Article Periodicals » Materials Evaluation » Article
Improving Guided Wave Testing of Pipelines with Mechanical Attachments

Long-range guided wave testing techniques are widely used to detect corrosion under insulation in refinery piping systems. Along the piping systems, many mechanical features, such as clamps, hangers and pipe supports, are found that are in direct contact with the pipe outer diameter surface. Signals produced from the interactions with these features can disrupt the guided wave propagation, increasing background noise level, masking discontinuity signals, reducing the test range, and, if the presence of such a mechanical feature is unknown to the tester, leading to misinterpretation of signals. This paper examines the effects of mechanical clamps on the guided wave propagation and their dependence on the guided wave frequency. The effects are highly sensitive to the wave frequency and are greatly reduced at high frequencies. To show the degree of the sensitivity to wave frequency and reduction that can be achieved using high frequency guided waves, experimental data taken from laboratory samples with a mechanical clamp over frequencies of up to 200 kHz are presented. In long-range guided wave testing of piping systems with mechanical attachments, a marked improvement in test results can be gained by using a high frequency guided wave (above 100 kHz in torsional wave mode). Examples of actual field data are also presented that demonstrate a markedly improved test result and the need to employ high frequency waves for testing of refinery piping systems.

References
Cawley, P., M.J.S. Lowe, D.N. Alleyne, B. Pavlakovic and P. Wilcox, “Practical Long Range Guided Wave Testing: Applications to Pipes and Rail,” Materials Evaluation, Vol. 61, 2003, pp. 66-74. Cheng, J.W., S.K. Yang, and B.H. Li, “Guided Wave Attenuation in Clamp Support Mounted Pipelines,” Materials Evaluation, Vol. 65, 2007, pp. 317-322. de Silva, C.W., Vibration: Fundamentals and Practices, second edition, Boca Raton, Florida, CRC Press, 2007, pp. 130-131. Kinsler, L.E. and A.R. Frey, Fundamentals of Acoustics, second edition, New York, John and Wiley & Sons, 1962, pp. 202-205 . Krautkramer, J. and H. Krautkramer, Ultrasonic Testing of Materials, fourth edition, New York, Springer-Verlag, 1990, pp. 23-24 . Kwun, H. and K.A. Bartels, “Experimental Observation of Elastic Wave Dispersion in Bounded Solids of Various Configurations,” Journal of the Acoustical Society of America, Vol. 99, 1996, pp. 962-968. Kwun, H. and A. Crouch, “Guided Wave Fills Inspection Gap,” Pipeline and Gas Technology, 2006, pp. 28-31. Kwun, H., S.Y. Kim and G.M. Light, “The Magnetostrictive Sensor Technology for Long Range Guided Wave Testing and Monitoring of Structures,” Materials Evaluation, Vol. 61, 2003, pp. 80-84. Kwun, H., E.V. Mader and K.J. Krzywosz, “Guided Wave Inspection of Nuclear Fuel Rods,” presented at the 7th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Components, May 12–14, 2009, Yokohama, Japan. Rose, J.L., Ultrasonic Waves in Solid Media, Cambridge University Press, 1999. Rose, J.L., J. Mu, J. Hua, R. Royer, and S. Kenefick, “Guided Wave Testing of Buried Pipe,” Materials Evaluation, Vol. 67, 2009, pp. 1387. Yang, S.K., P.H. Lee, and J.W. Cheng, “Effect of Welded Pipe Support Brackets on Torsional Guided Wave Propagation,” Materials Evaluation, Vol. 67, 2009, pp. 935-944.
Metrics
Usage Shares
Total Views
55 Page Views
Total Shares
0 Tweets
55
0 PDF Downloads
0
0 Facebook Shares
Total Usage
55