Inspection of Welding Discontinuities in Tubular-Type Transmission Towers Using Metal Magnetic Memory

Publication Date: 1 December 2018
Publication: Materials Evaluation, Volume 76, Issue 12, pgs. 1662 - 1669
Author(s): Gyejo Jung, Minhhuy Le, Yeong Min Lee, Sang Ki Park, Byoung Mok Park, Jungmin Kim, Heejong Lee, Jinyi Lee

Establishing a Micro Radiation Protection Zone

Publication Date: 1 December 2018
Publication: Materials Evaluation, Volume 76, Issue 12, pgs. 1590 - 1598
Author(s): H.M. Yang, W.L. Zhou, Y. Yan, X.F. Zhang

Inspection of Bend Discontinuities Based on the Comparison of the Frequency Responses of Ultrasonic Guided Waves in Small Diameter Tubes

Publication Date: 1 December 2018
Publication: Materials Evaluation, Volume 76, Issue 12, pgs. 1639 - 1648
Author(s): Haiquan Geng, Yuemin Wang, Le Chen, Wenli Deng

Cataloging Flaws for Additive Manufactured Components Is a Red Herring

Publication Date: 1 December 2018
Publication: Materials Evaluation, Volume 76, Issue 12, pgs. 1603 - 1608
Author(s): John C. Duke, Jr.

Signal Characteristics of Circular Induction Coil Influenced by Scanning Spatial Location in MFL

Publication Date: 1 December 2018
Publication: Materials Evaluation, Volume 76, Issue 12, pgs. 1649 - 1661
Author(s): Xiaoming Huang, Jianbo Wu, Jie Wang, Rongbiao Wang, Jian Tang, Yihua Kang, Hui Fang

Characterization of Hydrogen Embrittlement in 2.25cr-1mo-0.25v Steel by Eddy Current Method

Publication Date: 1 November 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 4, pgs. 212 - 220
Author(s): Haiting Zhou, Chi Xu, Qingming Wang, Hongliang Pan, Jianjun Chen

Investigation of the Deep Drawing Process by Means of Acoustic Emission Characteristics

Publication Date: 1 November 2018
Publication: Materials Evaluation, Volume 76, Issue 11, pgs. 1525 - 1531
Author(s): Mehdi Ahmadi Najafabadi, Manouchehr Salehi, M.R. Morovvati, Mahmood Hasani, Seyed Ali Ebrahimian, Cevat Teymuri-Sindi

Characterization of Damage Using Ultrasonic Testing on Different Types of Concrete

Publication Date: 1 November 2018
Publication: Materials Evaluation, Volume 76, Issue 11, pgs. 1532 - 1541
Author(s): Jason MaximinoC. Ongpeng, Andres WinstonC. Oreta, Sohichi Hirose

Proper Basic Thermal Imager Settings for Thermographic Inspections

Publication Date: 1 November 2018
Publication: Materials Evaluation, Volume 76, Issue 11, pgs. 1470 - 1477
Author(s): Sonny James

Unmanned Aerial Vehicle (UAV)-Based Assessment of Concrete Bridge Deck Delamination Using Thermal and Visible Camera Sensors: A Preliminary Analysis

Publication Date: 1 November 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 4, pgs. 183 - 198
Author(s): Rudiger Escobar-Wolf, Thomas Oommen, Colin N. Brooks, Richard J. Dobson, Theresa M. Ahlborn, PhD, PE

Characteristics of Wave Propagation in Austenitic Stainless Steel Welds and Its Application in Ultrasonic TOFD Testing

Publication Date: 1 November 2018
Publication: Materials Evaluation, Volume 76, Issue 11, pgs. 1515 - 1524
Author(s): Zhenhua Chen, Feiming Xie, Chao Lu

Moisture Measurements in Heritage Masonries: A Review of Current Techniques

Publication Date: 1 November 2018
Publication: Materials Evaluation, Volume 76, Issue 11, pgs. 1478 - 1487
Author(s): Rosa Agliata, Roberto Greco, Luigi Mollo

Applicability of the Magnetic Barkhausen Noise Method for Nondestructive Measurement of Residual Stresses in the Carburized and Tempered 19CrNi5H Steels

Publication Date: 1 November 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 4, pgs. 221 - 236
Author(s): H. Hizli, C. Hakan GUR

Eddy Current Testing of Delamination in Carbon Fiber Reinforced Polymer (CFRP): A Finite Element Analysis

Publication Date: 1 November 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 4, pgs. 199 - 211
Author(s): Zhiwei Zeng, Shaoni Jiao, Fei Du, Lei Sun, Jian Li

A predictive model for characterizing hardness of D2 tool steel by eddy current method: A statistical optimization approach

Publication Date: 1 November 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 4, pgs. 237 - 254
Author(s): Taha-Hossein Hejazi, Saeed Kahrobaee

Advancing Drone Use Beyond Visual Inspection: Nondestructive Testing Utilizing Aerial Robotic Systems

Publication Date: 28 October 2018
Conference: , pgs. 1 - 8 Author(s): Jamie L. Branch

Foreign Object Identification within a Laminated Carbon Fiber Composite Using Pulse-Echo Ultrasonics

Publication Date: 28 October 2018
Conference: , pgs. 1 - 10 Author(s): Nathaniel Blackman, David Jack

NDE Proficiency Demonstration

Publication Date: 28 October 2018
Conference: , pgs. 1 - 3 Author(s): Michael L. Turnbow

Failure analysis of automotive ultrasonic parking sensors by X ray computed Tomography

Publication Date: 28 October 2018
Conference: , pgs. 1 - 11 Author(s): Miguel AngelNeri Flores, Gregorio Vazquez Olvera

Practical and Economic Advantages of FMC/TFM

Publication Date: 28 October 2018
Conference: , pgs. 1 - 6 Author(s): Casper Wassink, Guillaume Neau

Non-Contact Ultrasonic Quality Analysis of Large Finished Aerostructures

Publication Date: 28 October 2018
Conference: , pgs. 1 - 6 Author(s): Anuj M. Bhardwaj, Whitney J. Moon, Kashyap C. Patel

Challenges and Opportunities in the Advancement of NDT in Aerospace

Publication Date: 28 October 2018
Conference: , pgs. 1 - 7 Author(s): Venkata Ganesh Kota

Application of Non-Destructive Testing, ANSYS Analysis and Advanced Microstructural Characterization to Detect-Locate-Define and Simulate Defects in AHSS Steel Slabs

Publication Date: 28 October 2018
Conference: , pgs. 1 - 11 Author(s): Zhanfang Wu, Hsiang-Ling Juan, C. Isaac Garcia

Ultrasonic Testing for Detection and Sizing of Circumferential Cracking in Turbine Rotors

Publication Date: 28 October 2018
Conference: , pgs. 1 - 2 Author(s): Teodoro Leon-Salamanca, Ph.D., Michael C. Monaco, Stan Kaminski

Effect of Damaged Structural Members on Performance Degradation of a Vertical Lift Truss Bridge

Publication Date: 28 October 2018
Conference: , pgs. 1 - 10 Author(s): Vahid Shahsavari, Milad Mehrkash, Erin Santini-Bell

Use of Flexible Phased Array Technology for Corrosion Inspection on Pipe Elbows

Publication Date: 28 October 2018
Conference: , pgs. 1 - 10 Author(s): Simon Alain

Using Excitation Modulation and Coding to Achieve Submillimeter Resolution In Materials Previously Impenetrable

Publication Date: 28 October 2018
Conference: , pgs. 1 - 10 Author(s): Chris Leskiw

Acousting Emission Evaluation of Corrosion Damage on Bottom Plate of Above Ground Storage Tanks

Publication Date: 28 October 2018
Conference: , pgs. 1 - 9 Author(s): Daisuke Kai

Acoustic Emission Evaluation of Corrosion Damage on Bottom Plate of Above-ground Storage Tanks

Publication Date: 28 October 2018
Conference: , pgs. 1 - 9 Author(s): Daisuke Kai

Development of Extended Range Piping Calibration Blocks for Ultrasonic Weld Examination

Publication Date: 28 October 2018
Conference: , pgs. 1 - 10 Author(s): Paul Holloway, Andrew Robinson

How To Fully Utilize Your Phased Array System

Publication Date: 28 October 2018
Conference: , pgs. 1 - 8 Author(s): Jesse Groom, Zack Groom

Automatic Ultrasonic Testing Technique for AZ80 Magnesium Alloy Cartridges

Publication Date: 1 October 2018
Publication: Materials Evaluation, Volume 76, Issue 10, pgs. 1414 - 1420
Author(s): Xiongbing Li, Duo Lyu, Xuanrun Wang, Peijun Ni, Feng Chen, Yongfeng Song

Smart Concrete for Enhanced Nondestructive Evaluation

Publication Date: 1 October 2018
Publication: Materials Evaluation, Volume 76, Issue 10, pgs. 1395 - 1404
Author(s): Simon Laflamme, David Eisenmann, Kejin Wang, Filippo Ubertini, Irvin Pinto, Akira DeMoss

Electrical Resistance Tomography–Based Sensing Skin with Internal Electrodes for Crack Detection in Large Structures

Publication Date: 1 October 2018
Publication: Materials Evaluation, Volume 76, Issue 10, pgs. 1405 - 1413
Author(s): Reza Rashetnia, Omar Khalaf Alla, Guillermo Gonzalez-Berrios, Aku Seppanen, Mohammad Pour-Ghaz

Effect of Structural Parameters on Coupling Interference of Arrayed Eddy Current Testing

Publication Date: 1 October 2018
Publication: Materials Evaluation, Volume 76, Issue 10, pgs. 1292 - 1298
Author(s): Yang Li, Ling Ren, Saibo She, Yechao Li, Jing Nie, Jingbin Li

Fracture Mechanics–based Acceptance Criteria and Discontinuity Sizing with Phased Arrays

Publication Date: 1 September 2018
Publication: Materials Evaluation, Volume 76, Issue 9, pgs. 1173 - 1176
Author(s): Anmol Birring

Experimental Measurement of Metal Strength and Stiffness Using a Double-Side 3D Digital Image Correlation Setup

Publication Date: 1 September 2018
Publication: Materials Evaluation, Volume 76, Issue 9, pgs. 1207 - 1217
Author(s): Bernard Sia, Guobiao Yang, Junrui Li, Liangxiang Yang

Demonstration of a Spectral Profile Multiplexing Algorithm to Demodulate Fiber Bragg Grating Strain Sensors with a Narrowband Light Source

Publication Date: 1 September 2018
Publication: Materials Evaluation, Volume 76, Issue 9, pgs. 1218 - 1227
Author(s): William Stewart, Guodong Guo, Kara Peters

Time Resolution Improvement of Linear Chirp Excitation Ultrasonic Testing Based on Frequency-Phase-Amplitude Modulation Excitation

Publication Date: 1 September 2018
Publication: Materials Evaluation, Volume 76, Issue 9, pgs. 1228 - 1238
Author(s): Jiaying Zhang, Tie Gang, Chaofeng Ye, Sen Cong, Shangyang Lin

NDT Inspection of Concrete Structures: Complementarity of Ground Penetrating Penetrating Radar, Ultrasonic Tomography and Eddy Current methods

Publication Date: 27 August 2018
Conference: , pgs. 224 - 234 Author(s): Guido Tronca, David Corbett, Isaak Tsalicoglou

Life-Cycle NDT Planning of Fatigue-Critical Bridge Details Based on Discounted Discounted Utility Theory

Publication Date: 27 August 2018
Conference: , pgs. 91 - 98 Author(s): Minghui Cheng, David Y. Yang, Dan M. Frangopol

Nondestructive Assessment of a Retaining Wall of Former Coal Mine Plant

Publication Date: 27 August 2018
Conference: , pgs. - Author(s): Herbert Wiggenhauser, Matthias Behrens, Dorothee Moser, Ralf M. Moryson, Sergey Pudovikov, Hans-Georg Herrmann

NDT Procedures in Relation to Quality Assurance and Validation of Nondestructive Testing in Civil Engineering

Publication Date: 27 August 2018
Conference: , pgs. 31 - 38 Author(s): Daniel Algernon, Ralf W Arndt, Walzer Denzel, Bente Ebsen, Sascha Feistkorn, Martin Friese, Christian U. Groe, Susanne Kathage, Sylvia Keler, Christian Kopp, Stefan Kuttenbaum, Carsten Lohse, Stefan Maack, Ernst Niederleithinger, Martin Schickert, Gunnar Schroder, Alexander Taffe, Juri Timofeev, Andrei Walther, Martin Wilcke, Julia Wolf, Jens Wostmann

Inversion of Air-Coupled Surface Wave Pavement Testing Data Based on Individual Receiver Spacing Approach

Publication Date: 27 August 2018
Conference: , pgs. 23 - 30 Author(s): Hiba Al-Adhami, Nenad Gucunski

Inspection on the Complex Foundations of Overwater Bridges

Publication Date: 27 August 2018
Conference: , pgs. - Author(s): Helsin Wang, Chih-Hsin Hu, Sheng-Hsiung Hsieh, Yao-Chu Tsai

In Situ Inspection Of Concrete Structures Using A Rolling Ultrasound Scanner

Publication Date: 27 August 2018
Conference: , pgs. - Author(s): Kamal Raj CHAPAGAIN, Werner BJERKE, Terje MELANDSO, Sanat WAGLE

Inferring Dynamic Characteristics of a Bridge through Numerical Simulation and and Low-Magnitude Shaking as a Global NDE Method

Publication Date: 27 August 2018
Conference: , pgs. 121 - 130 Author(s): Sharef Farrag, Nenad Gucunski, Franklin Moon, John DeVitis, Brady Cox, Farnyuh Menq

Impulse-Response Testing for Quality Assessment of Cast-In-Place Concrete Pile Foundations

Publication Date: 27 August 2018
Conference: , pgs. 161 - 170 Author(s): Stephen M. Garrett, W. Robert Hannen, Thomas J. Rowe, John S. Lawler

Condition Assessment of Concrete Beam Using a Laser Vibrometer

Publication Date: 27 August 2018
Conference: , pgs. 244 - 252 Author(s): Piotr Wiciak, Giovanni Cascante, Maria A. Polak

Fully Automated Visualization of Concrete Bridge Deck Condition from GPR Data

Publication Date: 27 August 2018
Conference: , pgs. 110 - 120 Author(s): Kien Dinh, Nenad Gucunski

Non-destructive Measurements of Residual Stresses in Bridges Using an Ultrasonic Method

Publication Date: 27 August 2018
Conference: , pgs. - Author(s): Jacob Kleiman

Field Validation of Multipurpose Wireless Sensors for Bridge Assessment

Publication Date: 27 August 2018
Conference: , pgs. 151 - 160 Author(s): Mustafa O. Furkan, Qiang Mao, Stylianos Livadiotis, Charles Young, Matteo Mazzotti, A. Emin Aktan, S. Paul Sumitro, Fred Faridazar, Ivan Bartoli

Decommissioned Bridges: Ideal Test Objects for Demonstrating the Capabilities of Nondestructive Testing Methods

Publication Date: 27 August 2018
Conference: , pgs. 140 - 150 Author(s): Martin Friese

Evaluation of Pavement Performance under FWD Test through Instrumented Pavement Section

Publication Date: 27 August 2018
Conference: , pgs. 192 - 197 Author(s): Zafrul Khan, Mesbah Ahmed, Rafiqul Tarefder

Effects of Concrete Delamination and Cracking on Electrical Resistivity Measurement Results

Publication Date: 27 August 2018
Conference: , pgs. - Author(s): M.J. Khudhair, N. Gucunski

Detection of Buried Trolley Tracks Using Multichannel 3D Ground Penetrating Radar Tech

Publication Date: 27 August 2018
Conference: , pgs. 80 - 90 Author(s): Manuel Celaya, Kaz Tabrizi, Omar Hameed

Full-Depth Assessment of Concrete Bridge Decks in A GPR Survey: A Machine Learning Approach

Publication Date: 27 August 2018
Conference: , pgs. 179 - 187 Author(s): Arezoo Imani, Shahin Saadat, Nenad Gucunski

Nondestructive Evaluation of Concrete Material Properties for Nuclear Power Plant Survey: Results in the Laboratory and on the VeRCoRS Mock-Up

Publication Date: 27 August 2018
Conference: , pgs. 14 - 22 Author(s): O. Abraham, J.F. Chaix, V. Garnier, J.M. Henault, J.B. Legland, C. Ciccarone, H. Sogbossi, G. Villain, B. Piwakowski, J. Verdier, O. Durand, G. Gugole, S. Rakotonarivo, X. Derobert, R. Drelich

Detection of ion ingress by laser induced breakdown spectroscopy for evaluation remaining lifetime of a concrete structure

Publication Date: 27 August 2018
Conference: , pgs. - Author(s): Gerd Wilsch, Tobias Gunther, Steven Millar, Tobias Volker

Nuclear Power Plant containment wall mock-up for long-term NDE

Publication Date: 27 August 2018
Conference: , pgs. - Author(s): Miguel Ferreira, Edgar Bohner, Ville Sjoblom, Fahim Al-Neshawy, Teemu Ojala

Quantified Non-destructive Evaluation of a Concrete Bridge Using Coda Wave Interferometry

Publication Date: 27 August 2018
Conference: , pgs. 253 - 258 Author(s): Hanwan Jiang, Hanyu Zhan, Ruinian Jiang, Chenxu Zhuang

Quality Management of Concrete Construction by Digitalizing the Process Chain from Batching Plant to Building

Publication Date: 27 August 2018
Conference: , pgs. 68 - 76 Author(s): Edgar Bohner, Tapio Vehmas, Matti Okkonen, Markku Kiviniemi, Pertti Lahdenpera, Arto Laikari, Miguel Ferreira

Aerial vs. Vehicle-Based Infrared Thermography for Bridge Deck Delamination Detection

Publication Date: 27 August 2018
Conference: , pgs. 171 - 178 Author(s): Evan Guarino, Ken Maser, Adam Carmichael

ProTimB - Monitoring of Structurally Protected Timber Bridges

Publication Date: 27 August 2018
Conference: , pgs. 58 - 67 Author(s): Ralf W. Arndt, Johannes Koch, Antje Simon, Markus Jahreis

Prospects for Integrating Augmented Reality Visualization of Nondestructive Testing Results into Model-based Infrastructure Inspection

Publication Date: 27 August 2018
Conference: , pgs. 214 - 223 Author(s): Martin Schickert, Christian Koch, Frank Bonitz

System Identification of a Bridge Gusset-Less Connection by Simplified and Detailed Local Analytical Models

Publication Date: 27 August 2018
Conference: , pgs. - Author(s): Milad Mehrkash, Erin Santini-Bell

Phase Analysis of Data from Air-Coupled Impact Echo Testing of Concrete Decks

Publication Date: 27 August 2018
Conference: , pgs. 49 - 57 Author(s): Najjiya Almallah, Mahmoud Al-Quzwini, Nenad Gucunski

Testing Seismic Techniques for Imaging Structural Defects in Engineered Drilled Shafts – A Case Study

Publication Date: 27 August 2018
Conference: , pgs. 99 - 109 Author(s): Jozef Joe Descour, Farrokh Frank Jalinoos, Anil K. Agrawal

Test Specimen Concepts in Regard to Quality Assurance and Validation of Nondestructive Testing in Civil Engineering

Publication Date: 27 August 2018
Conference: , pgs. 39 - 48 Author(s): Daniel Algernon, Ralf W Arndt, Walzer Denzel, Bente Ebsen, Sascha Feistkorn, Martin Friese, Christian U. Groe, Susanne Kathage, Sylvia Keler, Christian Kopp, Stefan Kuttenbaum, Carsten Lohse, Stefan Maack, Ernst Niederleithinger, Martin Schickert, Gunnar Schroder, Alexander Taffe, Juri Timofeev, Andrei Walther, Martin Wilcke, Julia Wolf, Jens Wostmann

The Effectiveness of Ultrasonic Peening Improvement Treatment in Maintenance and Repair of Bridges

Publication Date: 27 August 2018
Conference: , pgs. 198 - 207 Author(s): J. Kleiman, Y. Kudryavtsev

Vertical Profiling Ultra-Seismic Inspection to Evaluate Model Pile Depths

Publication Date: 27 August 2018
Conference: , pgs. 235 - 243 Author(s): Helsin Wang, Thanh Vinh Nguyen, Chung-Yue Wang

The LAUS: First Applications of a New System for Ultrasonic Imaging of Very Concrete Structures

Publication Date: 27 August 2018
Conference: , pgs. 208 - 213 Author(s): Ernst Niederleithinger, Herbert Wiggenhauser

Addressing the Need to Monitor Concrete Fatigue with Nondestructive Testing: Results of Infrastar European Project

Publication Date: 27 August 2018
Conference: , pgs. 2 - 13 Author(s): O. Abraham, E. Niederleithinger, X. Chapeleau, P. Klikowicz, E. Bruhwiler, A. Bassil, X. Wang, J. Chakraborty, I. Bayane, D. Leduc, M. Salamak, A. Katunin, J.D. Sorensen

Nondestructive Testing in Civil Engineering Requirements for the practical application and state of the art in Switzerland (Research Project AGB 2012/016 for the Federal Roads Office; FEDRO)

Publication Date: 27 August 2018
Conference: , pgs. 131 - 139 Author(s): Sascha Feistkorn, Bjorn Muhlan, Yves Schiegg, Daniel Algernon, Andreas Hasenstab

Ultrasonic monitoring of full-scale load experiments

Publication Date: 27 August 2018
Conference: , pgs. - Author(s): Ernst Niederleithinger

Nondestructive Testing of Composites

Publication Date: 1 August 2018
Publication: Materials Evaluation, Volume 76, Issue 8, pgs. 1048 - 1060
Author(s): Richard H. Bossi, Gary E. Georgeson

Evaluation of Aluminium Alloys Degradation in Aging Aircraft

Publication Date: 1 August 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 3, pgs. 156 - 166
Author(s): rest Ostash, Valentyn Uchanin, Oleksandr Semenets, Yuriy Holovatyuk, Leonid Kovalchuk, Valeriy Derech

Quantitative MFL Testing Technique for Strand Rope Based on a Small Number of Discontinuity Samples

Publication Date: 1 August 2018
Publication: Materials Evaluation, Volume 76, Issue 8, pgs. 1108 - 1117
Author(s): Shimin Pan, Donglai Zhang, Enchao Zhang

Microwave and Millimeter Wave Nondestructive Testing Principles

Publication Date: 1 August 2018
Publication: Materials Evaluation, Volume 76, Issue 8, pgs. 1063 - 1069
Author(s): Reza Zoughi

Feasibility of a New Moving Collimator for Industrial Backscatter Imaging

Publication Date: 1 August 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 3, pgs. 143 - 155
Author(s): Ahmed Balamesh, Mohammad Salloum, Samir Abdul-Majid

Analysis of Magnetic Flux Leakage Testing for Longitudinal Discontinuities in Sucker Rods

Publication Date: 1 August 2018
Publication: Materials Evaluation, Volume 76, Issue 8, pgs. 1099 - 1107
Author(s): Ou Zhang, Xueye Wei, Shuxin Yan, Wenyan Yang

Algorithms for the Magnetic Assessment of Proton Exchange Membrane (PEM) Fuel Cells

Publication Date: 1 August 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 3, pgs. 167 - 182
Author(s): James R. Claycomb

Blind Trial Validation of a Guided Wave Structural Health Monitoring System for Pipework

Publication Date: 1 August 2018
Publication: Materials Evaluation, Volume 76, Issue 8, pgs. 1118 - 1126
Author(s): Sebastian Heinlein, Peter Cawley, Thomas Vogt, Stephen Burch

Detection of Impact Damage in Carbon Fiber Composites Using an Electromagnetic Sensor

Publication Date: 1 August 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 3, pgs. 123 - 142
Author(s): Zhen Li, Arthur D. Haigh, Mohamed Nasr Saleh, Edward D. McCarthy, Constantinos Soutis, Andrew A.P. Gibson, Robin Sloan

Nondestructive Testing and Evaluation of Materials at the US Army Research Laboratory

Publication Date: 1 July 2018
Publication: Materials Evaluation, Volume 76, Issue 7, pgs. 959 - 965
Author(s): William H. Green, Jennifer M. Sietins, Christopher M. Kube

Nondestructive Testing Research and Development Efforts at Argonne National Laboratory: An Overview

Publication Date: 1 July 2018
Publication: Materials Evaluation, Volume 76, Issue 7, pgs. 911 - 920
Author(s): S. Bakhtiari, H.-T. Chien, A. Heifetz, T.W. Elmer

Nondestructive Testing Research and Capabilities at Pacific Northwest National Laboratory

Publication Date: 1 July 2018
Publication: Materials Evaluation, Volume 76, Issue 7, pgs. 949 - 958
Author(s): Ryan M. Meyer, Pradeep Ramuhalli, Steven R. Doctor, Susan L. Crawford, Matthew S. Prowant, Michael R. Larche, Aaron A. Diaz, Michael T. Anderson

Overview of the Nondestructive Evaluation Research Laboratory at the Federal Highway Administration

Publication Date: 1 July 2018
Publication: Materials Evaluation, Volume 76, Issue 7, pgs. 921 - 930
Author(s): Hoda Azari, Sadegh Shams

An Overview of Nondestructive Evaluation and Characterization at Lawrence Livermore National Laboratory

Publication Date: 1 July 2018
Publication: Materials Evaluation, Volume 76, Issue 7, pgs. 931 - 939
Author(s): Jolyon A. Browne, Harry E. Martz, Jr., Jr., Stephen G. Azevedo, Joseph W. Tringe

NASA's Nondestructive Evaluation Team: An Overview

Publication Date: 1 July 2018
Publication: Materials Evaluation, Volume 76, Issue 7, pgs. 941 - 947
Author(s): Eric Burke

Flaw Detection Capabilities in Aerospace with Eddy Current Array Technology

Publication Date: 5 June 2018
Conference: , pgs. 44 - 52 Author(s): Jesse Herrin, Nicholas Cardillo, Steve Timm, Tom Rohlfing

I-235 Bridge Load Test Combine with Acoustic Emission Monitoring

Publication Date: 5 June 2018
Conference: , pgs. 263 - 274 Author(s): Hang Zeng, Julie Hartell, Robert Emerson, Bruce Russell

Implementation of Special PA UT Techniques for Manufacturing Inspection of Friction Stir Welds

Publication Date: 5 June 2018
Conference: , pgs. 65 - 75 Author(s): Michael Monette, Dany Devos, Daniel Richard

Inverse Wave Field Extrapolation, the Next Generation of Ultrasonic Inspection

Publication Date: 5 June 2018
Conference: , pgs. 13 - 21 Author(s): Domenico Bellistri, Harvey Haines, Jeff Vinyard, Chase Collins

In-Line Inspection of Friction Stir Welds Using Laser Ultrasonics

Publication Date: 5 June 2018
Conference: , pgs. 22 - 31 Author(s): Bradley Bobbs, Max Wiedmann, Marvin Klein

New Tools in CIVA for Model Assisted Probability of Detection (MAPOD) to Support NDE Reliability Studies

Publication Date: 5 June 2018
Conference: , pgs. 32 - 43 Author(s): Fabrice Foucher, Roman Fernandez, Stephane Leberre, Pierre Calmon

Quality Classification of Adhesive Bonds in Composite Structures by Single-sided Air-coupled Ultrasonic Testing Using Linear Phased Array Probes

Publication Date: 5 June 2018
Conference: , pgs. 53 - 58 Author(s): Mario Kiel, Stefan Scheunemann, Maria Grotzner, Manuel Lucas, Andreas Muck

Camera Encoded Phased Array for Semi-Automated Inspection of Complex Composite Components

Publication Date: 5 June 2018
Conference: , pgs. 59 - 64 Author(s): Borja Lopez

Nondestructive Testing of Single Crystal Alloy by X-ray Diffraction

Publication Date: 5 June 2018
Conference: , pgs. 2 - 7 Author(s): Alexiane Arnaud, Edward Romero, Clement Remacha, David Murer, David Just, Vincent Revol, Henry Proudhon

Nondestructive Testing of Welding Defects in a Tubular-Type Transmission Tower using Magnetic Imaging with Magnetic Sensor Array

Publication Date: 1 June 2018
Publication: Materials Evaluation, Volume 76, Issue 6, pgs. 853 - 861
Author(s): Minhhuy Le, Juhyeon Park, Jungmin Kim, Gyejo Jung, Jinyi Lee

Detection and Classification of Discontinuities using Discrete Wavelet Transform and MFL Testing

Publication Date: 1 June 2018
Publication: Materials Evaluation, Volume 76, Issue 6, pgs. 706 - 715
Author(s): by Jackson Daniel, A. Abudhahir, K. Shankar, Soundra Pandi

Property Evaluation of 2Cr13 Tempered Steel Based on the Magnetic Memory Technique

Publication Date: 1 June 2018
Publication: Materials Evaluation, Volume 76, Issue 6, pgs. 845 - 852
Author(s): Long Feifei, Yang Yang, Wang Jianzeng, Dai Guang

Pulsed Eddy Current Testing

Publication Date: 1 June 2018
Publication: Materials Evaluation, Volume 76, Issue 6, pgs. 700 - 705
Author(s): Casper Wassink, Paul Crouzen

Dynamic Strain Measurements on a Complex Freeway Bridge

Publication Date: 1 May 2018
Publication: Materials Evaluation, Volume 76, Issue 5, pgs. 580 - 589
Author(s): Otto Henry Zinke

Feasibility Study for Improving the Image Characteristics in Digital Tomosynthesis (DTS) Using a Compressed-Sensing (Cs)-Based Pre-Deblurring Scheme

Publication Date: 1 May 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 2, pgs. 109 - 121
Author(s): Kyuseok Kim, Soyoung Park, Guna Kim, Hyosung Cho, Uikyu Je, Chulkyu Park, Hyunwoo Lim, Dongyeon Lee, Hunwoo Lee, Yeonok Park, Taeho Woo

Optimization of SAW-type Surface Wave Ultrasonic Sensors for Ultrasonic SHM

Publication Date: 1 May 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 2, pgs. 61 - 77
Author(s): R. Takpara, M. Duquennoy, M. Ouaftouh, C. Courtois, F. Jenot, M. Rguiti

Optimization of Periodic Permanent Magnet Configuration in Lorentz-Force EMATs

Publication Date: 1 May 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 2, pgs. 95 - 108
Author(s): Rishikesh Benegal, Fatemeh Karimi, Tobin Filleter, Anthony N. Sinclair

Adaptive Discretization for Computerized Tomography

Publication Date: 1 May 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 2, pgs. 78 - 94
Author(s): Snehlata Shakya, Anupam Saxena, Prabhat Munshi, Mayank Goswami

On the Use of Unmanned Aerial Vehicles in Nondestructive Evaluation of Civil Infrastructure

Publication Date: 1 May 2018
Publication: Materials Evaluation, Volume 76, Issue 5, pgs. 629 - 642
Author(s): Andrew Ellenberg, Antonios Kontsos, Ivan Bartoli

Full Matrix Capture and Total Focusing Method: The Next Evolution in Ultrasonic Testing

Publication Date: 1 May 2018
Publication: Materials Evaluation, Volume 76, Issue 5, pgs. 591 - 597
Author(s): Alan Caulder

Nondestructive Testing and Evaluation of Reinforced Concrete Bridge Decks: A Case Study

Publication Date: 1 May 2018
Publication: Materials Evaluation, Volume 76, Issue 5, pgs. 643 - 653
Author(s): Cherif Amer-Yahia, Todd Majidzadeh

Additive Manufacturing: The Rise of a Technology and the Need for Quality Control and Inspection Techniques

Publication Date: 2 April 2018
Publication: Materials Evaluation, Volume 76, Issue 4, pgs. 438 - 453
Author(s): Ahmed Arabi Hassen, Michel M. Kirka

3D Imaging for Nondestructive Testing – Part 2

Publication Date: 2 April 2018
Publication: The NDT Technician, Volume 17, Issue 2, pgs. 1 - 5
Author(s): Matt Bellis

Education, Training, and the Facts of Life

Publication Date: 2 April 2018
Publication: Materials Evaluation, Volume 76, Issue 4, pgs. 455 - 458
Author(s): John C. Duke, Jr., Jr.

Nondestructive Testing for Metal Parts Fabricated Using Powder-Based Additive Manufacturing

Publication Date: 2 April 2018
Publication: Materials Evaluation, Volume 76, Issue 4, pgs. 514 - 524
Author(s): Lucas W. Koester, Hossein Taheri, Timothy A. Bigelow, Peter C. Collins, Leonard J. Bond

Thermal Design of Hybrid Materials Produced via Ultrasonic Additive Manufacturing

Publication Date: 2 April 2018
Publication: Materials Evaluation, Volume 76, Issue 4, pgs. 503 - 513
Author(s): A. Plotkowski, R. Dinwiddie, S. S. Babu

Real-Time Characterization of Laser-Generated Melt Pools using Ultrasound

Publication Date: 2 April 2018
Publication: Materials Evaluation, Volume 76, Issue 4, pgs. 525 - 534
Author(s): Christopher M. Kube, Yi Shu, Adrian J. Lew, Daniel Galles

Experimental Nondestructive Characterization of an Aluminum Alloy Prepared by Powder-Bed Additive Manufacturing

Publication Date: 2 April 2018
Publication: Materials Evaluation, Volume 76, Issue 4, pgs. 489 - 502
Author(s): David B. Witkin, Scott Sitzman, Yong Kim, Elinore Adelman, Paul Adams, Neil Ives

Bridge Monitoring Utilizing Smart Portable Sensing System

Publication Date: 26 March 2018
Conference: , pgs. 66 - 74 Author(s): Ahmed Elhattab, Nasim Uddin, Eugene OBrien

A Common Operating Platform for Employing UAVs in Infrastructure Monitoring

Publication Date: 26 March 2018
Conference: , pgs. 221 - 226 Author(s): Niranjan Krishnan, Arjun Chiddarwar, Chandrasekar Venkatesh, Mehdi Norouzi, Arthur Helmicki, Victor Hunt, Kelly Cohen, Manish Kumar, Fred Judson

Characterization of Bonding Agent Durability in Fatigue Monitoring Applications Utilized in NDT

Publication Date: 26 March 2018
Conference: , pgs. 131 - 141 Author(s): Ryan J. Lane, John C. Duke, Jr.

Creating a Trend-setting Vision for NDE Technology and Driving the Change

Publication Date: 26 March 2018
Conference: , pgs. 203 - 211 Author(s): Ripudaman Ripi Singh

Construction Site Evaluation Employing 3D Models from UAV Imagery

Publication Date: 26 March 2018
Conference: , pgs. 227 - 233 Author(s): Chandrasekar Venkatesh, Aswin Balasubramaniam, Rumit Kumar, Bryan Brown, Mehdi Norouzi, Arthur Helmicki, Victor Hunt, Kelly Cohen, Manish Kumar, Fred Judson

Advanced Volumetric Phased Array Inspection for Un-Bored Steam Turbine Rotors

Publication Date: 26 March 2018
Conference: , pgs. 27 - 30 Author(s): Robert Bergman, Mauro Andres-Sacristan, Brian Marriner

Applications of a Compact NDT Shearography System Specially Designed for the Petroleum and Gas Industry

Publication Date: 26 March 2018
Conference: , pgs. 253 - 262 Author(s): Daniel P. Willemann, Fabio A.A. Silva, Mauro E. Benedet, Analucia V. Fantin, Armando Albertazzi, Sergio Damasceno Soares, Fabiana D.F. Martins

Wireless Structural Health Monitoring System Based on a Piezoelectric Fatigue Fuse

Publication Date: 26 March 2018
Conference: , pgs. 88 - 98 Author(s): Kyle Wetzlar, Brian Choules, Carlos Gamez

Passenger Vehicle Effect on the Truck Weight Calculations using B-WIM System

Publication Date: 26 March 2018
Conference: , pgs. 142 - 150 Author(s): Yahya M. Mohammed, Nasim Uddin

NDT Methods Applicable to Health Monitoring of ABC Closure Joints

Publication Date: 26 March 2018
Conference: , pgs. 75 - 87 Author(s): Saman Farhangdoust, Armin Mehrabi, Sayed SayedFerasAl Mosawi

Thickness and Density Prediction of Thin Asphalt Concrete Overlay Using GPR

Publication Date: 26 March 2018
Conference: , pgs. 20 - 26 Author(s): Shan Zhao, Siqi Wang, Imad L. Al-Qadi

Structural Health Monitoring of a Vertical Lift Bridge Using Vibration Data

Publication Date: 26 March 2018
Conference: , pgs. 191 - 202 Author(s): Vahid Shahsavari, Milad Mehrkash, Erin Bell

Smart Sound Processing for Residual Thickness Estimation using Guided Lamb Waves generated by EMAT

Publication Date: 26 March 2018
Conference: , pgs. 99 - 105 Author(s): Joaquin Garcia-Gomez, Marta Bautista-Duran, Roberto Gil-Pita, Antonio Romero-Camacho, Jesus Antonio Jimenez-Garrido, Victor Garcia-Benavides

SHM POD and POT

Publication Date: 26 March 2018
Conference: , pgs. 39 - 45 Author(s): John C. Duke, Jr., Marshal H. McCord, III, Ryan J. Lane

Seismically Damaged Structure Assessment Under Subsequent Extreme Events

Publication Date: 26 March 2018
Conference: , pgs. 275 - 279 Author(s): Heba Elsisi, Ahmed Elhattab, Nasim Uddin

Quantitative Ultrasonic Beam Profiles of Conventional Single-element Probes

Publication Date: 26 March 2018
Conference: , pgs. 54 - 65 Author(s): George Connolly, Mark Dennis, Myles Dunlap

Quantitative Phase-Space Nonlinear Ultrasound (PSNU)

Publication Date: 26 March 2018
Conference: , pgs. 31 - 38 Author(s): Ehsan Dehghan-Niri

Nondestructive Evaluation of Additively Manufactured Metal Components with an Eddy Current Technique

Publication Date: 26 March 2018
Conference: , pgs. 182 - 190 Author(s): Benjamin Schneider, Mohammad RashidBinMohammad Shoaib, Hossein Taheri, Lucas Koester, Timothy Bigelow, Leonard J Bond

Non-contact Surface Wave Testing Inversion by Artificial Neural Networks

Publication Date: 26 March 2018
Conference: , pgs. 2 - 11 Author(s): Hiba Al-Adhami, Nenad Gucunski

Utilizing Water Contact Angle Measurements to Predict Surface Preparedness for Dye Penetrant Application

Publication Date: 26 March 2018
Conference: , pgs. 128 - 130 Author(s): E.J. Kidd, B.A. Campbell, R.G. Dillingham

I-235 Bridge Load Test Combine with Acoustic Emission Monitoring

Publication Date: 26 March 2018
Conference: , pgs. 263 - 274 Author(s): Hang Zeng, Julie Hartell, Robert Emerson, Bruce Russell

Metasurface Based Surface Crack Sensor using Asymmetric Complementary Split Ring Resonator

Publication Date: 26 March 2018
Conference: , pgs. 12 - 19 Author(s): Salem A. Al-Otaibi, Manos M. Tentzeris

Electrical Resistance Tomography Based Sensing Skin with Internal Electrodes for Crack Detection in Large Structures: Preliminary Results Standard Difference Imaging Study

Publication Date: 26 March 2018
Conference: , pgs. 170 - 181 Author(s): Reza Rashetnia, Omar Khalaf Alla, Guillermo Gonzalez-Berrios, Aku Seppanen, Mohammad Pour Ghaz

Fast Ultrasonic Imaging with Total Focusing Method (TFM) for Inspection of Additively Manufactured Polymer Composite Component

Publication Date: 26 March 2018
Conference: , pgs. 212 - 220 Author(s): Hossein Taheri, Lucas Koester, Timothy Bigelow, Leonard J. Bond, Dominique Braconnier, Ewen Carcreff, Gavin Dao, Alan Caulder, Ahmed Arabi Hassen

Laser Ultrasonics for Remote Detection of Stress Corrosion Cracking in Harsh Environments

Publication Date: 26 March 2018
Conference: , pgs. 106 - 115 Author(s): Mostafa Hasanian, Sungho Choi, Cliff Lissenden

Field Verification for B-WIM System using Wireless Sensors

Publication Date: 26 March 2018
Conference: , pgs. 151 - 158 Author(s): Yahya M. Mohammed, Nasim Uddin

Wave Propagation in Damaged Composite Materials

Publication Date: 26 March 2018
Conference: , pgs. 46 - 53 Author(s): Ryan J. Lane, A. Gupta, J.C. Duke, Jr., Jr.

Infrared and High-definition Image-based Bridge Scanning Using UAVs without Traffic Control

Publication Date: 26 March 2018
Conference: , pgs. 116 - 127 Author(s): Shuhei Hiasa, Ph.D., Enes Karaaslan, F. NecatiCatbasPh.D. P.E.

Flexible Sensors for NDI of Curved Surfaces on Turbofan Components

Publication Date: 26 March 2018
Conference: , pgs. 243 - 252 Author(s): Evan Weststrate, Michael S. Squillante, Sergey Chekanov

My 27 Years of Innovations in NDE: From Inventor’s School to Development of a New NDE Method

Publication Date: 26 March 2018
Conference: , pgs. 234 - 242 Author(s): Sergey Vinogradov

NDT Women: Industry Veterans Discuss the Opportunities, Challenges, and Triumphs of the NDT Community

Publication Date: 1 March 2018
Publication: Materials Evaluation, Volume 76, Issue 3, pgs. 317 - 326
Author(s): Jill Ross

AE Source Localization in a Steel Plate with the Dispersive A0 Mode based on the Cross-Correlation Technique and Time Reversal Principle

Publication Date: 1 March 2018
Publication: Materials Evaluation, Volume 76, Issue 3, pgs. 371 - 382
Author(s): Zenghua Liu, Tuocan Dong, Qiuling Peng, Cunfu He, Qiufeng Li, Bin Wu

Reliability Investigation of Sizing Horizontal Planar Discontinuities Using a New Time of Flight Diffraction Technique

Publication Date: 1 March 2018
Publication: Materials Evaluation, Volume 76, Issue 3, pgs. 383 - 389
Author(s): B.S. Hayat Gheib, M.J. Ranjbar Naserabadi

Using Iterative Time Reversal for NDT Inspections on Composite Materials

Publication Date: 1 March 2018
Publication: Materials Evaluation, Volume 76, Issue 3, pgs. 310 - 315
Author(s): Daniel Richard

Using Ultrasonic and Finite Element for Residual Stress Evaluation of a Gas Transmission Pipeline

Publication Date: 1 February 2018
Publication: Materials Evaluation, Volume 76, Issue 2, pgs. 192 - 202
Author(s): Yashar Javadi, John A. Goldak, Kamran Imani Fooladi, Mohammadhossein Nimrouzi

A New Nomogram Proposal to Determine Concrete Compressive Strength by Combined Nondestructive Testing Methods

Publication Date: 1 February 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 1, pgs. 1 - 17
Author(s): Sinasi Bingola, Ahmet Cavdarb

Eddy Current Detection of Retained Austenite in Ni-Hard4 Cast Iron

Publication Date: 1 February 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 1, pgs. 38 - 47
Author(s): Amine Asadi, Majid Abbasi, Maryam Shamgholi

Using Magnetoresistive Sensors in Nondestructive Testing

Publication Date: 1 February 2018
Publication: Materials Evaluation, Volume 76, Issue 2, pgs. 144 - 154
Author(s): Chaofeng Ye, Anders Rosell, Lalita Udpa

Nondestructive Evaluation of Far-Side Corrosion Around a Rivet in a Multilayer Structure

Publication Date: 1 February 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 1, pgs. 18 - 37
Author(s): Jungmin Kima, Minhhuy Lea, Jinyi Leea, b, Sejin Kimb, Young-Ha Hwangc

Time-Delay Estimation of Ultrasonic Testing Signals by a Combination of Cross Correlation and Response Surface Method

Publication Date: 1 February 2018
Publication: Materials Evaluation, Volume 76, Issue 2, pgs. 184 - 191
Author(s): Arman Mokhtari

Ultrasonic Velocity and Attenuation in Epoxy Resin/Granite (Marble) Powder Composite

Publication Date: 1 February 2018
Publication: Research in Nondestructive Evaluation, Volume 29, Issue 1, pgs. 48 - 60
Author(s): Ali A.M. Yassenea, S. Faresb, A. Ashourb, M. Abd El-Rahmanb

Dichotomy of Fluorescent Penetrant Inspection Reliability Challenges versus Opportunities for Improved Performance and Capability

Publication Date: 2 January 2018
Publication: Materials Evaluation, Volume 76, Issue 1, pgs. 90 - 101
Author(s): Surendra Singh, Robert Hogan, Alonso Peralta

Alternating Current Field Measurement Testing

Publication Date: 2 January 2018
Publication: Materials Evaluation, Volume 76, Issue 1, pgs. 38 - 47
Author(s): Martin Lugg, Michael Smith

Nondestructive Testing of Heat Exchanger Tubes in Balance of Plant using Bobbin Coil and Bobbin-Type Integrated Hall Sensor Array

Publication Date: 2 January 2018
Publication: Materials Evaluation, Volume 76, Issue 1, pgs. 79 - 89
Author(s): Minhhuy Le, Sunbo Sim, Jungmin Kim, Jinyi Lee

3D Imaging for Nondestructive Testing

Publication Date: 2 January 2018
Publication: The NDT Technician, Volume 17, Issue 1, pgs. 4 - 8
Author(s): Matt Bellis