Article Article
An Experimental Study on Phased Array Ultrasonic Testing for Internal Inspection of Gas Storage Wells

A reduction in wall thickness, caused by corrosion, of the inner and outer surfaces of underground compressed natural gas storage wells is one of the main causes of failure. Therefore, taking wall thickness measurements is an important task during periodic inspection. This study proposes a corrosion detection technique based on the well’s shape using cylindrical convex ultrasonic phased array and develops a cylindrical convex phased array probe with 512 elements. Using an example well of ∅177 × 10.36 mm, the influences of process parameters such as active aperture, focal length, gain, and gate threshold are studied. In addition, an experiment is conducted on a sample well with artificial defects for parameters optimization. Next, experimental tests are carried out on the well at the test platform according to the optimized parameters. The results show that the proposed technique is of high sensitivity and efficiency for the detection of corrosion defects and is able to detect pitting corrosion of more than ∅2 mm and line corrosion of 1 mm width.

DOI: https://doi.org/10.32548/2022.me-04278

References

Fangfang, S., 2009, “Research on Focusing and Imaging Characteristics of Curved Ultrasonic Phased Array,” dissertation, Beijing: Chinese Academy of Sciences

Hui, Z., and L. Shuqing, 2008, Ultrasonic Testing, Beijing: Xinhua Press Huifang, L., Z. Peng, Z. Junjie, and Y. Lin, 2008, “Current Situation and Development Trend of Corrosion Testing Technology in Oil and Gas Pipelines,” Pipeline Technology and Equipment, Vol. 5, pp. 46–48, 56, https://doi.org/10.3969/j.issn.1001-4837.2013.09.009

Jing, Z., 2008, “Research on Signal Processing of Ultrasonic Internal Inspection of Pipeline Corrosion Cracks,” dissertation, Beijing University of Chemical Technology

Lijian, Y., Z. Guoguang, and L. Gang, 2014, Internal Inspection Technology of Pipeline Magnetic Flux Leakage, Beijing: Chemical Industry Press

Moles, M., N. Dubé, S. Labbé, and E. Ginzel, 2005, “Review of Ultrasonic Phased Arrays for Pressure Vessel and Pipeline Weld Inspections,” Journal of Pressure Vessel Technology, Vol. 127, No. 3, pp. 351–356, https://doi.org/10.1115/1.1991881

Weican, G., Q. Shengjie, and M. Cunjian, 2017, “Simulation of Convex Phased Array at Water-Steel Interface,” Nondestructive Testing, Vol. 39, No. 5, pp. 70–75, https://doi.org/10.11973/wsjc201705015

Xiang, L., 2009, “Research on Pipeline Visual Inspection Technology,” dissertation, Shenyang University of Technology

Xiong, X., 2013, “Rotating Ultrasonic Testing Technology in Heat Exchange Tubes,” Pressure Vessel, Vol. 30, No. 9, pp. 60–64

Yifu, L., and J. Nanxiang, 1990, “Calculation of Focused Sound Field of Convex Phased Array Probe of Type B Ultrasonic Diagnosis Apparatus,” Chinese Journal of Biomedical Engineering, Vol. 9, No. 2, pp. 127–133

 

Metrics
Usage Shares
Total Views
68 Page Views
Total Shares
0 Tweets
68
0 PDF Downloads
0
0 Facebook Shares
Total Usage
68