Article Article
Ultrasonic Wave Attenuation as a Parameter for Concrete Strength Prediction

Concrete is one of the most widely used construction materials for civil infrastructures. However, construction defects, wear and aging can deteriorate concrete. Thus, inspection and evaluation of concrete quality is an important task for engineers to ensure that the concrete structure adequately meets the standards for its design and function. The reason for this need for quality control is to prevent the possibility of catastrophic failure or malfunction of civil structures, which may cause high financial costs for repair and/or rehabilitation and, most importantly, it may cause human casualties. Non-destructive testing (NDT) methods are commonly used to inspect and evaluate concrete structures since they cause little to no damage to the structure going through examination. NDT methods are used to inspect new structures (for quality control) and existing structures (for integrity). In addition to being applied as the main testing method for the structure, NDT methods can also be applied as a preliminary testing method for destructive testing methods. Among these NDT methods include electrical and electromagnetic techniques, ultrasonic testing, infrared tomography, and surface hardness tests.

  • 1. ASTM C39- Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens.
  • 2. ASTM C597- Test Method for Pulse Velocity Through Concrete.
  • 3. ASTM C805- Standard Test Method for Rebound Number of Hardened Concrete.
  • 4. Aydin, A. ISRM Suggested method for determination of Schmidt hammer rebound hardness: Revised version. International Journal of Rock Mechanics and Mining Sciences, 46. pp. 627-634, 2009.
  • 5. Hannachi, S.and Guetteche, M. C. Application of the combined method for evaluating the compressive strength of concrete on site. Open Journal of Civil Engineering, Vol. 2, pp. 16-21, 2012.
  • 6. IAEA Guidebook on non-destructive testing of concrete structures, International Atomic Energy Agency, Vienna, 2002.
  • 7. Kewalramani, M.A. and Gupta, R., Concrete compressive strength prediction using ultrasonic pulse velocity through artificial neural networks, Automation in Construction, 2005.
  • 8. Kheder, G. F. A two stage procedure for assessment of in situ concrete strength using combined non-destructive esting. Material Structure, Vol. 32, pp. 410-417, 1999.
  • 9. Qasrawi, H. Concrete strength by combined non-destructive methods simply and reliably predicted. Cement and Concrete Research, No. 30, pp. 739-746, 2000. Table 1: Summary for the Six Regression Models


Usage Shares
Total Views
107 Page Views
Total Shares
0 Tweets
0 PDF Downloads
0 Facebook Shares
Total Usage