This paper focuses on optical fiber sensors, which are well adapted for embedding in composite materials made by pultrusion. The first part reviewed local measurement techniques, and the second part described technologies that allow distributed measurements
Bhatia, V., K. Murphy, R. Claus, T. Tran and J. Greene,
“Recent Developments in Optical-Fiber-Based Extrinsic
Fabry-Pérot Interferometric Strain Sensing Technology,”
Smart Materials and Structures, Vol. 4, 1995, pp. 246–251.
Chapeleau, X., D. Leduc, C. Lupi, R. Le Ny, M. Douay, P. Niay
and C. Boisrobert, “Experimental Synthesis of Fiber Bragg
Gratings Using Optical Low Coherence Reflectometry,”
Applied Physics Letters, Vol. 82(24), 2003, pp. 4227–4229.
Drissi-Habti, M., L. Gaillet, C. Tessier and V. Le Cam,
“Acoustic Emission Technique as a Tool for Structural Health
Monitoring of Bridge Cables,” Proceedings of NDE/NDT for
Highways and Bridges: Structural Materials Technology
(SMT), Columbus, Ohio, ASNT, 2008, pp. 169–174.
Gandhi, M. and B. Thompson, Smart Materials and Structures,
London, Chapman & Hall, 1992.
Glisic, B., D. Posenato, F. Persson, F. Myrvoll, M. Enckell and
D. Inaudi, “Integrity Monitoring of Old Steel Bridge Using
Fiber Optic Distributed Sensors Based on Brillouin Scattering,”
Third International Conference on Structural Health
Monitoring of Intelligent Infrastructure, Vancouver, British
Columbia, Canada, 13–16 November 2007.
Grattan K. and T. Sun, “Fiber Optic Sensor Technology: An
Overview,” Sensors and Actuators A: Physical, Vol. 82(1–3),
2000, pp. 40–61.
Hotate, K. and T. Hasegawa, “Measurement of Brillouin
Gain Spectrum Distribution along an Optical Fiber Using a
Correlation-Based Technique — Proposal, Experiment and
Simulation,” IEICE Transactions on Electronics, Vol. E83-C,
2000, pp. 405–412.
Housner, G., L. Bergman, T. Caughey, A. Chassiakos, R. Claus and
S. Masri, “Structural Control: Past, Present and Future,” Journal of
Engineering Mechanics, Vol. 123, 1997, pp. 897–971.
Hunt, J., “A New Way to Monitor Using Fibre Optics,” Sensor
Review, Vol. 28, 2008, pp. 199–204.
Jones, J. “Review of Fibre Sensor Techniques for Temperature-
Strain Discrimination,” Proceedings of International
Conference on Optical Fiber Sensors OFS-12, Washington,
DC, Optical Society of America, 1997, pp. 36–39.
Karalekas, D., J. Cugnoni and J. Botsis, “Monitoring of
Process Induced Strains in a Single Fibre Composite Using
FBG Sensor: A Methodological Study,” Composites Part A:
Applied Science and Manufacturing, Vol. 39, 2008, pp.
Kashyap, R., Fiber Bragg Gratings, Optics and Photonics,
London, Academic Press, 1999.
Kersey, A., D. Jackson and M. Corke, “A Simple Fiber Fabry-Pérot
Sensor,” Optics Communications, Vol. 45, 1983, pp. 71–74.
Kim, D.-H., B.-Y. Koo, C.-G. Kim and C.-S. Hong, “Damage
Detection of Composite Structures Using a Stabilized
Extrinsic Fabry-Pérot Interferometric Sensor System,” Smart
Materials and Structures, Vol. 13, 2004, pp. 593–598.
Lekakou, C., S. Cook, Y. Deng, T.W. Ang and G.T. Reed,
“Optical Fibre Sensor for Monitoring Flow and Resin Curing
in Composites Manufacturing,” Composites Part A: Applied
Science and Manufacturing, Vol. 37, 2006, pp. 934–938.
Mason, B., T. Valis and D. Hog, “Commercialization of Fiber-
Optic Strain Gauge Systems,” Proceedings of SPIE — Fiber
Optic and Laser Sensors X, Vol. 1795, 1992, pp. 8–11.
Mizuno, Y., W. Zou, Z. He and K. Hotate, “Proposal of Brillouin
Optical Correlation-Domain Reflectometry (BOCDR),”
Optics Express, Vol. 16, 2008, pp. 12148–12153.
Murphy, K., M. Gunther, A. Wang, R. Claus and A. Vengsarkar,
“Extrinsic Fabry-Pérot Optical Fiber Sensor,” Proceedings of
International Conference on Optical Fiber Sensors OFS-8, Washington,
DC, Optical Society of America, 1992, pp. 193–196.
Rao, Y.-J., “In-Fibre Bragg Grating Sensors,” Measurement
Science and Technology, Vol. 8, 1997, pp. 355–375.
Schultheis, L., H. Amstutz and M. Kaufmann, “Fiber-Optic
Temperature Sensing with Ultrathin Silicon Etalons,” Optical
Letters, Vol. 13, 1988, pp. 782–784.
Soller, B., M. Wolfe and M. Froggatt, “Polarization Resolved
Measurement of Rayleigh Backscatter in Fiber-Optic Components,”
Technical Digest of Fiber Communications Conference
(OFC), Washington, DC, Optical Society of America,
2005, paper NWD3.
Takeda, S., S. Minakuchi, Y. Okabe and N. Takeda, “Delamination
Monitoring of Laminated Composites Subjected to
Low-Velocity Impact Using Small-Diameter FBG Sensors,”
Composites Part A: Applied Science and Manufacturing, Vol.
36, 2005, pp. 903–908.
Thévenaz, L., “Review and Progress on Distributed Fibre
Sensing,” OSA Technical Digest, Washington DC, Optical
Society of America, 2006, paper ThC1.
Wang, A., H. Xiao, J. Wang, Z. Wang, W. Zhao and R.G. May,
“Self-Calibrated Interferometric-Intensity-Based Optical Fiber
Sensors,” Journal of Lightwave Technology, Vol. 19, 2001,
Yasue, N., H. Naruse, J.I. Masuda, H. Kino, T. Nakamura and
T. Yamaura, “Concrete Pipe Strain Measurement Using
Optical Fiber Sensor,” IEICE Transactions on Electronics, Vol.
E83-C(3), 2000, pp. 468–474.
Zhao, Y. and Y. Liao, “Discrimination Methods and Demodulation
Techniques for Fibre Bragg Grating Sensor,” Optical
Lasers Engineering, Vol. 41, 2004, pp. 1–18.