Recently, ceramic matrix composites (CMC), a type of fiber-reinforced composite material, are being developed intensively. CMC is a material in which ceramic fiber is reinforced with also a ceramic matrix. It is characterized by such properties as light weightness and high heat resistance. One of the major promising applications of CMC is in the area of aircraft engine parts as it can considerably improve fuel consumption efficiency. The general forming process of CMC is briefly explained in the following. First, several hundred to one thousand ceramic fibers are bundled to prepare a yarn (fiber bundle), and these prepared yarns are woven into a fabric. There are several methods for weaving the yarns. This paper focuses only on three-dimensional weaving, which is a method of weaving from three directions (X, Y and Z directions) to prepare a fabric. Figure 1 (a) shows a sample of a CMC part made by three-dimensional weaving. Here, the orientation of the yarns in the formed CMC part serves as one of the critical factors determining its strength. Thus, it must be carefully checked for meandering, deviation, rupture, etc. In this study, we aim to develop a method for evaluating fiber orientation using industrial X-ray CT images of the CMC part. After the fabric is prepared, a matrix of the composite material is formed using CVI (Chemical Vapor Infiltration) and PIP (Polymer Impregnation and Pyrolysis) processing. Such a matrix decreases the contrast of CT images of the fabric drastically. For this reason, we apply CT scanning to the part before the CVI processing.
1. Knutsson, Granlund, Signal Processing for Computer Vision, Springer, 1994.
2. Lindquist, W.B., 3DMA-Fiber:A Software Package for Automated Analysis of Fiber Structure in 3-D Computed
Microtomography Images, http://www.ams.sunysb.edu/~lindquis/3dma/3dma_fiber/3dma_fiber.html.
3. Shinohara, T. et al., Extraction of Yarn Positional Information from a Three-dimensional CT Image of Textile Fabric
using Yarn Tracing with a Filament Model for Structure Analysis, Textile Research Journal, Vol. 80, No. 7, pp. 623-
4. Yamauchi, Y. et al., Extraction of Woven Yarn of Ceramics Matrix Composite Parts with X-ray CT Scanning, Proc.
Conference on Industrial Computed Tomography (iCT 2014), Shaker Verlag ISBN 978-3-8440-2557-6, pp.87-93 2014.
5. Viguié, Jérémie et al. A Method to Identify Fibres with Complex Cross Sections within 3D Images of Disordered
Fibrous Media. Application to Fibre Bundle Reinforced Polymer Composites, Proc. ICTMS 2013, pp.207-210, 2013.
6. Lohmann, Gabriele, Volumetric image analysis, Wiley, 1998.
32 Page Views
0 PDF Downloads
0 Facebook Shares