Article Article
Health Monitoring Approach for Adhesively Bonded Joints

This study deals with the health monitoring of fiber-reinforced composite panels using ultrasonic guided waves and a class of algorithms originally tested in the vibration (lower-acoustic) domain based on attractor based state space analysis involving auto- or cross-prediction methods. The examined components are representative of the wing skin-to-spar joints of unmanned aerial vehicles. The guided wave propagation problem is first studied analytically by a model that accounts for all relevant temperature-dependent parameters of a pitch/catch system on a carbon-reinforced epoxy composite plate. Elements included in the model are actuator/plate and plate/sensor interactions through shear lag behavior, piezoelectric and dielectric permittivity properties of the transducers and Lamb wave dispersion properties of the substrate plate. The model is used to predict the S0 response spectra in the composite plate for the temperature range of 233 to 313 K, which is typical of normal aircraft operational variability. Different types of bond discontinuities that include various disbond sizes and poorly cured adhesive are then examined experimentally over the range of temperatures using time series prediction algorithms combined with ultrasonic chaotic excitations. An active excitation signal is imparted to the structure through a macrofiber composite (MFC) patch on one side of the bonded joint and sensed using an equivalent MFC patch on the opposite side of the joint. There is an MFC actuator/sensor pair for each bond condition to be identified.

Bartoli, I., A. Marzani, F. Lanza di Scalea and E. Viola, “Modeling Wave Propagation in Damped Waveguides of Arbitrary Cross-section,” Journal of Sound and Vibration, Vol. 295, 2006, pp. 685–707. Brockwell, P.J. and R.A. Davis, Time Series: Theory and Methods, New York, Springer, 1991. Chamis, C.C., “Simplified Composite Micromechanics Equations for Hygral, Thermal, and Mechanical Properties,” SAMPE Quarterly, Vol. 15, 1984, pp. 14–23. Crawley, E.F. and J. de Luis, “Use of Piezoelectric Actuators as Elements of Intelligent Structures,” AIAA Journal, Vol. 25, 1987, pp. 1373–1385. Fasel, T.R., M.D. Todd and G. Park, “Piezoelectric Active Sensing Using Chaotic Excitations and State Space Reconstruction,” Proceedings of the SPIE 10th Annual International Symposium on NDE for Health Monitoring and Diagnostics, San Diego, Vol. 5768, 2005, pp. 253-263. Fasel, T.R., M.D. Todd and G. Park, “Active Chaotic Excitation for Bolted Joint Monitoring,” Proceedings of the SPIE 11th Annual International Symposium on NDE for Health Monitoring and Diagnostics, San Diego, Vol. 6174, 2006, pp. 61741S-1–61741S-8. Fasel, T.R., M.D. Todd and G. Park, “Damage State Evaluation of Adhesive Composite Joints Using Chaotic Ultrasonic Waves,” Proceedings of the SPIE 14th Annual International Symposium on NDE for Health Monitoring and Diagnostics, San Diego, Vol. 7295, 2009, pp. 729511-1–729511-9. Giurgiutiu, V., “Tuned Lamb Wave Excitation and Detection with Piezoelectric Wafer Active Sensors for Structural Health Monitoring,” Journal of Intelligent Materials Systems and Structures, Vol. 16, 2005, pp. 291–305. Kundu, T. and K. Maslov, “Material Interface Inspection by Lamb Waves,” International Journal of Solids and Structures, Vol. 34, 1997, pp. 3885–3901. Lanza di Scalea, F., H. Matt, I. Bartoli, S. Coccia, G. Park and C. Farrar, “Health Monitoring of UAV Wing Skin-to-Spar Joints Using Guided Waves and Macro Fiber Composite Transducers,” Journal of Intelligent Materials Systems and Structures, Vol. 18, 2007, pp. 373–388. Lanza di Scalea, F. and S. Salamone, “Temperature Effects in Ultrasonic Lamb Wave Structural Health Monitoring Systems,” Journal of the Acoustical Society of America, Vol. 124, 2008, pp. 161–174. Lee, H.-L. and D.A. Saravanos, “The Effect of Temperature Dependent Material Properties on the Response of Piezoelectric Composite Materials,” Journal of Intelligent Materials Systems and Structures, Vol. 9, 1998, pp. 503–508. Lee, B.C., G. Manson and W.J. Staszewski, “Environmental Effects on Lamb Wave Responses from Piezoceramic Sensors,” Material Science Forum, Vols. 440–441, 2003, pp. 195–202. Lowe, M.J.S. and P. Cawley, “Applicability of Plate Wave Techniques for the Inspection of Adhesive and Diffusion Bonded Joints,” Journal of Nondestructive Evaluation, Vol. 13, 1994, pp. 185–200. Mal, A.K., P. Xu and Y. Bar-Cohen, “Leaky Lamb Waves for the Ultrasonic Nondestructive Evaluation of Adhesive Bonds,” ASME Journal of Engineering Materials Technology, Vol. 112, 1990, pp. 255–259. Manson, G., G. Pierce, K. Worden, T. Monnier, P. Guy and K. Atherton, “Long-Term Stability of Normal Condition Data for Novelty Detection,” Proceedings of 7th International Symposium on Smart Structures and Materials, San Diego, Vol. 3985, 2000, pp. 323-334. Matt, H., I. Bartoli and F. Lanza di Scalea, “Ultrasonic Guided Wave Monitoring of Composite Wing Skin-to-Spar Bonded Joints in Aerospace Structures,” Journal of the Acoustical Society of America, Vol. 118, 2005, pp. 2240–2252. Michaels, J.E. and T.E. Michaels, “Detection of Structural Damage from the Local Temporal Coherence of Diffuse Ultrasonic Signals,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, Vol. 52, 2005, pp. 1769–1782. Nagy, P.B. and L. Adler, “Nondestructive Evaluation of Adhesive Joints by Guided Waves,” Journal of Applied Physics, Vol. 66, 1989, pp. 4658– 4663. Pilarski, A. and J.L. Rose, “Lamb Wave Mode Selection Concepts for Interfacial Weakness Analysis,” Journal of Nondestructive Evaluation, Vol. 11, 1992, pp. 237–249. Rokhlin, S.I., “Lamb Wave Interaction with Lap-Shear Adhesive Joints: Theory and Experiment,” Journal of the Acoustical Society of America, Vol. 89, 1991, pp. 2758–2765. Rose, J.L., K.M. Rajana and M.K.T. Hansch, “Ultrasonic Guided Waves for NDE of Adhesively Bonded Structures,” Journal of Adhesion, Vol. 50, 1995, pp. 71–82. Rose, J.L., Ultrasonic Waves in Solid Media, Cambridge, Cambridge University Press, 1999. Salamone, S., I. Bartoli, F. Lanza di Scalea and S. Coccia, “Temperature Effect on Guided Wave Based Macrofiber Composite Transduction,” Materials Evaluation, Vol. 66, 2008, pp. 1071-1076. Salamone, S., I. Bartoli, F. Lanza di Scalea and S. Coccia, “Guided-Wave Health Monitoring of Aircraft Composite Panels under Changing Temperature,” Intelligent Material Systems and Structures, Vol. 20, 2009, pp.1079– 1090. Seifried, R., L.J. Jacobs and J. Qu, “Propagation of Guided Waves in Adhesive Bonded Components,” NDT&E Inermational, Vol. 35, 2002, pp. 317–328. Sherrit, S., G. Yang, H.D. Wiederick and B.K. Mukherjee, “Temperature Dependence of the Dielectric, Elastic, and Piezoelectric Material Constants of Lead Zirconate Titanate (PZT) Ceramics,” Proceedings of Smart Material Structures and Systems, Bangalore, India, 1999, pp. 121–126. Sohn, H. and C.R. Farrar, “Damage Diagnosis Using Time Series Analysis of Vibration Signals,” Smart Materials and Structures, Vol. 10, 2001, pp. 446–451. Sohn, H., C.R. Farrar, N.F. Hunter and K. Worden, “Structural Health Monitoring Using Statistical Pattern Recognition,” Journal of Dynamic Systems, Measurement, and Control, Vol. 123, 2001, pp. 706–711. Todd, M.D., K. Erickson, L. Chang, K. Lee and J.M. Nichols, “Using Chaotic Interrogation and Attractor Nonlinear Cross-Prediction Error to Detect Fastener Preload Loss in an Aluminum Frame,” Chaos: An Interdisciplinary Journal of Nonlinear Science, Vol. 14, 2004, pp. 387– 399. Worden, K., H. Sohn and C.R. Farrar, “Novelty Detection in a Changing Environment: Regression and Interpolation Approaches,” Journal of Sound and Vibration, Vol. 258, 2002, pp. 741–761.
Usage Shares
Total Views
70 Page Views
Total Shares
0 Tweets
0 PDF Downloads
0 Facebook Shares
Total Usage