Article Article
Characterization of Wall-Loss Defects in Curved GFRP Composites Using Pulsed Thermography

Curved glass fiber–reinforced polymer (GFRP) composites are superior to alloy-steel pipes due to their excellent corrosive resistance properties, finding wide applications in the transportation of petrochemicals, chemical storage tanks, and power and water-treatment plants. Among the defects found in GFRP pipes, internal pitting or wall loss is one of the most severe, caused by material deterioration and the friction of small particles in the transfer fluid. This study investigates these in-service discontinuities using a pulsed thermal nondestructive evaluation technique. The paper focuses on the quantification of defect depth using the temperature peak contrast derivative and defect sizing using the full width at half maximum method. Further, the paper investigates the ability of pulsed thermography to estimate pitting or wall-loss defects at various depths and sizes through simulation and experimentation. Thermographic signal reconstruction images are used for quantification of defects at a deeper depth. The results of the present study are then compared with well-established ultrasonic C-scan results.



Almond, D.P., and S.K. Lau, 1994, “Defect Sizing by Transient Thermography. I. An Analytical Treatment,” Journal of Physics D: Applied Physics, Vol. 27, No. 5,

Almond, D.P., and P.M. Patel, 1996, Photothermal Science and Techniques, Chapman & Hall, UK

Almond, D.P., P. Delpech, M.H. Beheshtey, and P. Wen, 1996, “Quantitative Determination of Impact Damage and other Defects in Carbon Fiber Composites by Transient Thermography,” Proceedings Vol. 2944, Nondestructive Evaluation of Materials and Composites,

Amenabar, I., A. Mendikute, A. López-Arraiza, M. Lizaranzu, and J. Aurrekoetxea, 2011, “Comparison and Analysis of Non-destructive Testing Techniques Suitable for Delamination Inspection in Wind Turbine Blades,” Composites Part B: Engineering, Vol. 42, No. 5, pp. 1298–1305,

Baltzersen, Q., J. Bang, B. Moursund, and B. Melve, 1995, “Ultrasonic Inspection of Adhesive Bonded Coupler Joints in GRP Piping Systems,” Journal of Reinforced Plastics and Composites, Vol. 14, No. 4, pp. 362–377,

Britt, F., 1993, Design of FRP Piping Systems, Britt Engineering Inc., Birmingham, AL

Dong, J., B. Kim, A. Locquet, P. McKeon, N. Declercq, and D.S. Citrin, 2015, “Nondestructive Evaluation of Forced Delamination in Glass Fiber-Reinforced Composites by Terahertz and Ultrasonic Waves,” Composites Part B: Engineering, Vol. 79, pp. 667–675,

Colombo, C., F. Libonati, F. Pezzani, A. Salerno, and L. Vergani, 2011, “Fatigue Behaviour of a GFRP Laminate by Thermographic Measure-ments,” Procedia Engineering, Vol. 10, pp. 3518–3527,

Gashoot, S.R., and R.A. Al-Madani, 2014, “A Survey of GRP Pipes Defects and Damage due to Fabrication Processes,” International Conference on Production and Mechanical Engineering (ICPME’2014), 30–31 December, Bangkok, Thailand

Ghiseok, K., K.-S. Lee, H. Hur, S.-J. Kim, and G.-H. Kim, 2015, “NDE of Low-Velocity Impact Damage in GFRP Using Infrared Thermography Techniques,” Journal of the Korean Society for Nondestructive Testing, Vol. 35, No. 3, pp. 206–214,

Gholizadeh, S., 2016, “A Review of Non-destructive Testing Methods of Composite Materials,” Procedia Structural Integrity, Vol. 1, pp. 50–57,

Grosso, M., J.E.C. Lopez, V.M.A. Silva, S.D. Soares, J.M.A. Rebello, and G.R. Pereira, 2016, “Pulsed Thermography Inspection of Adhesive Composite Joints: Computational Simulation Model and Experimental Validation,” Composites Part B: Engineering, Vol. 106, pp. 1–9,

Hamzah, A.R., P. Delpech, M.B. Saintey, and D.P. Almond, 1996, “An Experimental Investigation of Defect Sizing by Transient Thermography,” Insight (Northampton), Vol. 38, pp. 167–170, 173, available at

Hassen, A.A., U.K. Vaidya, and F. Britt, 2015, “Structural Integrity of Fiber Reinforced Plastic Piping,” Materials Evaluation, Vol. 73, pp. 918–929 

Kalyanavalli, V., T.K. Abilasha Ramadhas, and D. Sastikumar, 2019, “Determination of Thermal Diffusivity of Basalt Fiber Reinforced Epoxy Composite Using Infrared Thermography,” Measurement, Vol. 134, pp. 673–678,

Khomenko, A., O. Karpenko, E. Koricho, M. Haq, G.L. Cloud, and L. Udpa, 2016, “Theory and Validation of Optical Transmission Scanning for Quan-titative NDE Of Impact Damage in GFRP Composites,” Composites Part B: Engineering, Vol. 107, pp. 182–191,

Khomenko, A., O. Karpenko, E.G. Koricho, M. Haq, G.L. Cloud, and L. Udpa, 2017, “Quantitative Comparison of Optical Transmission Scanning with Conventional Techniques for NDE of Impact Damage in GFRP Composites,” Composites Part B: Engineering, Vol. 123, pp. 92–104,

Lau, S.K., D.P. Almond, and J.M. Milne, 1991, “A Quantitative Analysis of Pulsed Video Thermography,” NDT & E International, Vol. 24, No. 4, pp. 195–202,

Maldague, X.P., 2001, Theory and Practice of Infrared Technology for Nondestructive Testing, Wiley

Meola, C., and G.M. Carlomagno, 2010, “Impact Damage in GFRP: New insights with Infrared Thermography,” Composites Part A: Applied Science and Manufacturing, Vol. 41, No. 12, pp. 1839–1847,

Montanini, R., and F. Freni, 2012, “Non-destructive Evaluation of Thick Glass Fiber-Reinforced Composites by Means of Optically Excited Lock-In Thermography,” Composites Part A: Applied Science and Manufacturing, Vol. 43, No. 11, pp. 2075–2082, .2012.06.004

Moskovchenko, A.I., V.P. Vavilov, R. Bernegger, C. Maierhofer, and A.O. Chulkov, 2020, “Detecting Delaminations in Semitransparent Glass Fiber Composite by Using Pulsed Infrared Thermography,” Journal of Nondestructive Evaluation, Vol. 39,

Pastuszak, P.D., 2016, “Characterization of Defects in Curved Composite Structures Using Active Infrared Thermography,” Procedia Engineering, Vol. 157, pp. 325–332,

Quek, S., and D.P. Almond, 2005, “Defect Detection Capability of Pulsed Transient Thermography,” Insight, Vol. 47, No. 4,

Ray, B.C., S.T. Hasan, and D.W. Clegg, 2007, “Evaluation of Defects in FRP Composites by NDT Techniques,” Journal of Reinforced Plastics and Composites, Vol. 26, No. 12, pp. 1187-1192,

Ringermacher, H.I., R.J. Archacki, and W.A. Veronesi, 1996, Nondestructive Testing: Transient Depth Thermography, US Patent 5,711,603, filed 30 October 1996, and issued 27 January 1998 

Saintey, M.B., and D.P. Almond, 1995, “Defect Sizing by Transient Thermography. II. A Numerical Treatment,” Journal of Physics D: Applied Physics, Vol. 28, No. 12,

Scott, I.G., and C.M. Scala, 1982, “A Review of Non-destructive Testing of Composite Materials,” NDT International, Vol. 15, No. 2, pp. 75–86,

Shen, G., and T. Li, 2007, “Infrared Thermography for High-Temperature Pressure Pipe,” Insight, Vol. 49, No. 3, pp. 151–153,

Sharath, D., M. Menaka, and B. Venkatraman, 2012, “Defect Characterization Using Pulsed and Lock in Thermography: A Comparative Study,” Journal of Nondestructive Testing & Evaluation, Vol. 11, pp. 58–63

Sharath, D., M. Menaka, and B. Venkatraman, 2013, “Defect Characterization Using Pulsed Thermography,” Journal of Nondestructive Evaluation, Vol. 32, pp. 134–141,

Shepard, S.M., 2000, Temporal Noise Reduction, Compression and Analysis of Thermographic Image Data Sequences, US Patent 6,516,084 B2, filed 4 December 2000, and issued 4 February 2003

Sun, J.G., 2006, “Analysis of Pulsed Thermography Methods for Defect Depth Prediction,” Journal of Heat Transfer, Vol. 128, No. 4, pp. 329–338,

Thermo-Calc Software, 1998, 6L Operation Manual

Vijayaraghavan, G.K., and S. Sundaravalli, 2011, “Evaluation of Pits in GRP Composite Pipes by Thermal NDT Technique,” Journal of Reinforced Plastics and Composites, Vol. 30, No. 19, pp. 1599–1604,

Wright, M., 2006, “Ultrasonic Nondestructive Evaluation of GRP Pipes – Sure2GriP – Quality Assurance and Structural Evaluation of GRP Pipes Horizontal Research Activities Involving SMEs Co-operative Research Project Funded by the European Commission,” ECNDT 2006

Wysocka-Fotek, O., M. Maj, and W. Oliferuk, 2015, “Use of Pulsed IR Thermography for Determination of Size and Depth of Subsurface Defect Taking into Account the Shape of its Cross-Section Area,” Archives of Metallurgy and Materials, Vol. 60,

Yakovlev, E.V., K.I. Zaytsev, I.N. Fokina, V.E. Karasik, and S.O. Yurchenko, 2014, “Nondestructive Testing of Polymer Composite Materials Using THz Radiation,” Journal of Physics: Conferences Series,

Zeng, Z., N. Tao, L. Feng, and C. Zhang, 2012, “Specified Value Based Defect Depth Prediction Using Pulsed Thermography,” Journal of Applied Physics, Vol. 112, No. 2,


Usage Shares
Total Views
179 Page Views
Total Shares
0 Tweets
0 PDF Downloads
0 Facebook Shares
Total Usage