Article Article
Steel Rope Diagnostics by Magnetic NDT: From Defect Detection to Automated Condition Monitoring

Today it is hard to imagine an industry or an application that uses steel wire ropes in which the application of a magnetic flaw detector would be unsuitable. The ropes of loading cranes, mine hoists, ropeways, cable-stayed bridges, flare stacks, antenna masts, overhead power transmission lines, and other installations are not only subject to regular inspections (Sukhorukov and Mironenko 2003; Kotelnikov and Sukhorukov 2006; Sukhorukov et al. 2014), but the appropriate guidelines for these rope types are now described in industrial standards such as the International Organization for Standardization (ISO) standard for crane ropes, ISO 4309 (ISO 2017); the European Standards (EN) standard for ropeways, EN 12927 (BSI 2019); and the International Marine Contractors Association (IMCA) standards for offshore ropes, IMCA LR 004, IMCA HSSE 023, and IMCA M 197 Rev.1 (IMCA 2018). This paper examines how magnetic flux leakage testing (MFL) is used as the basis for an automated wire rope condition monitoring system, in which the human factor is completely removed.

DOI: https://doi.org/10.32548/2021.me-04149

References

Anisimov, A., I.I. Shpakov, and D.A. Slesarev, 2018, “Prospects for Condition Monitoring for Ropes of Mine Hoists,” Proceedings of the 25th World Mining Congress – Astana, Kazakhstan, Ministry of Investments and Development of the Republic of Kazakhstan

BSI, 2019, BS EN 12927: Safety Requirements for cableway installations designed to carry persons – Ropes, British Standards Institution

Costello, G., 1997, Theory of Wire Rope, Springer Verlag, New York

Feyrer, K., 2007, Wire Ropes: Tension, Endurance, Reliability, Springer Verlag, Berlin

Glushko, M., 2016, Steel Lifting Wire Ropes, Astroprint, Odessa (in Russian)

Gronau, O., S.B. Belitsky, and V.V. Sukhorukov, 2000, “NDT of Steel Ropes with Magnetic Flaw Detectors: Documentation and Interpretation of Test Results,” 15th World Conference on Nondestructive Testing, Rome, Italy

IMCA, 2018, IMCA LR 004, IMCA HSSE 023, IMCA M 197 Rev. 1: Guidance on Examination of Steel Wire Rope Through Magnetic Rope Testing (MRT), International Marine Contractors Association, France

ISO, 2017, ISO 4309:2017.8: Cranes – Wire Ropes – Care, Maintenance, Installation, Examination and Discard, Beuth Verlag, Berlin

Kotelnikov, V., and V.V. Sukhorukov, 2006, “Rope NDT as Means to Raise Safety of Crane and Elevator Use,” CINDE Journal, pp. 11–15

Malinovskiy, V.A., 2002, Steel Ropes, in 2 Parts: Part 2, Astroprint, Odessa (in Russian)

Marias, J., and N. Bester, 2011, “A Holistic Approach to Continuous Rope Monitoring,” OIPEEC Conference 2011, College Station, TX

Mironenko, A., and I.I. Shpakov, 2016, “Wire Ropes Condition Monitoring: Conception and Implementation,” 19th International Conference VVaPOL, Podbanske, Slovakia, pp. 7–13

Russian Federation, 2017, RD 03-348-00: Methodical instructions for magnetic flaw detection of steel ropes. Basic provisions, Russian Federation Norm, Moscow (in Russian)

SABS, 2007, SANS 10369: Non-destructive Examination and Testing of Steel Wire Rope, SABS Standards Division, Pretoria, South Africa

Slesarev, D., O.P. Potekhin, I.I. Shpakov, V.Yu. Volokhovsky, and A.N. Vorontsov, 2008, “Calf Line Condition Monitoring of Rigs for Production and Exploratory Drilling of Oil and Gas Boreholes: Technology, Efficiency, Prospects,” Occupational Safety in Industry, No. 6, pp. 12–22 (in Russian)

Slesarev, D., V.V. Sukhorukov, and A.V. Semenov, 2014, “Application of MFL Non-Destructive Testing for Automated Rope Condition Monitoring,” The 11th European Conference on Non-Destructive Testing (ECNDT 2014), 6–10 October 2014, Prague, Czech Republic

Standartinform, 2009, GOST 20911-89: Technical diagnostics. Terms and definitions, Standartinform (in Russian)

Sukhorukov, V., 2007, “Steel Ropes NDT of Cranes of Metallurgical Works,” The 14th International Conference on Investigation, Production and Use of Steel Wire Ropes (VVaPOL 2007), Podbanske, Slovakia

Sukhorukov, V., and A.S. Mironenko, 2003, “Monitoring of Mine Hoist Ropes at the Norilsk Nickel Company,” Proceedings of the International Conference on Mining Transport, 24–26 September, Szczyrk, Poland, pp. 111–118

Sukhorukov, V., D.A. Slesarev, and A.N. Vorontsov, 2014, “Electromagnetic Inspection and Diagnostics of Steel Ropes: Technology, Effectiveness and Problems,” Materials Evaluation, Vol. 72, No. 8, pp. 1019–1027

Sukhorukov, V., V.S. Kotelnikov, V.G. Zhukov, and A.A. Khudoshin, 2003, “Importance of Rope NDT for Safe Lifting of Loading Cranes,” Proceedings of OIPEEC Technical Meeting, Lenzburg, Switzerland, pp. 131–136

Vorontsov, A., V.Yu. Volokhovsky, and V.V. Sukhorukov, 2013, “Hot Metal Crane Ropes: Magnetic NDT, Capacity Simulation, Strength Safety Temperature Criterion,” Proceedings of the OIPEEC Conference, Oxford, UK, 10–12 March, pp. 33–42

 

Metrics
Usage Shares
Total Views
61 Page Views
Total Shares
0 Tweets
61
0 PDF Downloads
0
0 Facebook Shares
Total Usage
61