Frequency modulated thermal wave imaging for visualizing power density of electromagnetic waves on plane surfaces

In this article, Frequency Modulated Thermal Wave Imaging (FMTWI) [1–6] is introduced for the first time for determining power distribution of electromagnetic waves on plane surfaces. The advantage with this technique is that we can extract multiple amplitude and phase images from a single run of experiment. The applied excitation signal in this technique is a frequency modulated chirp signal instead of a single frequency signal used in conventional lock-in infrared (IR) thermography [7–11]. The thermal images obtained using FMTWI can be used qualitatively, e.g., to detect field leakage near electromagnetic junctions and microstrip feed lines. As a practical demonstration of this technique, an example of 2 × 2 patch antenna array at 8 GHz is considered. First, amplitude images at various modulation frequencies are obtained. Next, signal to noise ratio (SNR) values at each frequency are calculated. It is seen that SNR is lower at higher frequencies. It is observed that at higher modulation frequencies, micro-strip lines feeding the individual patch antennas of the array, are not visible in amplitude images, while at lower frequencies they are clearly visible. Mathematical modeling of the microwave absorption screen has also been carried out to show variations of incident, reflected, and transmitted powers as a function of screen surface impedance. It is also observed that the screen minimally perturbs the electromagnetic fields.

References

[1] R. Mulaveesala, and S. Tuli. Appl. Phys. Lett. 89, 191913-1–191913-3 (2006).

[2] S. Tuli, and R. Mulaveesala. QIRT J. 2 (1), 41–54 (2005).

[3] R. Mulaveesala, and S. Tuli. Mater. Eval. 63 (10), 1046–1050 (2005).

[4] R. Mulaveesala, and S. Tuli. Insight 47 (4), 206–208 (2005).

[5] R. Mulaveesala, and S. Tuli. J. Ndt. & E. 5 (3), (2006).

[6] V. S. Ghali, and R. Mulaveesala. Insight-Non-Destruct. Test. 52 (9), 475–480 (2010).

[7] D. Balageas, P. Levesque, and A. Déom. Characterization of electromagnetic fields using lock-in IR thermography. Thermosense XV, Procedings SPIE 1933, SPIE, Orlando, FL, 1993. pp.274–285.

[8] K. Muzaffar, et al. Infrared Phys. Technol. 71, 464–468 (Jul. 2015).

[9] K. Muzaffar, S. Tuli, and S. Koul. Infrared Phys. Technol. 72, 244–248 (Sep. 2015).

[10] K. Muzaffar, S. Tuli, and S. Koul. IETE J. Res. 62, 81–90 (Oct. 2015).

[11] K. Muzaffar, S. Tuli, and S. Koul. Infrared thermography for determination of wavelength of microwave signals from interference pattern. 2nd International Conference on Signal Processing and Integrated Networks (SPIN), Feb. 19–20, 2015, Noida, Delhi-NCR, India, pp. 774–778.

[12] K. Chatterjee, et al. NDT E. Intern. 44, 655–667 (2011).

[13] L. I. Giri, and S. Tuli. Infrared Phys. Technol. 67, 526 (2014).

[14] K. Chatterjee. Ph.D. Thesis, Indian Institute of Technology Delhi, India, 2012.

[15] H. Bosman, Y. Y. Lau, and R. M. Gilgenbach, Microwave absorption on a thin film. Appl. Phys. Lett. 82, 1353 (2003).

[16] https://en.wikipedia.org/wiki/Sheet_resistance

[17] S. Ramo, J. R. Whinnery, and T. Van Duzer. Fields and Waves in Communication Electronics, 3rd (Wiley, New York, 1994), 290.

[18] C. A. Balanis. Antenna Theory: Analysis and Design (John Wiley & Sons, 2016).

Metrics
Usage Shares
Total Views
33 Page Views
Total Shares
0 Tweets
33
0 PDF Downloads
0
0 Facebook Shares
Total Usage
33