Article Article
NDE Engineering: E is for Evaluation

As the field of nondestructive testing has become increasingly more science based the acronym NDE, although possibly abbreviating nondestructive examination or nondestructive evaluation, has become an umbrella term for various aspects of the process of nondestructive evaluation which is “To NONDESTRUCTIVELY EVALUATE (NDE) an object, one must describe the imperfections, and assess the severity, with respect to expected service conditions, without reducing serviceability.” For many situations … assessing the severity… is a matter of comparing some measure of a flaw with respect to a predetermined accept/reject criteria and those performing the examinations and inspections have focused more on … describing the imperfections. Unfortunately these two aspects of the NDE process also tend to fall on opposite sides of the line between technician and engineer. While certainly there are aspects associated with the inspection side which might demand consideration by an engineer for the most part these are an outcome of the evaluation side. Unfortunately because the emphasis of many working in inspection, research, development and engineering has been on the inspection side issues, where those issues where NDT expertise are needed, on the evaluation side have gone unaddressed.

  • N. E. Dowling, “Mechanical Behavior of Materials,” 4th edition, Prentice-Hall, Upper Saddle River, 2012.
  • A. F. Grandt, Jr. “Fundamentals of Structural Integrity,” John Wiley, Hoboken , 2003.
  • D.E. Bray and R.K. Stanley, “Nondestructive Evaluation,” Revised edition, CRC Press, Boca Raton, 1996.
  • L. Christodoulou and J. M. Larsen, Using Materials Prognosis to Maximize the Utilization Potential of Complex Mechanical Systems, Journal of Metals, Vol. 56, No. 3, pp. 15-19, 2004.
  • E.A. Steigerwald, “Crack Toughness Measurements of High-Strength Steels,” Review of Developments in Plane Strain Fracture Toughness Testing, W.F. Brown, Jr., ed., ASTM STP 463, Am. Soc. for Testing and Materials, West Conshohocken, PA, pp. 102-1123, 1970.
  • H.J. Grover, Fatigue of Aircraft Structures, NAVAIR 01-1A-13, Naval Air Systems Command, Department of the Navy, Washington, DC, 1966.
  • P.C. Paris et al. “Extensive Study of Low Fatigue Crack Growth Rates in A533 and A508 Steels,” Stress Analysis and Growth of Cracks, Proceedings of the 1971 National Symposium on Fracture Mechanics, Part I, ASTM STP 513, Am. So. For Testing and Materials, West Conshohocken, PA, pp. 141-176, 1972.
Usage Shares
Total Views
60 Page Views
Total Shares
0 Tweets
0 PDF Downloads
0 Facebook Shares
Total Usage