Article Article
A Remote Temperature Measurement Using FSS-Based Sensing

This paper presents a Frequency Selective Surface (FSS) based sensor for temperature sensing. The proposed sensor operates in Ku-band and measures changes in temperature using a rectangular patch-based unit cell that includes a conductor backed temperature-sensitive substrate. Changes in temperature are sensed by monitoring the change in resonant frequency of the FSS when interrogated by an incident electromagnetic signal linearly polarized parallel to the long dimension of the rectangular patch element. Simulation results of temperature measurement over a temperature difference (with respect to ambient, i.e., 23 ˚C) of 0˚C - 200˚C are presented. The simulated results indicate that the average value of sensitivity and error of the sensor, respectively, is 350 MHz and 29 MHz for a 50˚C change in temperature.

DOI: 10.32548/RS.2022.008

References

[1] B. A. Munk, Frequency Selective Surfaces Theory and Design, New York: Wiley, 2000.

[2] S. M. Ramesh, M. Mahmoodi and K. M. Donnell, "On the Effect of Design Parameters on Fringing Fields of a Loop-Based FSS," 2021 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (APS/URSI), 2021, pp. 1081-1082.

[3] S. M. Ramesh and K. M. Donnell, "Small-And Large-Scale Strain Sensing Using Frequency Selective Surfaces," 2021 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (APS/URSI), 2021, pp. 627-628.

[4] V. Sanphuang, N. K. Nahar and J. L. Volakis, "THz spatial filter integrating bimaterial switching for sensors," 2016 IEEE International Symposium on Antennas and Propagation (APSURSI), 2016, pp. 259-260.

[5] M. Mahmoodi and K. M. Donnell, "Novel FSS-based sensor for concurrent temperature and strain sensing," 2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, 2017, pp. 679-680.

[6] J. Lorenzo, A. Lázaro, R. Villarino and D. Girbau, "Modulated Frequency Selective Surfaces for Wearable RFID and Sensor Applications," in IEEE Transactions on Antennas and Propagation, vol. 64, no. 10, pp. 4447-4456, Oct. 2016.

[7] Tao Liu, Chuang Qu, Mahmoud Almasri, Edward Kinzel, "Design and analysis of frequency-selective surface enabled microbolometers," Proc. SPIE 9819, Infrared Technology and Applications XLII, 98191V (20 May 2016).

[8] Balanis, C. A., Advanced Engineering Electromagnetics, Wiley, 1989, Ch. 8.

[9] “Dupont Kapton: Summary of Properties” specification sheet.

[10] Technical Report AFML-TR-72-39, pp.169.

[11] J. W. Sanders, J. Yao and H. Huang, "Microstrip Patch Antenna Temperature Sensor," in IEEE Sensors Journal, vol. 15, no. 9, pp. 5312-5319, Sept. 2015.

[12] Alexander, Charles K., Matthew NO Sadiku, and Matthew Sadiku, Fundamentals of electric circuits, Boston: McGraw-Hill Higher Education, 2007.

Metrics
Usage Shares
Total Views
19 Page Views
Total Shares
0 Tweets
19
0 PDF Downloads
0
0 Facebook Shares
Total Usage
19