This paper highlights work done at the Pennsylvania State University on guided wave mechanics and testing associated with aircraft, composite materials and pipelines.
Barshinger, J.N. and J.L. Rose, “Guided Wave Propagation in
an Elastic Hollow Cylinder Coated with a Viscoelastic
Material,” IEEE Transactions on Ultrasonics, Ferroelectrics
and Frequency Control, Vol. 51, 2004, pp. 1547–1556.
Breon, L., J.K. Van Velsor and J.L. Rose, “Guided Wave
Damage Detection Tomography for Structural Health Monitoring
in Critical Zones of Pipelines,” Materials Evaluation,
Vol. 65, 2007, pp. 1215–1219.
Ditri, J.J. and J.L. Rose, “Excitation of Guided Elastic Wave
Modes in Hollow Cylinders by Applied Surface Tractions,”
Journal of Applied Physics, Vol. 72, 1992, pp. 2589–2597.
Ditri, J.J. and J.L. Rose, “Excitation of Guided Waves in
Generally Anisotropic Layers Using Finite Sources,” ASME
Journal of Applied Mechanics, Vol. 61, 1994, pp. 330–338.
Ditri, J.J., J.L., Rose and A. Pilarski, “Generation of Guided
Waves in Hollow Cylinders by Wedge and Comb Type Transducers,”
Review of Progress in Quantitative Nondestructive
Evaluation, D.O. Thompson and D.E. Chimenti, eds.,
Melville, New York, AIP, Vol. 12 A, 1992, pp. 211–218.
Gao, H. and J.L. Rose, “Goodness Dispersion Curves from
Ultrasonic Guided Wave Based SHM: A Sample Problem in
Corrosion Monitoring,” The Aeronautical Journal of the Royal
Aeronautical Society, Vol. 114, 2010, pp. 49–56.
Gao, H. and J.L. Rose, “Ice Detection and Classification on
an Aircraft Wing with Ultrasonic Shear Horizontal Guided
Waves,” IEEE Transactions on Ultrasonics, Ferroelectrics,
and Frequency Control, Vol. 56, 2009, pp. 334–344.
Gao, H., Y. Shi and J.L. Rose “Guided Wave Tomography on
an Aircraft Wing with Leave in Place Sensors,” Review of
Progress in Quantitative Nondestructive Evaluation, D.O.
Thompson and D.E. Chimenti, eds., Melville, New York, AIP,
Vol. 24B, 2005, pp. 1788–1794.
Hay, T.R., W. Luo, J.L. Rose and T. Hayashi “Rapid Inspection
of Composite Skin-Honeycomb Core Structures with Ultrasonic
Guided Waves,” Journal of Composite Materials, Vol.
37, 2003, pp. 929–939.
Hayashi, T. and J.L. Rose, “Guided Wave Simulation and
Visualization by a Semianalytical Finite Element Method,”
Materials Evaluation, Vol. 60, 2002, pp. 75–79.
Li, J. and J.L. Rose, “Excitation and Propagation of Nonaxisymmetric
Guided Waves in a Hollow Cylinder,” Journal
of the Acoustical Society of America, Vol. 109, 2001, pp.
457–464.
Li, J., and J.L. Rose, “Implementing Guided Wave Mode
Control by Use of a Phased Transducer Array,” IEEE Transactions
on Ultrasonics, Ferroelectrics and Frequency Control,
Vol. 49, 2001, pp. 1720–1729.
Luo, W. and J.L. Rose, “Phased Array Focusing with Guided
Waves in a Viscoelastic Coated Hollow Cylinder,” Journal of
the Acoustical Society of America, Vol. 121, 2006, pp.
1945–1955.
Mu, J. and J.L. Rose, “Guided Wave Propagation and Mode
Differentiation in Hollow Cylinders with Viscoelastic
Coatings,” Journal of the Acoustical Society of America,
Vol.124, 2008, pp. 866–874.
Mu, J. and J.L. Rose, “Long Range Pipe Imaging with a
Guided Wave Focal Scan,” Materials Evaluation, Vol.66,
2008, pp. 663–666.
Pilarski, A. and J.L. Rose, “A Transverse-Wave Ultrasonic
Oblique-Incidence Technique for Interfacial Weakness
Detection in Adhesive Bonds,” Journal of Applied Physics,
Vol. 63, 1988, pp. 300–307.
Rose, J.L. and L. Soley, “Ultrasonic Guided Waves for
Anomaly Detection in Aircraft Components,” Materials Evaluation,
Vol. 58, 2000, pp. 1080–1086.
Rose, J.L., F. Yan and Y. Zhu, “Ultrasonic Guided Wave
Modal Analysis Technique (UMAT) for Defect Reflection –
SEM,” IMAC XXVIII Proceedings, Milwaukee, Wisconsin, The
Printhouse, 2010, compact disk.
Rose, J.L., J.J. Ditri and A. Pilarski “Wave Mechanics in
Acousto-Ultrasonic Nondestructive Evaluation,” Journal of
Acoustic Emission, Vol. 12, 1994, pp. 23–26.
Rose, J.L., J.J. Ditri, A. Pilarski, K.M. Rajana and F.T. Carr, “A
Guided Wave Inspection Technique for Nuclear Steam
Generator Tubing,” NDT&E, Vol. 27, 1993, pp. 307–310.
Rose, J.L., K.M. Rajana and F.T. Carr, “Ultrasonic Guided
Wave Inspection Concepts for Steam Generator Tubing,”
Materials Evaluation, Vol.52, 1994, pp. 307–311.
Rose, J.L., K.M. Rajana and M.K.T. Hansch, “Ultrasonic
Guided Waves for NDE of Adhesively Bonded Structures,”
Journal of Adhesion, Vol. 50, 1995, pp. 71–82.
Rose, J.L., Ultrasonic Waves in Solid Media, Cambridge,
England, Cambridge University Press, 1999.
Rose, J.L., Z. Sun, P.J. Mudge and M.J. Amioli, “Guided Wave
Flexural Mode Tuning and Focusing for Pipe Testing,” Materials
Evaluation, Vol. 61, 2002, pp. 162–167.
Shin, H.J. and J.L. Rose, “Guided Wave Tuning Principles for
Defect Detection in Tubing,” Journal of Nondestructive Evaluation,
Vol. 17, 1998, pp. 27–36.
Sun, Z., L. Zhang and J.L. Rose, “Flexural Torsional Guided
Wave Mechanics and Focusing in Pipe,” Journal of Pressure
Vessel Technology, Transactions of ASME, Vol. 127, 2005,
pp. 471–478.
Yan, F. and J.L. Rose, “Guided Wave Phased Array Beam
Steering in Composite Plates,” Proceedings of SPIE, Vol.
6532:65320G, 2007.
Yan, F. and J.L. Rose, “Time Delay Comb Transducers for
Aircraft Inspection,” The Aeronautical Journal of the Royal
Aeronautical Society, Vol. 113, 2009, pp. 417–427.
Zhang, L., J.L. Rose and B.J. Gavigan, “Natural Focusing
Inspection for Pipes by Frequency Tuning,” Review of
Progress in Quantitative Nondestructive Evaluation, D.O.
Thompson and D.E. Chimenti, eds., Melville, New York, AIP,
2005, Vol. 24B, pp. 1557–1562.
Zhu, W. and J.L. Rose, “Lamb Wave Generation and Reception
with Time-Delay Periodic Linear Arrays: A BEM Simulation
and Experimental Study,” IEEE Transactions on
Ultrasonics, Ferroelectrics and Frequency Control, Vol. 46,
1999, pp. 654–664.
Zhu, Y., J.L. Palacios, J.L. Rose and E.C. Smith, “De-icing of Multilayer
Composite Plates Using Ultrasonic Guided Waves,” Collection
of Technical Papers — 49th AIAA/ASME/ASCE/AHS/ASC,
Structural Dynamics and Materials Conference, Schaumberg,
Illinois, 7–10 April 2008.