Publication: Publication Date: 1 May 2014Testing Method:

The mass point leak rate technique is often the methodology of choice for quantifying leak rates as it uses simple elementary measurements, applies to gas systems of low mass, proves effective for low leak rates, and does not rely on test-gas conversions. In this methodology, a number of instantaneous mass measurements are calculated through samples of volume, pressure, gas composition, and temperature measurements over time. A regression analysis of the corresponding mass-time sample set yields the leak rate of the system. A detailed uncertainty analysis is paramount for a complete, experimental characterization of the leak rate and previously was not fully implemented in the mass point leak rate method. Recent advancements in regression uncertainty analysis by propagation of errors afford the ability to quantify the uncertainty with estimates of covariance in the regression results. The mass point leak rate technique with the associated detailed measurement uncertainty analysis offers the ability to quantify both the leak rate and the uncertainty associated with the leak rate value. Detailed herein is the development of the methodology and a detailed uncertainty analysis that includes both precision (repeatability) and bias (systematic) error. Alternative leak rate methods are also discussed for comparison purposes. An example in the methodology is presented.

References

1. P. O. Moore, C. N. Jackson, Jr., and C. N. Sherlock. (Ed.) Nondestructive Testing Handbook,
Leak Testing. American Society for Nondestructive Testing, Inc., Columbus, Ohio (1998).
2. W. A. Fuller. Measurement Error Models. John Wiley & Sons, Inc., New York (1987).
3. American National Standard of Calibration—U.S. Guide to Expression of Uncertainty in
Measurement. American National Standards Institute, NCSL International, Boulder, Colorado
(1997).
4. N. G. Garafolo, M. B. Bastrzyk, and C. C. Daniels. Proceedings of the 48th AIAA Aerospace
Sciences Meeting AIAA 2010–1440 (2010).
5. Introduction to Helium Mass Spectrometer Leak Detection. (1995).
6. J. L. Lewis, M. B. Carroll, R. H. Morales, D. L. Thang, and National Aeronautics and Space
Administration, Washington, D.C. United States of America Patent No. 6:354–540, March 12,
2002.
7. C. C. Daniels, H. de Groh III, P. H. Dunlap, J. R. Finkbeiner, B. M. Steinetz, M. B. Bastrzyk,
J. J. Oswald, B. A. Banks, J. A. Dever, S. K. Miller, and D. L. Waters. Proceedings of the
43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Cincinnati, OH, July 8–11,
2007, AIAA 2007–5741 (2007).
8. I. M. Smith, C. C. Daniels, P. H. Dunlap, and B. M. Steinetz. Proceedings of the 44th
AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Hartford, CT, July 21–23, 2008,
AIAA 2008–4713 (2008).
9. J. L. Wasowski, N. Penney, N. G. Garafolo, and C. C. Daniels. Proceedings of the 45th
AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit AIAA, pp. 2009–5320 (2009).
10. C. C. Daniels, N. G. Garafolo, M. B. Bastrzyk, and I. M. Smith. Proceedings of the 45th
AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit AIAA, pp. 2009–5250 (2009).
11. N. G. Garafolo and C. C. Daniels. Proceedings of the ASME 2009 Fluids Engineering Division
Summer Meeting, No. FEDSM2009-78067, ASME, Vail, CO, August 2–5, 2009.
12. C. C. Daniels and N. G. Garafolo. Nondestructive Testing and Evaluation. 29:14-–28 (2014).
13. C. C. Daniels and N. G. Garafolo. JSNDI/ASNT Fourth Japan–U.S. Symposium on Emerging
NDE Capabilities for a Safer World, The Japanese Society for Non-Destructive Inspection, Maui,
Hawaii, June 7–11, 2010, pp. 375–381.
14. S. C. Chapra and R. P. Canale. Numerical Methods for Engineers. The McGraw-Hill Companies,
Inc., New York, NY (2002).
15. H. W. Coleman and W. G. Steele, Jr. Experimentation and Uncertainty Analysis for Engineers.
John Wiley & Sons, Inc., New York, NY (1999).
16. K. K. Brown, H. W. Coleman, W. G. Steele, and R. P. Taylor. AIAA Journal 34:1013–1018
(1996).
17. P. R. Bevington, and D. K. Robinson. Data Reduction and Error Analysis for the Physical Sciences. The McGraw-Hill Companies, Inc., New York, NY (2003).
18. D. C. Montgomery, E. A. Peck, and G. G. Vining. Introduction to Linear Regression Analysis.
John Wiley & Sons, Inc., New York, NY (2006).
19. A. Gelman, and J. Hill. Data Analysis Using Regression and Multilevel/Hierarchical Models.
Cambridge University Press, New York, NY (2007).
20. R. S. Figliola, and D. E. Beasley. Theory and Design for Mechanical Measurements. John
Wiley & Sons, Inc., New York, NY (2000).
21. N. R. Draper and H. Smith. Applied Regression Analysis. John Wiley & Sons, Inc., New York
(1998).
22. J. C. Tannehill, D. A. Anderson, and R. H. Pletcher. Computational Fluid Mechanics and Heat
Transfer. Taylor & Francis, Philadelphia, Pennsylvania (1984).
23. K. K. Brown. Ph.D. dissertation, The University of Alabama in Huntsville, Huntsville, Alabama,
1996.
24. K. K. Brown, H. W. Coleman, and W. G. Steele, Jr. Journal of Fluids Engineering 120:445–456
(1998).

Metrics

Usage | Shares |
---|---|

Total Views 102 Page Views |
Total Shares 0 Tweets |

102 0 PDF Downloads |
0 0 Facebook Shares |

Total Usage | |

102 |