Girth Weld Inspection
      • Air-Coupled Ultrasonic Nondestructive Evaluation of Carbon/Carbon Composite Aircraft Disk Brakes
      • An Industry-cooperative Program to Develop an Automated Phased Array UT System
      • An Ultrasonic Time of Flight Diffraction Technique for Characterization of Surface-Breaking Inclined Cracks
      • Application of Fourier Theory in Radiographic Image Analysis
      • Applying MIL-HDBK-1823 for POD Demonstration on a Fluorescent Penetrant System
      • Approaches to the NDE Engineering Gap
      • A Standard Practice for Digital NDT Data Exchange and Storage
      • A Study on Fitness-for-Service for Localized Corrosion in Abadan Refinery FCCU Piping
      • Automated Analysis of Eddy Current Rotating Coil and Array Coil Steam Generator Tube Inspection Data
      • Automated Health Monitoring of an Aged and Deteriorated Truss
      • Cataract Surgery, Ultraviolet Vision and Ultraviolet-Blocking Glasses
      • Combined X-ray Dual-Energy Radioscopy and Tomography Analysis for Explosives Detection
      • Comparative Study of NDE for Aircraft Carbon/Carbon Composite Brakes
      • Corroded Bolt Inspection Using Phased Arrays
      • Deployment of the World’s First Fully Automated Body Armor Inspection System
      • Design and Implementation of Smart Bearings to Measure Dead and Live Load Effects in an Aged Long Span Bridge
      • Design and Performance of a Broadband 10 MHz Transducer for Elevated Temperature, Leave-in-Place Applications
      • Design of Experiments for Validating Probability of Detection Capability of NDT Systems and for Qualification of Inspectors
      • Determination of Effective Setups for Ultrasonic Testing Based on Numerical Simulations Using Ray Tracing and the Mass Spring Lattice Model
      • Digital Radiography – The 21st Century X-ray Technology
      • Distance Education: Asynchronous Laboratory Training
      • Educational Opportunities Take Many Forms
      • Effect of Welded Pipe Support Brackets on Torsional Guided Wave Propagation
      • Electric Power Applications of Magnetic Particle Testing
      • EMAT Ultrasonic Guided Wave Inspection of Simple Pipe Supports
      • Enhanced Coating Disbond Detection Capabilities in Pipe Using Circumferential Shear Horizontal Guided Waves
      • Enhanced Defect Detection on Aircraft Structures Automatic Flaw Classification Software (AFCS) On Composite Materials
      • Ensuring Performance Compliance of Radiographic Examination in Project Construction
      • Evaluation of Fluorescent Penetrant Indications Caused by Positive Metal Conditions
      • Evaluation of Micro-Cracking in Fiber Reinforced Concrete Pipe Using Acoustic Emission
      • Experimental Study of Nondestructive Microstructural Characterization of Friction Stir Welded Joints
      • Fabrication and Characterization of Nano-Active Fiber Composites as Acoustic Emission Sensors
      • Field Experience in Detection of SCC and HIC Using Ultrasonic Testing in Oil and Gas Industry
      • Film Replacement by Digital Techniques in Weld Testing
      • Generating Tubes, How do we Inspect Them
      • Ground Penetrating Radar (GPR) in Historic Preservation Applications
      • Guided Wave Testing of an Immersed Gas Pipeline
      • Guided Wave Testing of Buried Pipe
      • Health Monitoring Approach for Adhesively Bonded Joints
      • Heat-Induced Disbonding and Degradation of Adhesive Bonds in Honeycomb Sandwich Structures
      • Implementation of Risk Based Inspection Methodology in Managing Integrity of Abadan Refinery Pressurized Production Facilities
      • Implications for the Application and Evaluation of Alternative Excitation Light Sources
      • Improved Reliability of Sonic Infrared Testing
      • In-line and In-service Applications of Ultrasonic EMAT Inspection
      • In-Situ Shearographic Nondestructive Testing of Aging Concrete Structures
      • Integrated LiDAR Applications in Enhanced Bridge Management
      • International Institute of Welding Commission VC Update
      • Investigation of Eddy Current Sensor Models for Sharp Transitional Areas and Geometries
      • Iowa State University’s Nondestructive Evaluation Distance Learning Program
      • Journeys of Our Ancestors: NDT-XRF Analytical Contributions to the Interpretation of Archaeological Ceramic
      • KT-1 Signature for Circular Cone-Beam Tomography
      • Laser Bond Testing
      • Leveraging Technology for Performance Based Bridge Engineering
      • Load Bearing Capacity of Drilled Shafts with Anomalies
      • Lock-In Thermography: Fast, Easy-to-Use NDT for a Wide Variety of Applications
      • Long-term Spherical Tank Integrity Using Permanent Guided Wave Sensors
      • Magnetostrictive Transducer for Torsional Guided Waves in Pipes and Plates
      • Measuring Microfocal Spots Using Digital Radiography
      • Measuring the Paramagnetic Properties of Nonmagnetic Drill Collars
      • Microwave Inspection of Composite Pipes and Clock Spring Repairs
      • Mining Inspection Data
      • Multi-antenna Platforms for Fast and Economical 3D Ground Penetrating Radar Investigations
      • Multi-Objective Optimal Theoretical Model of Geometrical Parameters of Ultrasonic Phased Arrays Transducer
      • Myths vs. Reality in Computed Radiography Image Quality
      • NDE of FRP Wrapped Composite Members to Detect Subsurface Debonds
      • New Approaches for Testing of Adhesive Joints by Ultrasonic C-scan Imaging Technique
      • New Compensation Principles for Enhanced Image Quality in Industrial Radiology with Digital Detector Arrays
      • Nondestructive Testing Techniques for the Ares I Common Bulkhead Bond Line
      • Optical NDT of Adhesively Bonded Joints
      • Predicting the Mechanical Properties of Concrete at Elevated Temperatures
      • Predictive Model of Key Performance Measures for Computed Radiography
      • Probability of Detection Analysis for Eddy Current Inspection Systems
      • Recent Developments in Handheld X-ray Fluorescence (XRF) Instrumentation
      • Reliability Analysis of Time of Flight Diffraction Characterization of Inclined Cracks
      • Safety Evaluation and Load Capacity Rating of Aged and Deteriorated Concrete Bridges with Missing Plans
      • Standardization and Management of Nondestructive Testing (NDT) Data
      • Structural Health Monitoring of Bridge Cables
      • Suspension Bridge Cables: Pathologies, Inspection, Alternative Materials
      • Taking Advantage of Next Generation Processing Technologies — Multi-Core Processors and FPGAs
      • Tap Test: Evolution of an Old Technique
      • Technical Highlights for NDT Digital Radiography (X-ray) Inspection
      • Technical Highlights of Digital Radiography for NDT
      • Techniques for the Use of 3D Digital Inspection Methods in High Volume Production Applications
      • Testing of Holes in Concrete Using Gamma Radiography
      • The Application of Guided Waves for the Detection of Corrosion under Insulation
      • Thermal Diffusivity Mapping of Carbon/Carbon Composites
      • The Transition from Conventional Radiography to Digital Radiography
      • The Use of Real-time Radiography in the Safe Disposal of Radioactively Contaminated Containers
      • Ultrasonic Beam Focusing and Steering of Array Transducers Based on a Time-Reversal Process
      • Ultrasonic Guided Waves for NDE of Sign Support Structures
      • Ultrasonic Guided Waves in Coated Pipes with soil Influence
      • Ultrasonic Inspection of Nodular Cast Iron Parts Utilized in Fabrication of Power Generation Turbines
      • Ultrasonic Phased Array Testing Simulations of Welded Components at NASA
      • Ultrasonic Techniques for Detection of Weak Adhesion
      • Ultrasonic Testing of Buried High-Level Radioactive Waste Storage Tanks
      • Ultrasonic Testing of Ring Type Joint Flanges for Detection of Chloride Stress Corrosion Induced Cracking
      • Underwater ACFM Inspection Using ROVs
      • Use of Magnetostrictive Sensor Technology for Inspecting Tank Bottom Floors
      • Use of NDT Technologies in US Bridge Inspection Practice
      • Use of Permanent Mounted UT Sensors on Offshore Platforms
      • Using Mutually Oblique Fields in a Magnetic Flux Leakage Tool
    • 2008
      • Acoustic Emission Testing as a Noninvasive Tool for Performance Monitoring of High Power Microwave Radar Traveling Wave Tubes
      • Advanced Magnetostrictive Transducer for Generating and Receiving Torsional Guided Waves in Pipes and Plates
      • Advanced Ultrasonic Technique for Measuring Oxide Scale Thickness on the Inner Surface of a Boiler Tube
      • Advances in the NDT of Dissimilar Metal Welds
      • Advances in Thermographic NDT at General Electric
      • Air Force Nondestructive Testing Procedure Qualification Process
      • A New, Improved Pipeline AUT Girth Weld Inspection System
      • A Nondestructive Approach to the Detection and Sizing of Diffused Carbon in Heater Tubes
      • An Ultrasonic Technique for the Testing of Plates Embedded in Concrete with a Multi-element Probe
      • Application of 3D LIDAR Scan of a Bridge under Static Load Testing
      • Application of Model-based Inversion to Eddy Current NDE of Heat Exchanger Tubing
      • A Round-robin Study of the Variability in Performance of Ultrasonic Phased-array Transducers
      • A Study of Circumferential Guided Wave Propagation in Multilayered Annular Structures
      • Automated Nondestructive Testing System for Hard Body Armor Protective Inserts
      • Characterization of Manufacturing and Maintenance of Aerospace Composite Discontinuities Using Infrared Thermography
      • Course in Eddy Current Nondestructive Tesing to Pilot New Online Graduate Certificate in NDT
      • Crack Detection in Armor Plates Using Ultrasonic Techniques
      • Curved Arrays for Improved Inspection of Small Pipe Welds
      • Demonstration of pulsed X-ray Machine Radiography as an Alternative to Industry Radiography Cameras: Demonstration Pilot Project_NDT
      • Detecting Steel Bars and Discontinuities in Reinforced Concrete Members Using Gamma Rays
      • Detection and Classification of Weld Discontinuities in Radiographic Images (Part III: Unsupervised Learning — Phenomenological Analysis)
      • Development of an Inspection Measurement Lab at California State University, Long Beach
      • Development of Hand-held Thermographic Inspection Technologies
      • Development of Nondestructive Techniques for Characterization of Residual Stresses in Advanced Materials
      • Developments in Discontinuity Sizing Using Automated Ultrasonic Testing — An Experimental Study
      • Digital versus Conventional Radiography for Imaging Fatigue Cracks in Riveted Lap Joints of Hybrid Glass Reinforced Fiber/Metal Laminate
      • Distance Education: Asynchronous Laboratory Training
      • Drill Collar Inspection Techniques Measuring the Paramagnetic Properties of Non-Magnetic Drill Collars
      • Environmental Factors for Detecting Subsurface Defects in Concrete Structures
      • Estimation of Density Variation in Vibrocompacted Boron Carbide Capsules by X-ray Radiography
      • Evaluation of Defects in Carbon/Carbon Composites by Using Thermal Diffusivity Mapping Distribution
      • Everything You Wanted to Know About Calibration, But Were Afraid to Ask
      • Fabrication of Flawed Blocks for Ultrasonic Testing in Lieu of Radiographic Testing
      • Field Solutions of Layered Superconductors: A Magnetic Vector Potential Approach
      • Finite Difference Time Domain Simulation of Ultrasonic Phased Array Sector Scan for Imaging Cracks in Large Pipes, Elbows, and Tee Sections
      • Finite Element Analysis of Ultrasonic Surface Waves for Crack Detection on an Engine Rotor Disk
      • Guided Wave CUI Inspection
      • High Frequency Induction Welded Pipe, Revisited
      • High Voltage Electrical Survey Advancement
      • How an Understanding of COTS can Prevent Another “Deepwater”
      • How Nondestructive Test Methods are Applied to Tubular Products for Today’s Exploration and Production of Oil and Gas
      • IIW Commission VC Update – Handbook for Phased Arrays and Other Topics
      • Impact/Echo and Low Frequency Ultrasonic Testing for Assessment of Damage to Concrete Blocks Exposed to Sodium Fire
      • Improvement of Probe Response Extraction Using Time Domain Gating for Embedded Modulated Scatterer Technique
      • Infrared Possibilities Supporting Piping NDE
      • In-Process Monitoring of Porosity in Aluminum Alloy Weldment by Spectroscopy
      • Integrating NDT with Computational Methods Such as Finite Element
      • Integration of Ground Penetrating Radar and Infrared Thermography for Bridge Deck Condition Testing
      • Interpreting MIL-HDBK-1823 for Application to Probability of Detection Demonstration Tests on a Fluorescent Penetrant Inspection System: Balancing Practical and Statistical Considerations when Designing a Specimen Standard_NDT
      • Invariant Worst-Case Interception of Indications during Nondestructive Testing Scanning
      • Investigating the Effects of Aging on the Raman Scattering of Kevlar Strands
      • Investigation of the Variations in Microstructure and Mechanical Properties of Dual-Matrix Ductile Iron by Magnetic Barkhausen Noise Analysis
      • Is SHM NDE?
      • Long-Range Pipe Imaging with a Guided Wave Focal Scan
      • Long-term Structural Health Monitoring for Bridge Piers
      • Magnetic Hysteresis of Resistance Spot Welded Interstitial Free Steels
      • Material Reliability Study on Buried High Level Radioactive Waste Storage Tank Using Remote Ultrasonic Testing
      • Measurement of Pre-penetrant Etch Rate
      • Micro- and Macroscale Damage Detection Using the Nonlinear Acoustic Vibro-Modulation Technique
      • Model-Based Classification of Thin Layers in Multi-Layered Materials Using Nondestructive Ultrasonic Testing
      • Model Based Inversion Using the Element-Free Galerkin Method
      • Monitoring Capability of Penetrant System Performance Panels
      • Multidimensional Sensing for Impact Load and Damage Evaluation in a Carbon Filament Wound Canister
      • Mutual Impedance of Planar Eddy-Current Driver - Pickup Spiral Coils
      • Near-Field Microwave In-Process Thickness Monitoring of Coatings Undergoing Curing
      • Nondestructive Evaluation of Anisotropy in Composite Materials via Acoustic Birefringence
      • Nondestructive Testing Course for Engineering Technology Students
      • On the Theory of Direct and Inverse Problems in the Elastic Rectangle: Antiplane Case
      • Optimization of EMATs for Steel Wires and Strands, Electromagnetic-acoustic transducers
      • Optimization of Test Parameters for Magneto-Optic Imaging Using Taguchi's Parameter Design and Response-Model Approach
      • Phased Array Ultrasonic Applications in the Aerospace Industry
      • Physical Principles of Ultrasonic Nondestructive Testing
      • Pit Depth on Corroded Piping Derived from CR Density Readings
      • Porosity Characterization of Porcelain Bodies
      • Probability of Detecting a Critical Crack during Automated Ultrasonic Testing of Parts
      • Pulsed Eddy Current Testing of Friction Stir Welds
      • Radiographic Testing of Hydroelectric Turbine Cases
      • Rail Surface Characterization
      • Rapid, Nonlinear “System” Identification for NDT, Using Sensor Response Databases
      • Real-Time Remote Ultrasound Nondestructive Evaluation Laboratory
      • Reflective Fringe Pattern Technique for Surface Evaluation and Nondestructive Testing
      • Remote Field Eddy Current Control Using Rotating Magnetic Field Transducer: Application to Pressure Tubes Examination
      • Review and Comparison of Shearography and Thermography for Nondestructive Testing
      • Selection of Phased Array Parameters for Weld Testing
      • SHM Application of Virtual Sensing, Structural Health Monitoring
      • Simultaneous Noncontact Precision Imaging of Microstructural and Thickness Variation in Dielectric Materials Using Terahertz Energy
      • Structural Health Monitoring of Adhesively Bonded Components in Aerospace Structures: Temperature Effect on Guided Wave Based Macro-Fiber Composite Transduction and Damage Detection
      • Structural Testing of a Nickel Based Superalloy Metal Foam via NDT and Finite Element Analysis
      • Subsurface Water Path Detection in Concrete Structures Using Active Thermography
      • Temperature Effect on Guided Wave Based Macrofiber Composite Transduction
      • The Physics of Fluorescence: Implications for the Application and Evaluation of Alternative Excitation Light Sources
      • Thermal and Hygroscopic Characteristics of Restored Plasters with Different Surface Textures
      • The Role of Model Based Inversion
      • The Synthetic Aperture Focusing Technique: A State of the Art Review
      • The Truth behind Creeping Waves
      • The Use of Multi-Antenna Platforms for Fast and Economical 3-D Ground Penetrating Radar Investigations
      • Time-Frequency Approach for Ground Penetrating Radar Data Analysis to Assess Railroad Ballast Condition
      • Time of Flight Diffraction Testing of Austenitic Stainless Steel Weldments at Elevated Temperatures
      • Tuning of Torsional Mode Guided Wave Technology for Screening of Carbon Steel Heat Exchanger Tubing
      • Ultrasonic Cure Monitor
      • Ultrasonic Inspection of Composites using Acoustography
      • Ultrasonic Inspection of Production Welds in a Pipeline Project Using Phased Array
      • Ultrasonic Phased Arrays for Weld Testing
      • Ultrasonic Testing of Thick Steel Products Using a Synthetic Aperture Focusing Technique with a Line-Focused Probe
      • Ultrasonic Transducer Fields Modeled with a Modular Multi-Gaussian Beam and Application to a Contact Angle Beam Testing
      • Ultrasound Vibrothermography Applications for Nondestructive Discontinuity Detection
      • Use of Eddy Current Technology to Assist in the Evaluation of the Fatigue Damage of Electrical Conductors
      • Use of Magnetostrictive Sensor Technology for Monitoring Defects in Plate
      • Use of MsS Monitoring Technology on High Temperature Piping
      • Using Optically Stimulated Electron Emission as an Inspection Method to Monitor Surface Contamination
      • Verification of Indications
      • Volume Focusing Proves Effective in Inspecting both Thick and Thin Parts
    • 2007
      • “3-D” Testing (Multi-directional) of Aircraft Landing Gear
      • A Breakthrough in Phased Array Target Inspection: Ultra-high Speed Scanning with Volume Focusing
      • A Complete Solution for Weld Inspections – Phased Arrays and Diffraction Sizing
      • Advanced NDT with High Resolution Computed Tomography
      • Air Force Nondestructive Inspection Procedure Qualification Process
      • Application of 450 kV Computed Tomography to Engine Blocks with Steel Liners
      • Application of the ACFM Technique for the Inspection of Storage Tank Floor Welds
      • Applying Time of Flight Diffraction UT Technology to Structural Steel Projects
      • Automated Eddy Current Inspection on Space Shuttle Hardware
      • Automated Steam Turbine Straddle Root Disc Head Inspection
      • Beam Sweeping and Encoded Phased Array Units
      • Bridge Deck Condition Assessment Using GPR:Comparison of 1 GHz and 2 GHz Air-launched Horn Antennas
      • Case Study of Heat Recovery Steam Generator Feed Water Pump’s Nonsynchronous, Flow Induced, Vibratory Frequencies
      • Coating Disbond Detection in Pipe Using Circumferentially Oriented Ultrasonic Guided Waves
      • Coke Drum Weld Inspection
      • Comparison of the Effectiveness between Code Modulation and Frequency Modulation Pulse Compression Technique for Ultrasonic Time-of-Flight Diffraction Method
      • Computed Radiography and Paleontology: The NDT of Dinosaurs
      • Condition Assessment of Boilers –A Revolution over Traditional and Existing Techniques
      • Defect Detection in Carbon-Fiber Composites using Lamb-Wave Tomographic Methods
      • Detachable Active Array Head (DAAH):A Proposed Solution to Help the Proliferation of Phased Array Manual UT
      • Detection and Assessment of Structural Flaws in Concrete Bridges with NDT Methods
      • Eigenvalue-Based Approach for Enhancement of Eddy Current Images of Shallow Defects
      • EM Phased Array for Underground Visualization with Parametric Evaluation
      • Enhancing Repeatability in the Measurement of Potential Drop using an Adjustable Four-Point-Probe Measuring System
      • Feeler Snake Pig: A Simple Way to Detect and Size Internal Corrosion
      • Fundamental Investigation of an Ultrasonic Inspection Method Applicable to High Manganese Steel Rails
      • Human Factors in Nondestructive Testing
      • ID Pit Sizing Utilizing Two Variable Regression Curves
      • Improved Rayleigh Wave Velocity Measurement for Nondestructive Early-Age Concrete Monitoring
      • Innovative Low-cost Laser Ultrasonic Receiver for Industrial Applications
      • Level-Set Method Applied to Magnetic Induction Tomography Using Experimental Data
      • MFC-Based Structural Health Monitoring Using a Miniaturized Impedance Measuring Chip for Corrosion Detection
      • Micro-ACFM Sensors for Surface Crack Sizing
      • Microwave Based Nondestructive Testing Using Modified Eddy Current Systems
      • Misconceptions Within Magnetic Particle Inspection
      • Modeling Anisotropic Grain Noise in Eddy Current NDE
      • Multi-Gaussian Beam Modeling for Multilayered Anisotropic Media, II: Numerical Examples of Slowness Surface and Geometry Effects
      • Multi-Gaussian Beam Modeling for Multilayered Anisotropic Media, I: Modeling Foundations
      • New Directions in Guided Wave Pipe Testing
      • Permanent High Temperature Guided Wave Monitoring of Process Piping
      • Phased-array Applications for Aircraft Maintenance: One Fastener-hole Inspection Case
      • Photographing and Sizing the Fluorescent Indications on PSM-5 Panels
      • Practical Considerations in Empirical Probability of Detection Study Design
      • Principles of Phased Array Ultrasound for Nondestructive Testing
      • Quantitative Detection of Internal Defects in Automotive Tires by an Interferographic Technique
      • Quick Break – A Historical Account of What It Is and Why It Is Needed
      • Radiographic Image Correction Using Digital Filters
      • Ramp Damage CheckerA Pulse Echo Inspection Requiring No Adjustments
      • Reliability in High-volume Manufacturing — An Automotive Perspective
      • Remote Sensing Applications for Pipeline Flow Measurements Using Nano Technology
      • Simplified Method for Complete Characterization of an Ultrasonic NDE Measurement System
      • Solution of Maxwell's Equations for the Simulation and Optimization of the Radar Assessment of Concrete Structures
      • Structural Conservation of Robert Stephenson’s High Level Bridge across the River Tyne
      • Student Intern Programs – A Partial Solution to NDT Personnel Needs
      • Surface Relief D-Fiber Bragg Gratings for Multidimensional and High Temperature Sensing
      • The Challenges of NDT Training in a Rapidly Evolving Technological Environment
      • The Inspection of High Frequency Induction (HFI) Welded Pipe Revisited
      • The Inspection of Steel Coiled Oilfield Tubulars
      • The Relationship Between Elastic Modulus of Lead-free Solders and Temperature
      • The Transition from Conventional RD to Digital RD
      • TiC Lathe Cutting Tile Study by Selective Irradiation
      • Two Innovative Applications of Phased Array Ultrasonics for Boiler Tube Assessment
      • Ultrasonic Analysis of the Degree of Cure and Cohesive Properties of the Adhesive in a Bond Joint
      • Ultrasonic Inspection of Flanges with Phased Array Technology
      • Ultrasonic Inspection of Stator Lamination Core Studs of Large Hydro Generators
      • Ultrasonic Monitoring of Dislocations during Fatigue of Pearlitic Steel
      • Ultrasonic Phased Array Inspection of LP Rotor’s Last Stage Blades and Steeples in Large Steam Turbines
      • Ultrasonic Phased Arrays for Weld Inspection
      • Ultrasonic Thickness Testing for Corrosion
      • Use of Phased Array Ultrasonics for Automated Aerospace Testing Applications
      • Utilization of Artificial Neural Network (ANN) for Signal Recognition in Industrial Application of Acoustic Emission
      • Utilizing Digital Radiography in the Conservation of the USS Monitor
      • Versatile Inspection Robot for Power Plant Condition Assessment
      • Why Guided Wave Ultrasonic for Aerospace Applications?
      • World Class NDE Organizations –A Perspective on the Considerations and Significant Attributes of a “World Class” NDE Organization
      • X-ray Backscatter Imaging for NDE Using Radiography by Selective Detection and Snapshot
    • 2006
      • Acousto-elastic Measurement of the Fatigue Damage in Waspaloy
      • Advanced Processing Techniques for Step-Frequency Continuous-Wave Penetrating Radar: The Case Study of "Palazzo Vecchio" Walls (Firenze, Italy)
      • Application of Nonlinear Ultrasonic Measurement for Quality Assurance of Diffusion Bonds of Gamma Titanium Aluminum Alloy and Steel
      • Checking the Ambient Air, Penetrant and Component Temperature
      • Factors Affecting Magnetic Flux Leakage Inspection of Tailor-Welded Blanks
      • Ground Penetrating Radar Imaging of Concrete at a Nuclear Power Plant
      • Influence of Water Content on Ultrasonic Pulse-Echo Measurements Through High Volume Fly Ash Cement Paste - Physicomechanical Characterization
      • Infrared Detector Resolution: How Important Is It for Accurate Thermal Measurement?
      • Kirchhoff Approximation Revisited - Some New Results for Scattering in Isotropic and Anisotropic Elastic Solids
      • Modeling the Effects of Pit Corner Geometry on Magnetic Flux Leakage Signals
      • Modeling the Response of Ultrasonic Reference Reflectors
      • Near-Field Measurements of Dielectric Properties of Granular Materials with Microstrip Antennas for Microwave-Sensing Applications
      • Nondestructive Testing of Ceramic Materials
      • Preventing Magnetic Particle Tank Freezing When Using Water Particle Baths
      • Reconstruction of Elliptic Voids in the Elastic Wedge: The Antiplane Problem
      • Review of Advanced Acoustical Imaging Techniques for Nondestructive Evaluation of Art Objects
      • Robust Design of a Natural Gas Transmission Pipeline Inspection Tool using the Taguchi Method
      • Tensile Strength Prediction in Concrete Using Nondestructive Testing Techniques
      • Theory of Four-Point Direct-Current Potential Drop Measurements on a Metal Plate
      • Using Eddy Current Testing to Solve Industrial Problems
      • What You Really Need to Know to Begin Using Infrared Cameras
    • 2005
      • Active Corrosion Detection Using Acoustic Emission
      • Active Infrared Thermography for NDT of Concrete Structures Strengthened with Fiber Reinforced Polymer
      • An Assessment of Remote Visual Testing System Capabilities for the Detection of Service Induced Cracking
      • An Experimental Analysis of Microcracking in Brick Masonry Using the Power Density Spectrum of Ultrasonic Signals
      • Angle Beam Shear Wave Nondestructive Testing
      • A Point Source Correlation Technique for Automatic Discontinuity Identification and Sizing Using Time of Flight Diffraction
      • Application of Acoustoelasticity to Evaluate Stress Relaxation in API 5L x70 Steel for Pipelines
      • Application of Ultrasonic Guided Waves for Aging Wire Insulation Assessment
      • A Torsional Mode Guided Wave Probe for Long Range, In Bore Testing of Heat Exchanger Tubing
      • Automated Testing of Aluminum Castings Using Classifier Fusion Strategies
      • Construction Weld Testing Procedures Using Ultrasonic Phased Arrays
      • Detection of Asphalt Binder Aging in Flexible Pavement by Ground Penetrating Radar
      • Developing, Optimizing and Validating Automated Ultrasonic Procedures for Testing Heavy Walled Hydroprocessing Reactors
      • Digital Radiography: The Basics
      • Digitized Frequency Modulated Thermal Wave Imaging for Nondestructive Testing
      • Dynamic Characterization of Slab on Steel Stringer Bridges
      • Effects of Grain Size and Surface Roughness on Ultrasonic Testing of Aluminum Alloy Die Castings
      • Explaining Differing Magnetic Particle Testing Results in the Same Specimens
      • Holographic and Shearographic NDT Applications in Aerospace Manufacturing
      • Impact Echo Scanning for Discontinuity Detection and Imaging in Posttensioned Concrete Bridges and Other Structures
      • Ledger Shines Light on Society’s Early Years
      • Magnetic Design of a Flux Leakage Assembly for Pipes
      • Magnetic Particle Testing of High Tensile Parts Used in Aerospace Applications
      • Materials Health Management by In Situ Chemical Analysis
      • Microwave and Millimeter Wave Nondestructive Testing of the Space Shuttle External Tank Insulating Foam
      • NDT and Instrumentation of Civil Engineering Structures: From Research to Education
      • Nondestructive Testing for Corrosion under Paint
      • Nondestructive Testing of the Space Shuttle External Tank Foam Insulation Using Near Field and Focused Millimeter Wave Techniques
      • Online Infrared Detection of Inclusions and Lack of Penetration during Welding
      • Portable Phased Array Applications
      • Practical Issues in Electrical Measurements on Nanoscale Materials, Structures and Devices
      • Probes for Remote Field Testing of Heat Exchangers: Configurations and Capabilities
      • Process Compensated Resonant Testing in Manufacturing Process Control
      • Progress with Coiled Line Pipe
      • Quantitative Comparison of Thermographic Data Sequences
      • Sparse Array Ultrasonic Guided Wave Tomography
      • Testing of Circumferential Discontinuities Using Remote Magnetic Field Analysis
      • Transient Wave Ultrasonic Detection of Delaminations in Composite Sandwich Panels
      • Ultrasonic Detection of Delaminations in Composite Sandwich Panels Having Attenuation
      • Ultrasonic Studies for Microstructural Characterization of A98090 Aluminum-Lithium Alloy
      • Ultrasonic Techniques for Detection of High Temperature Hydrogen Attack
      • Ultrasonic Testing of Concrete Structures
      • Ultrasonic Testing of Welds by Time of Flight Diffraction: Codes, Guidelines and Standards
      • Ultrasonic Thickness Gaging Accuracy in Tubulars
      • Validation of Current Approaches for Pipeline Girth Weld Discontinuity Sizing Accuracy
    • 2004
      • Eddy Current Testing of Jet Engines
      • Examining the Knuckle Region of Hanford’s Double Shell Waste Tanks By Allan F. Pardini
      • Method of In Situ Thickness Measurement of Sputtering Target Bonded Assemblies Using the Bubbler Technique
      • Shear Wave Polarization Follows Twist of Rectangular Steel Bar
    • 2003
      • Aircraft Corrosion
      • Basics for Badges
      • Characterization of Microscopic Discontinuities Using the Liquid Immersion Technique
      • Data Fusion for NDT: What, Where, Why and How
      • Dispersion Curves in Guided Wave Testing
      • Eddy Current Testing in the Petrochemical Industry
      • Effect of Ultrasonic Beam Frequency and Focalization on Detectability and Resolution of Minute Discontinuities
      • Electrical Conductivity Testing of the Liberty Bell
      • Fluorescent Penetrant Testing and Color Vision Deficiencies
      • Guided Circumferential Waves and Their Applications in Characterizing Cracks in Annular Components
      • Guided Wave Simulation and Visualization by a Semianalytical Finite Element Method
      • Guided Wave Testing of Water Loaded Structures
      • Helium Mass Spectrometer Leak Testing of Dry Fuel Storage Containers
      • Integration of Nondestructive Testing into a Mechanics of Composite Materials Course
      • Laser/Air Hybrid Ultrasonic Technique for Railroad Wheel Testing
      • Limitations on the Detection of Casting Discontinuities Using Ultrasonics and Radiography
      • Making Science Fiction an Engineering Reality Using Biologically Inspired Technologies
      • Making the Right Ammeter Selection
      • Materials Science and NDT Technology Education at Don Bosco Technical Institute
      • Measuring Borescope Optical Quality
      • NDT of Precipitation Hardened Steels Using Fluorescent Magnetic Particle Testing
      • The Effective Dose for Radiographers in Nondestructive Testing: Proposed Conservative Method Validated by Phantom Measurements
      • The Role of Nondestructive Testing in Aircraft Damage Tolerance
      • The Use of Eddy Current for Ferritic Weld Testing in Nuclear Power Plants
      • Three Philosophies: Recalls, Statistics and NDT
      • Video Borescopes
    • 2002
      • Alternating Current Field Measurement: Getting New Technologies Accepted by Old Industries
      • A UK Perspective on Known Discontinuity Standards
      • Cost Benefit Applications Using the Alternating Current Field Measurement Testing Technique
      • Diagnosis of Thermal Aging of Cast Duplex Stainless Steel by Electromagnetic Ultrasonic Method
      • Helium Mass Spectrometer Leak Testing of Commercial Airliner Production Fuel Tanks
      • How and Why to Measure Magnetism Accurately
      • How Did This Come Up?
      • Laser Based and Air Coupled Ultrasound as Noncontact and Remote Techniques for Testing of Railroad Tracks
      • Nondestructive Inspection in the Propulsion Industry
      • Nondestructive Inspection Quantification and Aviation Safety
      • Rail Track Field Testing Using Laser/Air Hybrid Ultrasonic Technique
      • Reversing of Magnetic Poles in a Slot on the Workpiece Surface after Discontinuation of Longitudinal Magnetization
      • Standing on the Shoulders of Giants: An Example of Guided Wave Inspection
      • Testing Visual Acuity with the Jaeger Eye Chart
      • The Confederate Submarine H.L. Hunley and Nondestructive Testing
      • The Present and Future of Eddy Current Testing
      • The Use of Known Discontinuity Standards
      • The Use of Nondestructive Inspection in Jet Engine Applications
      • Volumetric X-Ray Testing
    • Subscribe
    • Contact
    • Search
    • Sitemap
  • ASNT.org
  • Contact
  • ASNT Membership

  • Sitemap
  • Code of Ethics
  • Privacy Policy

© 2015 The American Society for Nondestructive Testing. All Rights Reserved.

ASNT... Creating a Safer World!TM