This is the second in a series of articles on the use of 3D imaging for nondestructive testing. The first article discussed the basics of 3D imaging and focused on laser triangulation and structured light techniques. This article will focus on the application of 3D imaging in the assessment of corrosion on pipelines. In this application, 3D imaging will be used to identify areas of corrosion, determine the maximum amount of metal loss, extract the river bottom profile, and calculate the remaining strength of a pipeline.
ASME, 1991, ASME B31G-1991: Manual for Determining the Remaining Strength of Corroded Pipelines, The American Society of Mechanical Engineers, New York, NY.
Eiber, R.J., W.A. Maxey, A.R. Duffy, and T.J. Atterbury, 1967, “Investigation of the Initiation and Extent of Ductile Pipe Rupture. Quarterly Progress Report, July–September 1967,” Technical Report, Battelle Memorial Institute, Columbus, OH.
Eiber, R.J., W.A. Maxey, A.R. Duffy, and T.J. Atterbury, 1968, “Investigation of the Initiation and Extent of Ductile Pipe Rupture. Quarterly Progress Report, October–December 1967,” Technical Report, Battelle Memorial Institute, Columbus, OH.
Kiefner, J. F., W.A. Maxey, R.J. Eiber, and A.R. Duffy, 1973, “Failure Stress Levels of Flaws in Pressurized Cylinders,” part of STP536 Progress in Flaw Growth and Fracture Toughness Testing, eds. J. Kaufman, J. Swedlow, H. Gorten, J. Srawley, R. Heyer, E. Wessel, and G. Irwin, ASTM International, West Conshohocken, PA, doi: 10.1520/STP49657S.
Kiefner, J.F., and P.H. Vieth, 1989, A Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe, Final Report on Project PR Project PR 3-805, Pipeline Research Committee, American Gas Association, Washington, DC.
Maxey, W.A., J.F. Kiefner, R.J. Eiber, and A.R. Duffy, 1972, “Ductile Fracture Initiation, Propagation, and Arrest in Cylindrical Vessels,” part of STP514 Fracture Toughness: Part II, ASTM International, West Conshohocken, PA, doi: 10.1520/STP38819S.
Osage, D.A, 2003, “API 579: A Comprehensive Fitness-for-Service Standard,” ASME 2003 Pressure Vessels and Piping Conference: Flaw Evaluation, Service Experience, and Reliability, Cleveland, OH, pp. 71–84, doi:10.1115/PVP2003-2028.
43 Page Views
0 PDF Downloads
0 Facebook Shares