Article Periodicals » Materials Evaluation » Article
A Proposal for an Element Division Determination Technique for Finite Element Wave Propagation Analysis

This study proposed an element size selection technique, named the impact meshing technique, for a finite element wave propagation analysis model, which was characterized by determination of element division of the model with strain energy in the whole model and by static analysis (dynamic analysis in a single time-step) with boundary conditions, which are a maximum change of displacement in a time increment and inertial (impact) force caused by the displacement change. In this paper, examples of application of the impact meshing technique for the 3D ultrasonic wave propagation problem in elastic solids and the 2D acoustic wave propagation problem in fluid were described. Furthermore, the advantage of the impact meshing technique was represented by reduction of calculation time for determination of element subdivision compared with the conventional procedure with a dynamic transient analysis.

References
Galdos, A., H. Okuda and G. Yagawa, “Finite Element Simulation of Ultrasonic Wave Propagation in Pipe and Pressure Vessel Walls,” Finite Element Analysis and Design, Vol. 7, No. 1, 1990, pp. 1-13. Guan, J., Z. Shen, X. Ni, J. Lu, J. Wang and B. Xu, “Numerical Simulation of the Ultrasonic Waves Generated by Ring-shaped Laser Illumination Patterns,” Optics & Laser Technology, Vol. 39, No. 6, 2007, pp. 1281-1287. Harumi, K., “Computer Simulation of Ultrasonics in a Solid,” NDT International, Vol. 19, No. 5, 1986, pp. 315-332. Ito, T., K. Kawashima, K. Mori and R. Omote, “FEM Analysis of Leaky Surface Wave Propagation Excited by a Line-focused Transducer,” Transactions of the Japan Society of Mechanical Engineers, Vol. 65, No. 631, 1999, pp. 589-596, (in Japanese). Jaleel, K. M. A., N. N. Kishore and V. Sundararajan, “Finite-element Simulation of Elastic Wave Propagation in Orthotropic Composite Materials,” Materials Evaluation, Vol. 51, No. 7, 1993, pp. 830-838. Ju, S. H. and Y. M. Wang, “Time-dependent Absorbing Boundary Conditions for Elastic Wave Propagation,” International Journal for Numerical Methods in Engineering, Vol. 50, No. 9, 2001, pp. 2159-2174. Lin, S., T. Ito and K. Kawashima, “FEM Analysis of Circumferential Ultrasonic Wave Propagation in Pipes and Sizing of Axial Defects,” Transactions of the Japan Society of Mechanical Engineers, Vol. 67, No. 653, 2001, pp. 36-42, (in Japanese). Liou, M. C. and C. Miki, “A Study on Generating Mechanism of Ultrasonic Tip Echo Reflected from the Sharp Tips of a Flaw,” Journal of the Japan Society of Civil Engineering, Vol. 525, No. I–33, 1995, pp. 109-116, (in Japanese). Mirkhani, K., C. Chaggares, C. Masterson, M. Jastrzebski, T. Dusatko, A. Sinclair, R. J. Shapoorabadi, A. Konrad and M. Papini, “Optimal Design of EMAT Transmitters,” NDT & E International, Vol. 37, No. 3, 2004, pp. 181-193. Moser, F., L. J. Jacobs and J. Qu, “Application of Finite Element Methods to Study Transient Wave Propagation in Elastic Wave Guides,” Review of Progress in Quantitative Nondestructive Evaluation, Vol. 17, 1998, pp. 161-167. MSC. Software, Marc, http://www.mscsoftware.com/Contents /Products/CAE-Tools/Marc-And-Mentat.aspx, April 2010. Nair, A. K. and P. R. Heyliger, “Elastic Waves in Combinatorial Material Libraries,” Wave Motion, Vol. 43, No. 7, 2006, pp. 529-543. Ohtsuki, A. and K. Harumi, “Mechanism of Wave Propagation Around Large Cavern Due to SV Wave,” Journal of the Japan Society of Civil Engineering, Vol. 339, 1983, pp. 227-230, (in Japanese). Zhang, J. and D. J. Verschuur, “Elastic Wave Propagation in Heterogeneous Anisotropic Media using the Lumped Finite-element Method,“ Geophysics, Vol. 67 No. 2, 2002, pp. 625-638.
Metrics
Usage Shares
Total Views
9 Page Views
Total Shares
0 Tweets
9
0 PDF Downloads
0
0 Facebook Shares
Total Usage
9